No audio connection Qosmio F30 to LCD TV

Similar Questions

• Can I connect Xbox on the Qosmio F30?

  Hello

  I recently purchased a Qosmio F30-117, and I was wondering I was able to connect my xbox and play on the computer? If the answer is Yes, how would I go all this?

  Hello

  As far as I know you it s possible to connect the new Xbox 360 for the Qosmio G20. But I put t see any reasons why it shouldn't t works with F30.

  The F30 has also comes with MCE 2005.
  I recommend you check this Microsoft link.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Also in the manual you will find a description how to connect a 3rd party like the Xbox 360 in the Qosmio laptop.

• Qosmio F30-117: Impossible to establish FTP connections

  I have a Qosmio F30-117, windows XP, Norton Internet security.
  When I try to FTP to my site I get FTP connection failed.

  I tried it on a friends computer and the connection has been established the first time.
  When I joined my laptop to its broadband - no FTp connection. This eliminates at least my router.

  I tried to disbale parts of Norton Internet Security, without success.

  Help?

  Hello

  so if I were you I would completely disable the Norton software and make sure that the Windows Firewall is to leave you hollow. If not, you should check if your friend has put in place properly. If you want to test that your machine is able to connect via FTP, then go to www.kernel.org and enter an ftp address.

  Open your favorite FTP client, and then try to connect. If the connection fails really then double check all the settings and try again. I think that the problem is so low that everybody he oversees everything. ;)

  Welcome them

• Connection S/PDIF on Qosmio F30-111

  Hello, I need some information on the use of the digital audio output on qosmio.

  It seems to have a 3.5 s/pdif out Jack (shared with headphones).

  There are 2 audio cables type digital: toslink optical and coaxial 75 Ohm RCA.

  Is possible to use a coaxial cable with a 3, 5 mm jack to RCA converter?
  Or the only way is to use a cable with 3.5 jack converter toslink optical?

  It's RCA-> Jack 3, 5mm Converter: http://aka.fotovista.com/dev/3/3/46000533/g_46000533.jpg
  It's cable Toslink, Jack 3, 5mm converter and more: http://aka.fotovista.com/dev/7/5/46000157/g_46000157.jpg

  I'm not an audio specification, but I found some interesting info:

  (1) coaxial RCA is the most popular Digital Audio connection. Cables and connectors have an impedance of 75 Ohm and used to connect DVD players, CD and some DAT recorders to multi-channel surround sound (Dolby Digital, DTS, etc) equipment. RCA is often replaced by BNC connections on certain high end equipment.
  (2) Toslink is a coaxial digital audio connection fiber optical version and is used in the same applications as the coaxial. Most of the newer devices has a connection to toslink cables. In applications where the source or receiver has only coaxial connections the signal can be converted to Toslink using a decoder.

  In my opinion if you want to use the SPDIF digital audio output, so you must use cable Audio optical Toslink/SPDIF.

• Qosmio F30: Can not connect to internet with WiFi safely

  I recently purchaced a Toshiba Qosmio F30 laptop and have spent the better part of two days trying to connect to wireless internet. After constantly call Wanadoo (my provider) and accusing them for all this, I thought that the laptop itself is at fault.

  What happens is when I try to enter my network key (WEP), default is a different key that I can't see that it's all in the points! This continues to be and im am totally unable to enter my network key. Until it is I turn off security on my livebox thingy and connect unsecurely and as I live in close proximity apartments, other people can and probably will connect to my internet, and I am also told that makes me more at risk of viruses and other.

  I apologize for my lack of technical jargon, and that I can not give a more descriptive... uh... description, but I'm just a beginner and not the most in computer science.

  Any help would be appreciated more!... Why is nothing simpler!

  Hi Luke,.
  Have you tried WAP (shared key) instead of WEP.
  In this way, you will need to make your own key instead of having the it generated by the router.
  It is also safer.

  To do this, you must enter the settings of your router (usually http://192.168.1.1 or http://192.168.0.1), enter the password provided by Wanadoo, then click Security. Change the setting WEP WAP (or shared key) and enter a 10digit password then you will need to enter it again when your computer tries to connect to the router again.

  It is best to use a wired connection to change settings, then disconnect the cable and wireless.
  If you notice that you are connected wireless to the router, and your internet connection is dead, temporarily disable the LAN (reactivate when you are satisfied with your connection works). This would happen if your computer includes your wireless network connection to other computers and the wired connection like you internet connection (even if there is no wire connected).

  It is also important to change the administrator name and password to access your router (this would prevent your neighbors children playing to change your settings).
  Let me know if you have more problems.

• Qosmio F30 audio driver for Windows Server 2008

  I'm only running a virtual machine with Windows Server 2008 installed. The server sees my Sound Driver, but it does not recognize it and ask for driver all the time. I tried running the installer of Sound Driver from the CD, but it didn't work, said: not supported operating system. I tried a driver all over the web and I found none. Can someone help to find this driver for me or let me know it it is possible to manually install this driver?

