No Audio in after effects CS5.5 (Even after rendering)

Similar Questions

• Prpro cs5 recompress even if rendered setting is the same as pre-rendering parameter

  This could be tough to answer. I am modifying a project which was shot using P2 DVCPRO HD. I have all pre-rendered on the timeline as MXF files. If I turn the timeline by using the exact same setting as the PreRender will it recompress anyway?

  
  Who is?

  You mean you want to export to a P2 MXF to a sequence of P2 MXF, which has already been made in DVCPROHD MXF, correct? I'm guessing that, as long as you check the 'Use rendered previews' in export settings, first will be more or less do a copy operation of your MXFs melted into the new destination of MXFs, if the files are split into pieces of 4 GB by the specifications of P2.

  You can try to export a little short of your sequence with these settings, import the video and put it on top of your original; set its mode of transfer to the difference and toggle to view the Y/C signal in your program monitor. As long as you don't see anything else than a continuous line at 0 IRE with no "fuzz", you can be assured that no reprocessing Executive took place (even if the speed of export will be a good, albeit less scientific, seeing this as well).

• Adobe after effects cs5.5 mac

  I want to get adobe after effects cs5.5 for mac, I can't seem to find it anywhere, and I don't want to use cs6 bacause how bad it is on mac?

  You can buy only the current versions and which means CS6. Your only chance to get CS5.5 would be a license used by someone else, but even in this case, you will need to make a good transfer of Adobe product license.

  Mylenium

• After effects CS5 and 3D plugins Boris BCC7 objects 'Dynamiclink error' and AF to close

  Hello:

  I write graphics company where we have 4 computers (2 are HP Z800 and 2 other HP Z400) after effects CS5

  and a year ago, we bought 4 licenses for Boris Continuum Complete 7 AE plugins

  In the HP Z800 computers 2, we have a problem with the plugins 3D BCC7 BORIS Boris objects. The other Boris Continuum Complete 7 AE plugins work correctly.

  Other computers 2 HP Z400 all plugins go OK including BCC7 BORIS Boris objects

  Each computer has Windows 7 and NVIDIA graphics Quadro 5000
  

  I have attached a printscreen where you can see the errors that occur after effects. At the end of the program is closed

  Well, if the question is so specific, you can contact BorisFX' rely on this. Also make sure that your graphics Setup. Even if the cards are the same, you may be using different drivers or have a different screen configuration that causes these problems...

  Mylenium

• after effects cs5 - quicktime h264 of very large file size

  Hello

  I wonder if someone can recommend a codec quicktime good for very small file sizes, for overview makes.

  project in progress - my wmv renders out approximately 10 MB and of reasonable quality that is excellent.

  some of my clients have flip for mac, so I have to make a quicktime.

  the quicktime h264 out much more than expected. same timeline, pixel dimensions and speed = approximately 150 MB and a similar quality.

  I thought that in the past my QT h264 renders were perhaps double the size of my wmv file renders more leap of 15 x.

  am I missing something really obvious?

  pixel size = 1000 x 250,

  frame rate = 30 images/s,

  Timeline = 4 m 30 s

  H264 quality = 50%

  Audio = aac stereo

  using after effects cs5, win7 pro

  Thanks in advance

  s

  the file size is directly related to the baud rate at which you are encoding, not the size of the image or images per second. So, if you want a 10 sec clip to be 15 MB (excluding noise), divide 15 MB at 10 s and get you 1.5 Mbps bit rate, or 12 Mbps. You can get a better quality if you encode 2-pass VBR with a maximum bitrate set to what you calculated previously.

  In any case, it is usually best to make your comp to a losless format (QT none, or TGA sequence, etc.) and then compress your video with Media Encoder. In this way, you can play with the settings for H.264 until you get an acceptable result, without having to make EI every time.

