No audio microphone detected

Similar Questions

• No audio device detected

  I bought my second hand laptop, and there is no sound.

  When I go to my iTunes or media player a window pops up saying there is no audio device detected. I'm not very smart computer so if you can help me at all with this please post you anser in terms of can

  Thank you

  Hi rommyd,

  And what laptop you have exactly?

  Have you installed the latest driver from the official site of Toshiba?

• Telepresence C40 intermittent on / off input audio microphone

  Hello

  There was a time that audio input microphone of telepresence C40 goes OFF mode when you start the unit. Also when manually activate us it and end the videoconference call.

  The mode will be automatically extinguished.

  The configuration is C40 entry audio microphone is connected to the mixer of third party.

  Is there no workaround solution to fix?

  Much appreciated for your help. Thank you very much!

  Hi all

  Ralph has opened a case with TAC and arrived at webex. It's just to let everyone know that we were able to solve the problem. Just to convey information. That's what we were doing on the webex session:

  Indeed, we found tha the microphones were shut off as soon as we have disconnected from the call. We checked the following things:

  xConfiguration conference 1 AutoAnswer Mute: Off
  

  xConfiguration MicUnmuteOnDisconnect Mode 1 Conference: on
  

  xConfiguration Provisioning Mode: TMS

  We turned off the MicUnmuteOnDisconnect first and the problem still persists. We have then canceled endpoint of the TMS suspecting that configuration could come from the TMS and checked by calling again. Hoewver, the microphones were always switch off to end the call.

  Finally, we checked the parameters of MuteOnInactiveVideo:

  xConfiguration Audio input Microphone 1 VideoAssociation MuteOnInactiveVideo: on
  

  xConfiguration Audio input Microphone 2 VideoAssociation MuteOnInactiveVideo: on

  We shot both of them off and the problem was solved. Ralph, please check this question as answered so that others can enjoy.

  Kind regards

  Saint André

• Line-In does not detect audio microphone?

  I recently got a new headset, Razer Pro Kraken, and the line does not detect my microphone, I need because I use Skype. I checked and there the audio turned up completely, and I know for sure that the plugs are correct. What should I do to fix this? I am on Windows 7, if it helps.

  And also - I can hear the audio, the microphone right pick up. And I know that he is not a defective product, because I had this problem with previous helmets in the past.

  Hello. Your laptop is an Alienware M14x? Have you tried to reinstall the Realtek audio driver?

  Reinstalling the audio driver will restore the default audio settings. On many models by default is for line-in (off mic amp) then you may need to select again for a microphone and set the mic boost levels.

  I would check the settings both on the recording of the sound Properties tab (right-click on the audio icon and click recording devices, right-click on the microphone and set as the default, right-click the microphone, and then click Properties device, then the levels tab to set the push) and also the microphone of the Realtek Audio Manager tab. I would test the microphone using Windows Sound Recorder instead of Skype.

• Microphone detected but not windows do not receive sounds?

  I use windows 7 Sony Vaio laptop.  My laptop detects the internal mic, but also all other microphones. But it is not picking up all the sounds. My external microphones are working perfect with all the other PCs and mobile devices. I tried the solutions for the following problems, but nothing has worked.

  1. the microphone is close enough to pick up voices. Make sure that the microphone is positioned close enough and you speak directly into it.
  2. the microphone is muted. Some microphones have an external control for muting. Make sure that the mute control is disabled.
  3. the microphone input level is too low. Make sure that the microphone input level is set correctly.
  4. the microphone connections are not properly attached.
  5. a different microphone is selected to be used with speech recognition.

  Help, please.

  Aranya salvation,

  Thanks for posting in the Microsoft Community.

  (1) no this problem occurring in a single computer or other too?

  Let's try steps below and check if it helps:

  1. Right click on the sound icon on the taskbar.
  2. Left click on the Mixer's Volume and raise the slider for Microphone to 100% and make sure that nothing is cut.
  3. Close the Volume mixer; Right click on the sound icon on the taskbar.
  4. Left click on recording devices and retest the microphone.

  If there is still no activity in the volume level indicator, the microphone sensitivity can be reactivated by doing the following:

  1. The window audio always open, double left click on the Microphone.
  2. In the Properties of the Microphone window, click the levels tab and move the microphone slider to 100%. Make sure it is not muted.
  3. Slowly move the Microphone Boost on the right and test the microphone by typing you go.
  4. Click OK and test the microphone again.
  5. If there is still no activity in the volume level indicator, double not left click on the Microphone.
  6. In the Properties of the Microphone window, click the enhancements tab.
  7. Check the option to disable all sound effects.
  8. Click apply and then click OK. Test the microphone again.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you.

• Re: No reading on Satellite L305-5894, Realtek HD Audio Microphone

  To the right:

  I had the problem after two days.

