No administrator by an error account?

Similar Questions

• I changed my account from administrator to a limited account user, now I can't login as administrator

  I changed my account from administrator to a limited account user, as I had 2 accounts of users, two administrator accounts. Now I can't login as administrator. I can't find the administrator and any other accounts show that when I try to switch users.

  If you have seen that the users you listed: that's all nothing.  If your account was listed as an administrator, then it is what it is.  It does not change when you restart the system.  ;-)

  Initially, you said that you have CHANGED your limited user account:

  I changed my account from administrator to a limited account user, as I had 2 accounts of users, two administrator accounts.

  Given that, you didn't have and still two active accounts.  If your account is displayed in Mode safe (when you connect as built-in administrator) as an administrative level account - it still is.

  Was able to go in the control group/user accounts. He was the administrator, my account administrator and one guest account haven't turned on do not.

  Information about Windows XP HOME Edition and the built-in Administrator account:
  http://WindowsXP.MVPs.org/Admins.htm
  (... and how you can make it visible in normal mode again - the reason for which it automatically logs in has two components.  (1) you have no password on 'your account' and 2) you have two directors and so integrated is hidden).

  Try this (in normal mode).

  Start button--> RUN
  OR
  'Windows key' + R

  Type:

  cmd /k net localgroup administrators

  It should bring up a prompt with information.  What is listed under the:

  Members
  --------------------------------------------

  article?

  Same idea, different order...

  Start button--> RUN
  OR
  'Windows key' + R

  Type:

  cmd /k net localgroup users

  It should bring up a prompt with information.  What is listed under the:

  Members
  --------------------------------------------

  article?

• CANNOT PROVIDE ADMINISTRATIVE PRIVILEGE TO THE ACCOUNT

  HI GUYS

  I REINSTALLLED MY WINDOWS VISTA HOME PREMIUM WITH THE HELP OF MY RECOVERY DISK. WINDOWS CREATES A DEFAULT ACCOUNT WITH ADMINISTRATIVE PRIVILEGES. BUT WHENVER I DOWNLOAD SOMETHING ON MY PC, I SAID THAT YOU DON'T HAVE ENOUGH PRIVELDGES TO PERFORM THIS ACTION. EVEN WINDOWS IS UNABLE TO DOWNLOAD THE UPDATE, IT CITIES EVEN REASON.

  PLEASE HELP ME ON THIS ISSUE.

  Go to start / Control Panel / user accounts and check that it is said administrator under the account name that you use.  If this is not the case, he is not an administrator account.  See if itwill allow you to click on manage other accounts (but can refuse you because you are not an administrator).  If you can find any account that said administrator under the name.  This is the account that you need to connect to make the necessary changes.

  If you have no other Admniistrator accounts on your system, enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you forgot the password or all the passwords you use usually do not work, try anything as long as it's probably what you (or seller) did during the installation.  Use this account to replace the other administrator account and also to create a second account administrator in case of emergency.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not find 'Run as administrator' in my user account

  I couldn't update Java in my user account.  I need access to my administrator account, until I can go online to find and download the update.  Cannot find the 'run as administrator' in my user account.  Is it still available?

  Hello

  Please keep us updated.

  You can follow the below mentioned articles and check:

  What is auto update of Java? How do I change to notify settin

  http://www.Java.com/en/download/help/java_update.XML

   

  What is User Account Control (UAC) in Microsoft Windows

  http://www.Java.com/en/download/FAQ/UAC.XML

  I also suggest you to check the steps of Marilyn O in the link mentioned below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Java-update-problem/ef703cb4-44AD-4f61-9dbe-3c46cadd42e3

   

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

   

• Registration media Cetner Netflix error - "" ACCOUNT ERROR: there is a problem with your account. "" Please sign in again'

  original title: error problems Media Center Pinterest account

  Windows Media Center is not allowing me to connect to my netflix account. I get "ERROR ACCOUNT: there is a problem with your account." Please sign in again". I log out and try to connect again and get the same error on several machines.

  Can I use IE9 to see netflix with no problems.

  I called Netflix to see if it was something wrong with my account and they said that everything was in order and that they were getting a number of calls on the same subject. They also said that they have no connection with the plug-in and it is managed by Microsoft and sent me to this website.

  So now I'm here.

  Anyone else having these issues? Anyone know of a fix?

  Thank you.

  There was an update that went down yesterday but I have not tried Netflix on WMC until this morning and it works!  I also noticed that it works much faster than before.  So, if its on the side of Netflix or Microsoft side or together, I'm glad something worked!   Thank you!!  PS next time please better coordinate.