  I will be grateful for any help.

  As you probably know that Qosmio F30 is not designed to be used as a server and general support Toshiba doesn t Server2008. All you can do is to identify the manufacturer of the sound card and try to find the driver on its support page.

  Boyfriend sorry but that s all I can say about it.

• Qosmio F30-140: how to work with composite distance or video function

  Hello

  I used version of windows XP MC, but now I switched to windows 7 64 bit version and I do not know how the composite-in or the video function works.
  Win 7 driver supports this feature! or I need to use another software to use?

  Another thing miss me in this new version of windows is the equalizer effects of Dolby.

  You could any body tell me how to add this option to my card the device or send me a driver that has this option.

  Thanks in advance.

  Hello

  All I know is not a complete Win 7 support for Qosmio F30.
  I found some Win 7 32 bit drivers on the driver page, but there is no 64-bit drivers.

  There are Vista 64 bit drivers verifiez_ the!
  Sigma audio driver is now available for Windows Vista 64-bit. Try it!

  The composite or video port can be used to receive video signals from external devices. For example, you can connect an Xbox to the F30 and can use it as part of Windows Media Center.
  http://www.Microsoft.com/Windows/Windows-Media-Center/default.aspx

  You also can conenct a camcorder or similar device.

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• Qosmio F30-133 is not working properly

  Good evening.

  I seriously need help with a problem with my qosmio F30.
  After that I have included, to produce:
  1. on the screen, there are thin white stripes. But he continues to be loaded.
  2. There is a Windows XP loading window.
  3. After this, the screen goes black and the computer more shows nothing.

  I did the following:
  1A loaded a safe mode.
  2 a disconnected the video of the device. (Nvidia GF 7600).
  3 and the computer was loaded by the device - video standard.
  4. after registration of the video of the device and update the screen options, the problem appears again.
  5. driver updates did not help.

  How can it be a problem? What can I do?

  Kind regards.

  PS Excuse my (English)

  UPD.
  I enjoyed a forum and found a lot of interesting on a similar problem.
  -White stripes on the screen appear to load XP. They are absent on the Toshiba start screen.
  -To connect external monitors, the problem doesn't go away.

  Post edited by: Alexrus

  Post edited by: Alexrus

  Hi Alexrus,

  as windows loads successfully, as you said that the problem appears to be associated grafics.

  so lets see what we have:
  -broken grafics Board > I think it's her
  -broken lcd > I do not think that because the lights are on, and you can still see anything
  -bad son > failure should exist only in a particular point in the oppening of the lid > no
  -a bad bios > there's always more problems if your bios isn't good > no

  I think that it is curable by changing average material grafics Board.

  to be sure to see a servicepartner and ask for help.

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• Re: Problem with Qosmio F30-140 VGA card

  Hi all

  My Qosmio F30 suddenly developed a green lines/pixels on the screen. The same problem exists even before logining windows.
  The card (nvidia go 7600) video under the device manager has a yellow triangle with an exclamation mark inside. I tried reinstalling the VGA driver, but nothing has changed.
  I think it is a hardware problem (GPU), but I don't know if there is anyway to fix it. Please notify.

  It's certainly the hardware problem. What you can do to confirm this is to connect external monitor to your laptop to see if the same thing will happen. If so, the GPU is defective and if not display's troublemaker.

  What you can do to solve this problem? Not much. Material exchange is your only solution.

• Qosmio F30-112 - small strips and dots on the screen

  Hello

  I need help, my laptop (Qosmio F30 - 112) have a problem.
  When I started it scratch on the screen and flashes.
  Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
  I checked it on the Device Manager NVIDIA GForce with a yellow mark.
  I tried to uninstall it but nothings happened.

  Please some body help me what to do in this case?

  And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

  Thank you
  rtmasagca

  Hello

  Have you tried to install or update the display driver?
  Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

  Otherwise, it could be a GPU problem.
  This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

  If Yes, then it s certainly a GPU problem.
  In this case, only the replacement of the motherboard might help.
  Also, upgrade is not possible.

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Qosmio F30: installed new drivers now no sound.

  I have a Qosmio F30 (PQF32), have just started to use Driver Detective to update the drivers, problem is now I have no sound.
  Control Panel says no. Audio Device, and more when I boot it says new hardware found PCI but can not find the driver.
  Would appreciate any help to restore the sound on my PC... "Not impressed with Driver Detective".

  Hello

  Why you n t back to the first version of driver sound?

  You could do this driver download sound manually from the European pilot of Toshiba page.

  Then delete the old driver from the Device Manager (uninstall) and after rebooting again install the new downloaded driver.

  Usually, it should work!