  I bought a microphone so I can register on my computer, but when I plug the microphone I can't hear myself through the speakers (which, in the past, I was always able to do on other machines and the previous operating system), even if I am able to register and listen to the recording.

  Unfortunately, being unable to hear yourslef all kind of defeats the purpose, you have no way to monitor your recording levels. I bought a USB mic yesterday, could not make it work, thought it was the problem, he's back today and bought an analog microphone, but I'm still having the same problem.

  I spent countless hours trying to find a solution, a solution and have developed with nothing else that a player who shows my voice through the speaker, but with a delay of 1 second. Obviously, if an application can process the microphone of the inputs and outputs for the speakers, then Toshiba AND/OR Realtek should being able to provide a solution for the problem of not having read microphone through the computer's speakers when using a microphone, something that I HAVE NEVER COME ACROSS on ANY OTHER MACHINE or with any other card her I HAVE NEVER USED.

  I'm literally begging for a solution to this problem. I'm SURE it can be fixed. Help, please.

  Thank you.

  Hello

  It s a series of Toshiba laptops we so I m not very good on the same parameters.
  But I have a laptop with a Realtek HD audio chip and Panel, there is a Realtek HD audio Manager utility.
  Here, you can change some related settings the microphone and speakers.
  In the upper right corner, you might find 'Advanced settings', which controls the plug mic

  I recommend you play with these options

• No audio device detected Qosmio X 500

  Hello
  I'm new on this forgiving so if I make a mistake. I have some problems with my Qosmio X 500. Recently, there is a red cross next to the speaker in my taskbar. Whem hovering the mouse over it, it says no speakers or headphones connected.

  When right click on detection of problems, it is said that no audio device is connected. In my windows Device Manager it says that everything is connected OK I also downloaded the latest Audio drivers (conexant). Uninstalled the 'old', restart the computer and installed the new. No solution.

  I found on the internet, it is one common problem with other laptops Toshiba, but no solutions have been proposed.

  Help, please.
  Another thing I noticed is that video streamin (Youtube, for example) is suddenly very slow and laggy. Play reviews are no problem.

  Hello

  I put t think that your speakers are silent because in this case the crossed red circle would be visible in the taskbar you said you see a red x so I guess there is a software problem.

  I found a tip useful and interesting to the Microsoft page:
  [On the volume of the taskbar icon shows the Red Cross. Trouble shoot bugs but keeps showing on and off. http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-sound/on-taskbar-volume-icon-shows-Red-Cross-trouble/5f3906da-4d36-44c8-8b39-9884415ce22c?msgId=d7ff90e1-b836-4b71-88de-a4d349bc2136]

  Please check that and post comments

• Audio microphone recording sound recording

  I can't get my internal microphone to work properly.  During playback, my voice sounds like I am taking the floor in a kettle + it is barely audible and resonates as I am 1 million miles, speaking via a satellite connection.  I contacted the technical support of HP, was on the phone for about 3 hours during 2 days; I came home yesterday, the laptop (HP ENVY dv7 - 7333cl Notebook PC) at Costco, where I exchanged for an identical one that has the same problem.  On their recommendation, I downloaded a new audio driver, made updates, and last night I did a full system recovery, but, alas, no better... Help!

  [Moved from comments]

  Hi Tim,.

  What is the operating system installed on your computer?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Follow the steps from the links

  http://Windows.Microsoft.com/en-in/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Can I disable Audio microphones HF of the G20

  Hello

  I use this camera to flow and I have a separate audio setup. I would like to cut all the audio from the built-in camera microphones through the hdmi cable I use for video.

  I can't find how or if I can do it. Is this possible?

  Thank you

  Stephen

  Hi Razor7music,

  When you use your camcorder in manual mode or cinema, you can use the entry 'micro' from inside to outside. Here's how:

  Choose 'Func', then 'MENU', then click on the camera icon, then choose "Mic Input Terminal". Now, press 'Audio LINE', then click on the button «Back»

  Are more completely described and illustrated on page 72 of the Manual of the G20 VIXIA HF.

• No Audio device detected received after upgrade to Vista message

  NO AUDIO DEVICE NOT DETECTED - UPGRADE WINDOWS XP TO WINDOWS VISTA ULTIMATE

  Recently, I switched from Windows XP to Windows Vista Ultimate, and now I have no sound. No audio output device detected. I tried the driver far from Device Manager, still nothing. Driver not installed, rebooted and no change. I was told I need a bus class driver Universal Audio Architecture (UAA) High Definition Audio of Microsoft, but all I can find are those for Windows 7 and XP. What can I do to fix this

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  If Vista Sound Drivers for your Audio hardware are not written, cannot do anything about it.

  See you soon.