• Upgrade to 8.1 fails "you must use an account with administrator privileges to install Windows 8.1." "Try loggin with the user of an administrator on this PC account and try the update again.

  Hello

  I have some difficulties to try to upgrade to windows 8... The computer asked me to go to 8.1, I click OK and it sends me to the store. Then I click on "Download Windows 8.1 Pro" and I get the message:
  "You must use an account with administrator privileges to install Windows 8.1." Try loggin with the user of an administrator on this PC account and retry the update", as shown in the attached picture.

  The thing is that I am the only administrator account.
  I also checked enable the built-in Administrator, by logging in and trying to here, but from the account built-in administrator is not aloud me to use Store.

  What can I do? Thank you

  Original title: upgrade Windows 8 Pro x 64 to Windows 8.1

  Hello

  I've read reports that uninstalling Windows Update KB2871389, and then put it back solves the problem.

  I read recently that this Fix - It might help...

  http://support.Microsoft.com/kb/971058/en-us

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• FDM error: ACCOUNT - key in dual card values Violations!

  I get "error: ACCOUNT - key Violations duplicate card values! during the loading of FDM data file. I tried a few options such as the removal of duplicate lines, it did not work.

  Thank you

  MB

  I deleted mapping exists and it recharged. It's working now. Thanks for all your replies.

  MB

• 8, no access to the administrator of the Windows account to all the

  Serious problem.
  I tried a lot of things, and that's what I remember to have done:

  It all started when my user account (Administrator) on windows 8 appeared with an error so I couldn't connect.

  The system connect as a guest instead.

  Then, I created a new normal account.

  Then I activated the build in the administrator account.
  I thought I solved the problem, I have not. But I have disabled the build in the account of administrator again.

  AND NOW, I can't get turned on again because every time I try to open msconfig or commando promt or such it ask me the password on the first account, with the error. SO I'm totally lost here.

  Help, please

  Hello

  If you are unable to access the original account, try to create an other administrator account that you can use.

  If you are unable to do this, you may need to use one of the restore options to repair corruption in user accounts.

  See the following Web site for 3 recovery options that you can use.

  How to restore, refresh or reset your PC - help of Microsoft Windows:

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Concerning

• E-mail ERROR account

  I just launched my new website and when I add a specific to this site e-mail address, I receive the following message

  'Error for that user account details can only be updated through the site where it was created first'

  This email has been the old e-mail address of my client and now he loses all the messages!

  

  

  If you coiuld please help me?

  Hey guys, I found a way to fix many of these problems. Well, it worked for me. I hope it will work for others.

  Problem #1: "of the error for this user account Details can only be updated through the site where it was created first."

  Solution:

  1. Sign in to the administration console with the user name and password for the e-mail account that you are trying to install.
  2. Place the cursor on the name of the users towards the top right of the screen. "Eric Platt" in my case.
  3. Click on "my details".
     
  4. Change the "Default Site" drop down to the site that you use for e-mail.
     
  5. Click Save
  6. Try setting up the account to e-mail again

  Problem #2: No activation e-mail / password setup email

  Solution: After you create the account email to a current site administrator and you do not have (I never have) not received the email, it is said that he sent, follow these steps.

  1. Sign in to the administration console with the user name and password for the e-mail account that you are trying to install.
  2. Place the cursor on the name of the users towards the top right of the screen. "Eric Platt" in my case.
  3. Click on "my details (NOTE: you now have a link for"Web Mail"that works, but this isn't the point of this).
  4. Change the password (you can change it to what it was immediately if you want). This allows to synchronize the email with the password admin password.
  5. Now you can connect to the webmail (e-mail. YourSite.com) or window Outlook, Mac Mail, iPhone etc...

  I hope this helps others avoid stress I've experienced!

• 38.1.0 download error accounts gmail messages to other e-mail accounts in chrome-related work. Needd FIXED TLS/SSL on Gmail.

  After updating to 38.1.0 Tbird will download is more emails from my two gmail accounts. I have another e-mail account that works very well. When I look at the error console I see "TypeError: tab is undefined chrome://messenger/content/tabmail.» XML"I also get a warning on the console it says"using Mutation events is amortized. Use Mutationobservers instead. chrome://calendar/content/widgets/calendar-widgets. XML"and two messages one: could not read the chrome manifest ' queue: / / / C:/Program % program 20Files % 20 (x 86) /Mozilla%20Thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd %7 D / chrome.manifest'. And the second says: could not read the chrome manifest ' queue: / / / C:/Program % program 20(x86) /Mozilla % 20Thunderbird % 20Files / chrome.manifest'.
  All three e-mail accounts are POP and I had no problems before the update to 38.1.0. I received a bunch of Microsoft updates yesterday as well. I don't have or use chrome and I do not use the calendar or the Messenger. Can you help me? Thank you.

