No black ink but who only want to scan to the computer via usb.
HP Photosmart 2570 all-in-One series, Im out of black ink, but it won't let me scan via the usb port on my computer. Able to print in color. Windows Vista 32-bit. I tried even to put empty cartridge back in, but said then not supported?
Unfortunately, you are going to need to buy little ink and put it into the cartridge slot. The reason is, the printer not truly allow do you to anything until it can detect genunine ink cartridges.
Tags: HP Printers
Similar Questions
-
Ink Advantaje Deskjet 3545: printer does not detect the computer
When I try to scan something, the printer displays a message saying:
"No found computer."
Make sure that the printer software is installed on your computer, and that 'send to the computer' is enabled.
But it is set up correctly, and when I print from the computer via USB, it prints very well.
Update to improve performance of the printer HP Deskjet 3540 series firmware
Then try to run this.
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
After that.
HP Print and Scan Doctor
http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-4/HPPSdr.exe
REO
-
recently purchased Acrobat Pro for Mac, but who also want to put it on a PC. There are several places so I can do this and I can use it on both Mac and PC? I don't think I can ask my boss to spend another $485 so I may have to go with another drive, if I can't use it on multiple systems.
A version bought the current version (Acrobat DC Pro) can be exchanged, so you should be able to run on Windows or Mac. But never both. You can then run it on two machines for your own personal use (do not share).
A subscription version can be installed on two computers. Windows or Mac. For a person.
More complex arrangements are pointing to a need for volume licenses.
-
"I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.
Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673
Try this first and post back to tell how you got.
-
Want 5530: want to scan from the front panel of the printer computer
Hello
I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.
On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...
The PC is turned on, and the connected user.
Printer is connected directly to the PC via USB cable.
PC operating system is Windows 64-bit 10.
Printer is 5530 want all-in-one.
HP Print and Scan Doctor no problem.
I tried with a disabled firewall.
I uninstalled and reinstalled several times (using a new download of HP).
When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).
Test page will print from PC.
Another PC (running Windows 8.1, connected via a network) seems to work.
Any suggestions?
Hello
Thank you for using the HP Forums. You can try this:
Please uninstall and reinstall the software COMPLETE features, follow these steps:
1 uninstall the software from your computer
Try this program to uninstall Microsoft
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
2. download and save the software COMPLETE features (do not install online)
The following resources will help you:
HP printer install wizard for Windows
http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe3. install the FULL feature software "saved".
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
If you are installing via a USB connection, connect the USB cable only when prompted by the software.
Let us know if it works!
-
Dear Sir.
Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.
OS: Win XP Prof
Bluetooth device: Widcomm connected to the desktop computer
Thank you & best regards
Magali U
Hey Ma U,.
Follow the steps in the article.
How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2
-
HP7520 Scan of the computer does not work, but the impression is
I got a HP 7520 for awhile now, and I used to be able to scan to the computer without any problem. However, after the upgrade a computer to WIndows 8 and re - install the HP software, that no longer works. I left the office as a desktop Windows 7, but have the same problem - again, printing but wireless "computer scan" is not "work and my computers both say a scanner is not installed." Ive tried several ways to install scanner drivers, but no dice. Should this quite expensive multifunctional device now go on the pile of junk? If so I'm passing to Epson - I had enough problems with the HP hardware!
I finally understood that - why it should be so hard to find, I don't know, but thank you for having me on the right path BH - even though she wasn't quite specific instructions for my computer.
I have Windows 7 and Windows 8 machines, but it was the same resolution for both:
Installation of a network scanner
Click here to open the. network
Locate the scanner, right-click and then click on install.
Follow the instructions to finish adding the scanner
A very simple solution, but it is not easy to find, or intuitive to navigate. In any case, my rear multifunction device works again, thank God!
-
want to upgrade 2 computers with xp pro and a netbook with W7 W7 starter without purchase of individual license for each that are all household use
original title: the upgrade of several computers in the HouseThe Windows 7 Home Premium Upgrade Family Pack allows you to install Windows 7 on three computers in the House, but it is currently not available.
Windows 7 Home Premium Family Pack upgrade:
http://www.microsoftstore.com/store/msstore/en_US/PD/ProductID.220510400As the Family Pack is not available - upgrade of three computers, you will need to buy three separate licenses. You can buy two Windows 7 upgrades for computers XP and an Express Upgrade for Windows 7 Starter computer.
You can buy Windows 7 Upgrade here:
http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700
Express Upgrade purchase
Type of upgrade Express in the box files and research programs in the start menu and click the Windows Anytime Upgrade. From there, you can buy an Express to Windows 7 Home Premium/Professional/ultimate upgrade. Then you can enter your Express Upgrade product key and perform a simple upgrade from Windows 7 Home Premium/Professional/ultimate. Online Anytime Upgrade is not available in all countries. All programs and files will remain on the computer, there is no drive necessary and it takes about 10 minutes.
http://Windows.Microsoft.com/en-us/Windows7/products/Windows-Anytime-Upgrade
-
I run 10.7.5 and want to update my browser safari only, do not go to Capitan. Find a Mountain Lion or Yosemite upgrade in the apple website? I watched for an hour? And Yes, I know I should have kept with upgrade... but don't want to go to Capitan, as my book air is very low.
