No available after upgrade Windows 10 networking hardware

Similar Questions

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• No VR command available after upgrade

  We have recently upgraded to vCenter 5.5.0 2175560 and I then improved the VR for VR 5.5.1.4 device. We had been to vCenter 5.1.x and 5.1.x.x VR (latest version compatible with vCenter 5.1).  I think I did everything correctly. All of the rehearsals that would continue to work, but I can't make changes. For each replicated VM, under Actions, I get "no action available. For unreplicated VMS, "Setting up replication" is grayed out. I have spent a bit of time to research on this problem, but haven't found anything. The first thing that comes to mind is that it is a permissions issue, but I have the Administrator role.

  We use a vCenter to replicate virtual machines between data centers managed by the same server vCenter. At first I thought maybe I should add the vCenter server as target a site, but it looks like this is not necessary when using a vCenter.

  Am I missing something?  Any help would be greatly appreciated.

  Hello

  There is a problem after the VR upgrade:

  shares of vSphere in vSphere Client Web replication not available after upgrade. If you follow the steps to complete the upgrade of the vSphere replication device if the vCenter Server IP change but use vSphere Web Client 5.5 before you upgrade the unit of replication vSphere, actions of replication with the replication vSphere plugin not available.

  Solution: Restart the vSphere WebClient service in Windows Services, or vCenter Server virtual appliance (VAMI) management interface if you are using the vCenter Server Appliance.

  Source: VMware vSphere replication 5.5 Release Notes

  I hope this helps.

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• Network Controller Driver missing after upgrade Windows 7 Home Premium

  I recently installed Windows 7 Home Premium SP1 on my HP G71-340US notebook.  The installation went well except that when the computer is started, I found that the PC did not find any wi - fi connections.  After further investigation, I found that the network controller do not have a driver installed.  I downloaded the latest software of NIC driver on the HP website (via ethernet cable) and directed the pilot.  Updated the Realtek PCIe Controller Family driver, but the driver for network controller did not.  As a result, I could not even connect to wi - fi networks.  The information of the network adapter are listed below for reference.  Your help would be greatly appreciated to resolve this issue.  Thank you.

  Realtek PCIe Controller Family
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C & REV_02
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  You almost have it.

  With the information from the Device Manager, you can determine the vendor and device information:

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086&DEV_0084& SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  If you were to jump off of:

  http://PCIDatabase.com/

  what you see in Device Manager enter your information provider and device of the network controller and click Search:

  

  You can see that this device is very probably an Intel wireless device:

  

  This jives with This HP said about your system:

  

  If your wireless device is a part of Intel and Intel has a driver download page which has a driver update utility you can download (maybe on your desktop) and let it scan your system and see if it suggests a driver for you:

  http://www.Intel.com/content/www/us/en/support/detect.html

  It is generally not a good idea to use Windows Update to hardware device drivers (video, audio, network) because Microsoft does not know what are the best drivers for your system.  Always get material on the www of manufacturers if possible device drivers (if you want your system to work properly).

  If you ever see updates of hardware driver provided by Windows update that I would refuse them, and then hide them if you do not install the wrong drivers accidentally.

  Here you can see where I chose not to install and then hidden Windows updates for an NVIDIA graphics card since I know that they are probably not right and I know I should get only the right NVIDIA from WWW NVIDIA site drivers.

  Here you can see the updates that were offered, but I have not installed the and hid I don't see them yet:

  

• HP 15 d002sl: unknown device after upgrading windows 8.1 for windows 10

  My laptop is a HP 15 d002sl

  I just upgraded Windows 8.1 to Windows 10 and everything went well. Now after installing all the drivers updated, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\HPQ6001\2 & DABA3FF & 0

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Much appreciated!

  Hello

  The wireless button does work? Please try:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  Kind regards.

• SD card read and windows media center after upgrade windows 10 does not work? How can I restore it

  SD card reader and windows media center does not work after upgrade to windows 10 is there a way to restore?

  http://Windows.Microsoft.com/en-AU/Windows-10/upgrade-to-Windows-10-FAQ

  Can I go back to my old operating system?

  Yes, there are a few ways for you to turn the clock back 10 Windows to an earlier version of Windows, etc.

  http://Windows.Microsoft.com/en-AU/Windows/products/Windows-Media-Center/get-it

  The app Windows DVD player is available free for a limited time to people upgrade to Windows 10 Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8 or 8.1 of Windows with Windows Media Center.

  Note: Windows Media Center is not included in Windows 10 and are removed when you upgrade to Windows 10. Once the upgrade is complete, the Windows DVD player will automatically download to your PC.

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.