No connection to ssl VPN
Hi all
I have an asa 5510, on which I have configured a clientless ssl vpn.
But when I try to connect to https://ip address , I get an error "connection timed out".
I have attached the config, if someone has an idea, please let me know.
Thank you
Bert
Hi Bert,.
It seems that your ISP may be blocking HTTPS (port 443 TCP) entering.
Check with the service provider, if that is the case, or try this:
conf t
WebVPN
no activation outside
port 4443
allow outside
Then, try to connect to https://your-asa:4443 /
HTH
Herbert
Tags: Cisco Security
Similar Questions
-
SSL - VPN can not connect - Windows 10
Hello
Our office has a SonicWall TZ105, with a more recent firmware, and now with Windows 10, we are unable to connect via SSL - VPN. The user name and password are correct, and I can connect with the Android app. But in Windows 10, I tried the MobileConnect App, the more recent mysonicwall NetExtender, used the terminal to create the VPN connection and just manually made a VPN connection and nothing works.
The President of our company just got a new laptop and there 10 Windows, and I'm hitting a wall in the world, but need to get its connected to our office.
Other VPN connections to other VPN servers work on this laptop, but not at our office. He used to work with the same settings of router on Windows 7.
Each different method of connection attempt is to give a different error. The more strange to me, it's "the specified port is already open." But there is no other connection to that port, and I am still able to connect using my phone.
Any ideas? Thanks in advance!
I was able to solve the problem using the NetExtender 7.0.203, version downloaded from mysonicwall.com. It was the only version (back to 5.0.?) that has been successfully can connect to our TZ105 with a laptop Win10 with all updates.
I hope this helps someone else, I was pretty nearly pulling my hair out...
-
ACL rule does not work after the SSL VPN connection
Hello
I have the following configuration:
-VLAN LAN (192.168.5.0/24)
-VLAN WLAN (192.168.20.0/24)
-SSL VPN VLAN (192.168.200.0/24)
Default policy denies access to the local network. If the value rule ACL to allow traffic between WLAN and LAN. Works very well.
Now I connect with AnyConnect and access resources on the network VLAN. Works.
After you have disconnected the VPN I can't access the LAN to WLAN VLAN. If I disable the ACL rule and turn it back on, it works again until someone connects with SSL VPN.
I use firmware 1.2.15. Any ideas when this bug fixed?
Kind regards
Simon
HI Simon,.
This bug will be fixed in 1.2.16.
I don't know the exact date for the release.
But it should be out soon. If you need the fix sooner,
Please open a case of pension.
Kind regards
Wei
-
RVL200 firmware 1.1.12.1 - Windows 7 still does not work for SSL VPN
Try to connect RVL200 SSL VPN using Windows 7, IE 8.
After update to firmware 1.1.12.1, I am able to install the webcachecleaner, but when I tried to click on the padlock on the screen, I get
"Error: Virtual Passage not installed." Please install as Administrator".
I'm already the only administrator on the computer, and I installed the C++ 2005 Redistributable Package (x 64) according to the accompanying note. Date shows the add-on XTunnel IE 3 March 2010. The certificate is updated (expires 2011).
Any ideas how to get around this problem?
Thank you. Christina
On Windows 7 or Vista, Internet Explorer does not always run with administrator privileges. You must select the "Run As Administrator" option when you start the IEv8.
-
Cisco ASA to make use of several CAs SSL VPN
Hello
I was wondering if it would be possible to set up authentication for different users who connect over ssl vpn based on the SAA for different certificate? An example would be the following:
User A user of authority A certificate would (for non admin)
User B would make use of certiifcate authority B (for administrators)
I don't know that it is possible using a single certification authority; However not too course of multiple CA for the different vpn users.
Thank you.
Hi CSCO10675262
Yes, this should be no problem. Simply create a for each CA trustpoint.
HTH
Herbert
-
Hey guys,.
I'm working on a solution. I have a Home Office with my data center being there while my DR site is my plant and she nearly 20 users. I have a third place, which is a branch offices with only 2 people.
I intend to deploy a VPN Site to Site between the data center and DR Site while branches can connect via SSL VPN. Please confirm whether this solution is viable or not. Where do I go to a Site for the office too.
Thank you
If we knew more about your environment so we might be able to give more complete answers. But base on what you've described, I believe that a VPN site-to site between the data center and the disaster recovery site and VPN for remote access of the branch is an appropriate solution.
HTH
Rick
-
connection SSL VPN in Windows VISTA
Hello
I have a VPN concentrator software Version 3020 4.7.2.D.
I made connections to ssl, but when I try to establish a connection by windows vista it didn't? t make and send a message "the instaler was unable to start Cisco VPN SSL Client"
The vpn concentrator was missing other requirements?
Thank you
SVC is not compatible or supported on Windows Vista with the browser Internet Explorer 7 from now.
The solution is to use supported platforms such as Windows XP with Internet Explorer 7.