• After that Effects CS5 hangs on save dialog box

  Hi people, I'm new to the forum. I have a big problem with After Effects CS5. After the program has been open for some time, when I try to save, the program blocks (the first recorded little perfectly fine, if not a little slowly). I can not even close with CTRL + ALT + DELETE, I have to restart my computer. I work on a PC with a processor Intel Core i7 with 24 GB of memory RAM. Running Windows 7 Ultimate 64 bit. Doesn't seem to make a difference how big or small, the project is. After effects is completely up to date, in fact, I installed the latest update today, but it made no difference. I hope someone can help. After Effects is a big part of how I earn a living and this is killing me! Thanks a lot for any help in advance

  Uh, Yes. But where you save? You left out the most important news, and since you speak of records usually slow, it goes without saying that you have a hardware problem here...

  Mylenium

• After effects CS5 hangs when previewing or made

  I installed after effects CS5 on my mac yesterday evening and it crashes whenever I want to listen to samples or make a sequence. I have CS4 installed on the same machine and the same project works very well. I talked to Adobe support three times and went through the same issues with them (three times) and nothing seems to help.

  I installed the same copy of After effects on my laptop and it works very well - the laptop is running OS 10.6.2 and my main machine is running 10.6.3

  I tried to delete the prefs and Open GL drivers, but they also do nothing to help

  Any ideas would be most appreciated?

  You have a bad Quicktime CoDec / component, a plugin obsolete, a bad police or an extension of the system / assistance program is not compatible with Snow Leopard and bunks in turn upward of AE. These assumptions cover 90% of all options. Maybe you can provide some info base on these suspicions...

  Mylenium

• How to see several audio files after dynamic link with After Effects

  Hello.  I'm using Adobe CS4.  I created a dynamic link between After Effects and Premiere Pro.  I have several files audio in my effects after composition, all positioned in approximately the right place in the timeline panel.  Can I still access each of these audio clips in Premiere Pro or first made a composite audio file of all the clips in After Effects?

  If the first is simply lump these in a big audio layer, what' his good workflow for fix all my audio clips?  Can I simply drag each file in a separate first track and reposition manually or is there a way to capture data from After Effects?

  Thank you

  Dynamic Link allows you to import an AE comp in the body, the imported clip is a composite - video and audio. Even if there is no sound in an imported model, Dynamic Link will create an audio track empty - one of the oddities of the DL. Therefore, you have no direct access to individual elements of video or audio clips used in the model of EI, when placed in a timeline of the organization.

  However, you can easily copy elements of film - in your case, audio - editing of your AE comp and paste it into a timeline of the Organization, as described here. I assume you have an animation timed to your audio tracks and want to preserve this - no problem. Just copy the audio clips of the AE timeline, position the CTI in the same relative position in the body and paste. Your audio clips will be placed in as many tracks that are needed (depending on duplication) and you will have access to each individual audio clip in the timeline of the organization.

• After Effects CS5 - Keylight 1.2 pipette crashes on me!

  Recently, I worked on an independent project and I created some green screen footage and tried to edit it in After Effects.
  After that I added the effect 1.2 Keylight to my images, I went to the Eyedropper to click on it and then it crashes on me and gives me an error and stops completely After Effects!

  I managed to take a screenshot of the error popup so that way you guys can see for yourselves.

  

  I thought that, maybe, it has the. MP4 video.  So, I converted the video to a .avi file and tried to apply the same Keylight effect again.  Once I clicked on the pipette, it gave me the same message again and stops After Effects.  I thought maybe it was only the video files that cause problems?  So, I thought I tried a green screen image, and the error came again.  Maybe it's the project file?  Nope.  I started a new publication and added in the video in the composition, added tried 1.2, Keylight effect by selecting the pipette and once more... it still gives me the error.

  The problem is not video or image.  It's the Keylight 1.2 pipette that is causing the error.  I thought that, maybe, I need to update my laptop?  Updated, still the same problem.  The next thing I did was trying to find a way to solve this problem online.  I noticed that there is an update for Adobe After Effects CS5 update 10.0.02.  So, I updated to After Effects and restarted my laptop.  When I went back in After Effects and still applied the same effect and when I tried selecting the eyedropper... gives me an error... once again.