Mountain Lion can be purchased on the Apple Online Store. If you have already not Mavericks or Yosemite from the Mac App Store, go into a physical Apple store and ask the version you want.
It is not possible to update Safari past 6.1.6 on Lion and 6.2.8 on Mountain Lion.
(139064)
-
-With the help of HP Photosmart B110
-Use of Tower/Desktop computer running Windows 7 64 bit
Printer/Scanner connected via WiFi to router
-Printer part works, I can print to this device
-Scanner is accessible via the device Web page.
I want the software of the scanner Solutions Center.
I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.
How can I install the scanner software (or all of the Solutions Center software)?
Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.
HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.
Thank you
Hi @jedi11csa,
Thank you very much to get back again.
I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.
Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.
I hope that you are able to find the solution you need.
Thank you.
-
Why can I I not scan a picture to my computer when I'm out of ink in one of my cartridges? I don't want to print only scan to my computer and the error message allow me to analyze.
Hello Lorenna.
If an ink tank is empty, please press and hold the STOP button for about 5-7 seconds. This will temporarily disable the warning of empty ink and allow to perform the analysis.
It has not responded to your question or problem? Find more help at the Contact Us.
-
I have Adobe CS3, DVD and Cert, but I can not disable the old license that the computer is dead. I would like to re - use again on a newer PC. I asked Adobe in the phone and chat and says that I need to fix this on the forum ONLY.
???
Unless it is a volume license, cat help should be able to reset your activation. If you contact Adobe technical support via chat and ask to reset your activations, then you can go back to have two available if you think you would like the opportunity to install again a backup facility.
A single user license allows you to have the software installed and enabled on both machines, so unless you have already activated with two machines, you still have available activation. So without taking any other action, you should be able to install and activate on the new computer.
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
If this results in volume licensing
----------------http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html
Volume License Activation number: https://forums.adobe.com/thread/1526938
-
"Unidentified network".
Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanksGo to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.
Do not put a check in the box: remove the software driver for this device.
Restart your computer and Windows will install your wireless network.
If the problem persists, see if your computer manufacturer has an updated driver.
These articles may help:
-
SP1 for Vista is installed but doesn't show is not in the computer properties
Reinstalled Vista professional to replace the update to Windows 8 Pro incompatibility with my hardware. Update SP1 installed successfully several times, but always not shown in 'The computer properties' SP1! By thus impossible to reinstall Norton Security because there are installed SP1.
From Internet Explorer
Original title: SP1 for Vista Business
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
He will tell you he which SP you have installed. so, it is not installed.
Choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
-
Want 4520: Cancelled the subscription to instant ink but printer still wants to connect to it
I cancelled my instant subscription of ink. I also decided to use my printer with a cable.
Whenever I try to print something now, the software wants to connect so I can use the instant service of ink. I can only print when you click several dialog boxes.
I want to just a regular old printer connected to my laptop via a cable. How do I convince them what to do?
Thank you for your help,
Sabia
Hi @Sabia,
I recommend instant contact of ink with 1-855-785-2777. They will be able to provide with support in real-time to rectify everything explain related issues.
If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.
I hope this helps. Have a great day.
Maybe you are looking for
-
HTML 5 will not play videos (like the vine)
Some HTML5 videos won't play in my Firefox browser. This vine for example (https://vine.co/v/b3v5h3Piwt7) appears as a static image. I can click the button mute / sound good, but it won't play. When I look at the console when I load the page then 2 j
-
Satellite A300D-11 what processors are compatible?
Hello I am currently on a Toshiba Satellite A300D 11s with an AMD Athlon TK 57 1900 Mhz CPU.Please tell me what processors are compatible with this laptop motherboard, and what would be the best option of upgrade? (performance and heat wise managemen
-
Color LaserjetPro 200 M276nw MFP
The system is Win 7 Ultimate 64-bit Service pack 1 latest updates applied. Giving software package installed for the MFP and firmware updated to update to the latest version. The device is unable to scan to pc, I ran HP print and scan doctor and the
-
pressing the key "w" lance programs that I don't want to open.
Whenever I hit the "w" key on my keyboard, it opens the programs that I don't want to not open. ITunes, internet explore etc. open up and stop what ever I am working. It is a real headache when I work on word documents. How can I stop this?
-
Bills of the AP - query gives output in the editor, but no data found when run from a workflow
HelloI am working on a custom workflow related to invoices from the AP and I came across this very odd situation where the below query works perfectly well by operating in any PL/SQL as Toad/SQL Developer editor but when run in an Oracle Workflow cus