-
Hello
I'm deploying an SSL VPN in ASA 8.0, I have access to the public interface and authentication configured radius.
I have the debug RADIUS in asa and I see authentication is OK, I also checked Ray asa and works for the authentication test button, but
It does work for approval.
I've already set up a local user to the radius server.
Thanks for your help.
Best regards
Fran
You may be hitting a license limit if a few sessions have not stopped correctly and that you have only the default value of 2 licenses SSL... Do 'show worm' to see how much you have licenses webvpn. Also try "vpn-sessiondb disconnection of all" to delete all existing connections.
-heather
-
SSL vpn through the same internet connection to another site
Hi, I have a network with a box of Juniper SSL that connect to port DMZ ASA5510, wher outside the ASA is the same outside the box of SSL vpn.
To access issues eno hav network internal at all.
Now, I need VPN SSL Juniper box remote users and internal conenct o my remote sites, who take the client connection through an internet router (Cisco throug site to site vpn IPSec) again to the th eremote site.
Is it possible, my hunch is Yes "can be done."
Currently, I'm fitting get no where, I get no hits ASA DMZ ACL if I try to access the remote site of the SSL vpn client resources.
Schema attached
Any help would be appreciated
Shouldn't be a problem.
On the Juniper SSL, you must check if the roads has been added to the remote IPSec LAN point to the ip address DMZ ASA instead of pointing to the internet through the Juniper SSL box.
You need to configure NAT exemption on the ASA box between the pool SSL subnet to the Remote LAN of IPSec. As a result, you must also include the SSL subnet to Remote LAN subnets in the crypto ACL and mirror image ACL on the remote site ACL Cryptography.
Hope that helps.
-
SSL VPN 25 user license - impossible to get more than 2 SSL VPN connections
Hello
I just installed a user license user Premium 25 for SSL VPN on my Cisco ASA5505. Even though it states that the license is installed I get still only two client Anyconnect SSL VPN connections and the third fails systematically. What Miss me?
Thanks for posting to the forum and that the problem has been resolved, and what caused the problem and what has been done to solve the problem. It's the most useful forum when people can read on a problem and can also read what the problem turned out to be and what was done to solve the problem, I think that it is also a good example to remind us that sometimes, the problem is not in our configuration, or even in the area that we administer. So sometimes we have to look beyond our normal home to find the source of the problem.
The question mark it resolved makes it even more obvious to readers that they will find a solution to the problem. So thank you to mark the issue as resolved.
HTH
Rick
-
Unable to connect to the internal network of SSL VPN
Setting the time first ASA 5512 and I did a lot of research to solve my problem but no luck. I really appreciate if I can get help.
After having successfully connected to ASA via SSL VPN. I am only able to ping to the outside interface (10.2.11.4).
Please check my config and I would like to know what the problem is. Thank you
: Saved
:
ASA 9.1 Version 2
!
hostname asa-01
domain corporate.local
activate t8tpEme73dn9e0.9 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
t8tpEme73dn9e0.9 encrypted passwd
names of
sslvpn-ip-pool 10.255.255.1 mask - 255.255.255.0 IP local pool 10.255.255.100
!
interface GigabitEthernet0/0
nameif outside
security-level 50
IP 10.2.11.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 10.2.255.18 255.255.255.248
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 0
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
clock timezone STD - 7
clock to summer time recurring MDT
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
Server name 10.2.9.23
10.2.1.1 server name
Server name 10.2.9.24
domain corporate.local
network of Trusted subject
10.2.0.0 subnet 255.255.0.0
the object to the outside network
10.2.11.0 subnet 255.255.255.0
network ss object
10.2.11.0 subnet 255.255.255.0
network of the VPNlocalIP object
10.255.255.0 subnet 255.255.255.0
the object of the LAN network
10.2.9.0 subnet 255.255.255.0
network of the VPN-INSIDE object
subnet 10.2.255.16 255.255.255.248
tcp4433 tcp service object-group
port-object eq 4433
standard access list permits 10.2.255.16 SPLIT-TUNNEL 255.255.255.248
standard access list permits 10.2.11.0 SPLIT-TUNNEL 255.255.255.0
host of access TUNNEL of SPLIT standard allowed 10.2.9.0 list
global_access list extended access allowed object VPNlocalIP object LAN ip
global_access list extended access permitted ip LAN VPNlocalIP object
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.2.8.8
Debugging trace record
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 713.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Static NAT to destination for LAN LAN static VPNlocalIP VPNlocalIP source (indoor, outdoor)
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 10.2.11.1 1
Route inside 10.2.0.0 255.255.0.0 10.2.255.17 1
Route inside 10.255.255.0 255.255.255.0 10.2.255.17 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
CA-Kerberos kerberos protocol AAA-server
CA-Kerberos (inside) host 10.2.9.24 AAA-server