  I strongly suggest using the parameter of the recommend.as Google account a minimum.

  See https://support.google.com/mail/troubleshooter/1668960?hl=en#ts=1665018, 1665144
  This translates. ;
  Entrants

  • Server:imap.gmail.com
  • Port: 993
  • Connection security: SSL/TLS

  Outgoing (SMTP) mail

  • Server: smtp.gmail.com
  • Port: 465 or 587
  • Connection Security: STARTTLS
  • Requires authentication: Yes
  • Authentication method: Normal password

  Full name: [your name]
  User name: your Gmail address ([email protected]). Google Apps users, please enter username@your_domain.com
  E-mail address: your Gmail full address ([email protected]) Google Apps users, please enter username@your_domain.com
  Password: your Gmail password

  It is possible with Thunderbird 38 authenticate using oAuth2 instead of the Normal password. This means that you don't have to activate applications less secure on your gmail account.

• Twitter account null causes error accounts on the Internet

  Today, I noticed a Twitter account with null values in my Internet accounts and when I try to select this account to remove, an error occurs and the Internet account is closed. How can I fix it?

  Console log error:

  03/03/16 00:30:28, com.apple.xpc.launchd [1 111]: (com.apple.preferences.internetaccounts.remoteservice [586]) Service was released due to the signal: invalid statement: 4

  03/03/16 00:30:28, com.apple.xpc.launchd [1 128]: (com.apple.ReportCrash [587]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  03/03/16 00:30:28, ReportCrash 542 [587]: report of incidents recorded for com.apple.preferences.internetaccounts.remoteservice [586] version 258 (258) to Users/luizfernandomiller/Library/Logs/DiagnosticReports/com.apple.preferences. internetaccounts.remoteservice_2016-03-03-003028_MacBook-Pro-de-Luiz-Miller.CRAs h

  

  

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.internetaccounts

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item named "com.apple.internetaccounts". Move selected item to the trash. Test.

  If there is no change, repeat with this line:

  ~/Library/Preferences/com.apple.internetaccounts.plist

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Can I set up an account as an administrator, but control what account?

  I can put my children as his own administrator and still control what they pull up

  Hello

  I would say you set the standard for your children account, because in the administrator account, you will have permissions to install, uninstall and remove a lot of things, so it is very difficult to verify what they shoot.

  You can also check these links:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-control-with-parental-controls

  It will be useful.

• I forgot the password on the administrator in Vista user account, is there a way to get around this?

  have a dell computer with a hard drive partitioned, which has vista with 2 user accounts with my administrative password which I have forgotten, or it got corrupted and a second account username I can always access.  2 other partitions are a D and Windows 7 recovery on the 3rd drive.

  So I have access to the internet but cannot make any changes on the disk of Vista due to permission problems that require the password.

  I made a disc of ophcrack, but I can't seem to work and produce results other than the vacuum automatically

  any suggestions?

  * original title - forgotten password on my user account which is the level of the administrator, so no matter what I try, it takes the password to get approval... . How do I get around this? *

  Hello

  I'm sorry, but the strategy of microsoft in these forums is that no assistance will be given about lost or forgotten passwords and can help you certainly not with the cracking of passwords tools

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• CHOOSE BETWEEN STANDARD OR ADMINISTRATOR WHEN CONFIGURING THE ACCOUNT TYPE

  Windows recommends the introduction of standard user account Type no administrator because it is safer for the calculation of daily. I'm the only user who will never access my computer, why not choose administrator? Windows don't warn me (are you sure? Yes/No) if I try to edit or delete anything either by performing security or computer works? If not, please give an example of what could happen by choosing administrator. It's annoying to have passwords Setup and answer Yes or no jump - up when I have to.

  Thank you ~ T. Mustela

  In Windows Vista, you have the new feature called UAC, user account control. If it's on then whenever you try to do Admin tasks he will warn you though that you operate in admin account. If you want to use the administrator account, then make sure that user account control is enabled, check in the control panel in the Windows Security Center, if it is turned off it will show you.