  Mick Murphy - Microsoft partner

• No card its audio-not detected

  not found audio data!

  I tried all the items listed on this forum. I've went utube and tried. I scanned and updated all the utensils of soft and hard. always on the red x and no sound. at one point, I had a message that was detected no sound card! someone just help me UNscan this update. I just want me back. It's _!

  No guarantee. See if this link will help you:
  http://support.Microsoft.com/GP/NO_SOUND

  t-4-2

• Audio / Microphone on Laptop Inspiron 15 computer laptop does not not after upgrade to Windows 10

  I have an Inspiron 15 bought mid 2013 with Windows 8 and little used. I just upgraded to Windows 10 and the upgrade was quick and easy.

  Since the update the microphone at full volume can barely be heard (my contacts on Skype hear me at all).

  I tried to install the latest driver of Realtech and also for this device, the Microsoft driver, but makes no difference; I'll be back now the driver original waiting to get some tips.

  It seems that it is a common problem with Windows 10 because there are many similar problems, broadcast on the Microsoft support forums.

  Someone at - it a solution please?   Waiting ;-)

  Graham

  You are not alone because apparently many of us have this problem. Short term solution is to change the driver from Realtek to the generic Microsoft HD Audio Device in Device Manager. The long-term solution will take Dell Realtek + Microsoft to acknowledge the problem and fix the drivers.

• Record without using the audio microphone

  I want to record from a file without using themicraphone on my laptop Inspiron 15 7537.  He had instlled software Realtek but no option to use the IDT internal microphone or Audio CODEC so he picks up background noise which is not good.  When I try to save the only option it is the Realtek microphone.

  Can someone season solution

  Thank you

  dlb21a

  He had instlled software Realtek but no option to use the IDT internal microphone

  Hello. As you say, your laptop has audio Realtek so it is unclear what you mean by "Microphone internal IDT. Dell doesn't use audio Realtek so IDT in the same model of laptop.

  Here are some other ways to save in addition to using the built-in microphone.

  > External mic. Because the Inspiron 7537 only has a headphone jack, you can't use a regular computer microphone which would have a TRS plug, but instead, you must use a headset with a plug from SOCKET that looks like this:

  

  "Headphones" is the headphones with a microphone. You can also use a regular mic which has a TRS plug if you get an adapter to convert it to a plug from SOCKET. The adapter is called a "helmet buddy."

  > A usb microphone.

  > If you want to record a stereo signal, you can do that through your headphone socket because its entry is mono only. To save the stereo, you need an adapter usb audio with a "line-in" socket Don't get one that has only a mic jack because it will be only mono too.

  dlb21a

  I want to record from a file

  > If the file is already in your computer, you can internally record in the computer by selecting 'stereo mix' as default device in the recording of the sound Properties tab. If you do not see the stereo mix, right-click in the empty area of the tab to open the context menu and select "Show disabled devices". (You must have your installed Realtek audio driver).

  

• Windows 7 causing Audio & Microphone to stop working

  I have a Sony Vaio VGN-Z21WN, which came with Windows Vista.  I later upgraded to Windows 7 Ultimate.

  In recent weeks, the audio doesn't work with the microphone.  I tried to install the drivers more late two Sony & Realtek Web sites, but nothing worked.
  Concerned that it was a hardware problem, I did a factory reset and I went back to Vista... audio & new microphone worked perfectly.
  I improved this "clean" Windows 7 ultimate installation, and the problem reappeared.  Yet once, I tried different drivers Realtek & Sony, but nothing of reactive sound.  I even installed all the latest drivers for the chipset, wifi, the latest version of the bios, etc...
  Windows says that the hardware is installed and working properly.  I tried to use headphones, external microphone, etc., but with no luck.
  I believe that a recent update of Windows 7 has caused this problem - is there a fix available?

  I did, thank you.

  I finally discovered - by chance - cause.
  Deletion of my Logitech USB 'nano-receiver' for my mouse wireless solved the problem.  Very surprised this kind of thing can cause such a conflict these days!
  Very grateful for the help, Anil, I hope that if someone has a problem like mine they find this discussion.

• Caused USB audio microphone does not work

  I had a finished project and went to show to a friend. I got a new Blue Yeti USB microphone plugged when I opened the program. Now no audio cannot be heard through my speakers, and in the "audio" section, he said the microphone and the speakers (does not work). Need help please, I have put hours and hours into this project, and don't want it to be for nothing.

  You must go in its input/output of your operating system controls and make sure that you had used the 'standard' output is checked... sometimes connect a USB microphone can get wobbly system. If your standard output work... then go into the preferences panel / Audio Hardware in PrPro as shown below...

  

  My system is using the 'peripheral' Ms. class, but many work better using the Asio option if it's available there.

  Below, also check your default output device..,.

  Neil