  I'm sorry if this sounds a little repetitive, but I wanted to be thorough in my explanation that I can try to find a solution to this problem.  I really need this to work again because I'm working on a very important project.  It's weird, the Keylight 1.2 never gave me any problems in the past.  It works perfectly at the time.  So, why he does not correctly now?

  If anyone can help me, I would really appreciate it!  Thank you!

  ~ SuperDrummerGirl

  Let me guess, you use Yosemite or newer on your operating system?

  If so, be aware that CS5.5 and earlier are not supported on this OS, so should have weird bugs.

  That being said, go to your preferences and change the use System Color Picker setting and see if that helps.

• After Effects CS5 stuck to the Windows 10 1511 homescreen

  I had been using After Effects CS5 on Windows 10 smoothly for several weeks.  A few days ago I have upgraded to Windows 10 version 1511 (a major update), and now when I launch After Effects, the splash screen is stuck at "Initializing MediaCore."  It never makes it beyond that.  I searched and tried all the troubleshooting methods that I could find.  I have reinstalled QuickTime.  I reinstalled After Effects.  I've updated After Effects.  I have reset and delete the Preferences folder.  I have disabled the firewall.  I rebooted.  I went through the suggested troubleshooting steps.

  Any suggestions or ideas on what could be the problem?  On a perhaps related note, after I updated Windows 10, I had a very strange problem a few times: when I started in Windows, the music started to come out of the speakers.  A little later, I heard static-y voice in speakers.  It was like this by the blue, no Spotify or anything I know.  My laptop picked up somehow radio waves?  Was it a bizarre kind of spyware?  Since then, I scanned with spyware.  Thanks for reading!

  I found the problem after watching Process Monitor from Microsoft.  I had to uninstall Matrox codecs that I had installed quite earlier.  I tried to uninstall/reinstall Quicktime, but failed to remove the Matrox codecs.

• After Effects CS5 does not open? need help

  I have After effects CS5 10.0 on a Mac osx 10.9.5 and whenever I try to open After effects, he said "after effects warning: cannot rename the file ' / users/david/Library/Preferences/Adobe/After Effects/10.0/Workspaces.1660.1407351647116961.xml' to 'Workspaces.xml'. '. I'm not sure what that means or how to do to solve this problem, suggestions anyone?

  fix the permissions problem that prevents to start Adobe applications

• None of my text is rendered. After Effects CS5

  I'm doing a minute-long video portfolio that uses animations, fades and interpolations of base. Any format I save it in, After Effects render text, but which makes all the rest. I use After Effects CS5. I am new to the program so I don't know if I am missing a setting, but I can't find answers.

  Thanks a lot for any assistance.

  Hmmmm... I forgot that if CS 5.5 had Guide layers in it, but she certainly your text layers are somehow given in the form of guide layers - it seems that they make.  See Help on your machine AE 1) see if you can guide layers and 2) see if you did.

• Can I use after effects cs5 in 32-bit?

  Can I use after effects cs5 in 32-bit?

  N ° the last 32-bit version of AE was CS4.

  Mylenium

• I can't use my options of dynamic links to Adobe first CC for Adobe After Effects CS5 is because the versions are different?

  I can't use my options of dynamic links to Adobe first CC for Adobe After Effects CS5 is because the versions are different? I have to use first Cs5?

  Hi Samuel,.

  Yes, usable only between the same dynamic link versions products. You can complete rditing and export a first Pro CC and take it to After Effects for further editing, but dynamic linking is not possible in this case.

  Using After Effects | Dynamics and After Effects links

  Vinay

• Download After Effects cs5

  Hello

  Can someone give me a link to download After Effects cs5 trial

  Thank you

  You candownload the trial version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html