Corp.PRI Kerberos realm
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
http server enable 4431
http 192.168.1.0 255.255.255.0 management
http 10.2.0.0 255.255.0.0 outside
redirect http inside 80
redirect http outside 80
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs 4151
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint2
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint3
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint4
Terminal registration
name of the object CN = vpn.corp.com
ASA_PKC_One key pair
Configure CRL
trustpool crypto ca policyIKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Telnet timeout 15
SSH 10.2.0.0 255.255.0.0 inside
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
outside access management
management of 192.168.1.2 - dhcpd addresses 192.168.1.10
enable dhcpd management
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 10.2.9.23 source outdoors
SSL cipher aes128-sha1-3des-sha1
management of SSL trust-point ASDM_TrustPoint4
SSL-trust outside ASDM_TrustPoint4 point
SSL-trust ASDM_TrustPoint4 inside point
WebVPN
allow outside
No anyconnect essentials
AnyConnect image disk0:/anyconnect-win-3.1.04063-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
list of chip-tunnel TerminalServer mstsc.exe Terminal windows platform
attributes of Group Policy DfltGrpPolicy
value of server DNS 10.2.9.23
L2TP ipsec VPN-tunnel-Protocol ikev1
field default value corp.com
WebVPN
value of customization DfltCustomization
internal group CA-SSLVPN-TEST strategy
attributes of CA-SSLVPN-TEST-group policy
WINS server no
value of server DNS 10.2.9.23
client ssl-VPN-tunnel-Protocol
field default value corp.com
internal group CA-CLIENTLESS-TEST strategy
attributes of group CA-CLIENTLESS-TEST policy
clientless ssl VPN tunnel-Protocol
WebVPN
value of URL-list of the contractors list
chip-tunnel enable TerminalServer
ssluser nS2GfPhvrmh.I/qL encrypted password username
username ssluser attributes
Group-VPN-CA-SSLVPN-TEST strategy
client ssl-VPN-tunnel-Protocol
group-lock AnySSLVPN-TEST value
type of remote access service
username admin privilege 15 encrypted password f4JufzEgsqDt05cH
cluser 3mAXWbcK2ZdaFXHb encrypted password username
cluser attributes username
Group-VPN-CA-CLIENTLESS-TEST strategy
clientless ssl VPN tunnel-Protocol
value of locking group OLY-Clientless
type of remote access service
attributes global-tunnel-group DefaultRAGroup
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultRAGroup webvpn-attributes
CA-ClientLess-portal customization
attributes global-tunnel-group DefaultWEBVPNGroup
sslvpn-pool ip address pool
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultWEBVPNGroup webvpn-attributes
CA-ClientLess-portal customization
remote access to tunnel-group AnySSLVPN-TEST type
tunnel-group AnySSLVPN-TEST general attributes
sslvpn-pool ip address pool
CA-group-Kerberos authentication server
CA-SSLVPN-TEST of the policy by default-group
tunnel-group AnySSLVPN-TEST webvpn-attributes
OLY-portal customization
Disable Group-alias AnySSLVPN-TEST
Disable AnySSLVPN-TEST-group-alias aliases
OLY-SSLVPN disable group-alias
enable SSLVPN group-alias
type tunnel-group OLY-Clientless Remote access
OLY-Clientless General attributes tunnel-group
CA-group-Kerberos authentication server
Group Policy - by default-CA-CLIENTLESS-TEST
OLY-Clientless webvpn-attributes tunnel-group
CA-ClientLess-portal customization
try to master timeout NBNS-server 10.2.9.23 2 2
Group-alias Clientless enable
Group-aka cl disable!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
class class by default
Statistical accounting of user
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group 3 monthly periodic inventory
Subscribe to alert-group configuration periodic monthly 3
daily periodic subscribe to alert-group telemetry
Cryptochecksum:ceea6b06a18781a23e6b5dde6b591704
: end
ASDM image disk0: / asdm - 713.bin
don't allow no asdm historyHello
I'm glad to hear it works
Please do not forget to mark a reply as the right answer or useful answers to rate
-Jouni
-
Unable to connect to the site Web SSL VPN with firewall zone configured
I recently updated my 2911 company and set up a firewall area. This is my first experience with this and I used Cisco Configuration Professional to build the configuration of the firewall first and then edited the names to make it readable by humans. The only problem I can't solve is to learn site Web SSL VPN from outside. I can navigate the website and connect without problem from the inside, and even if it was useful to verify that the Routing and the site work properly it is really not what I. I don't get anything on the syslog for drops because of the firewall server, or for any other reason but packet capture show that no response is received when you try to navigate to the outside Web site. I am currently using a customer VPN IPSEC solution until I can get this to work and have no problem with it. I have attached a sanitized with the included relevant lines configuration (deleted ~ 400 lines including logging, many inspections on the movement of the area to the area and the ipsec vpn, which I already mentioned). I searched anything about this problem and no one has no problem connecting to their Web site, just to get other features to work correctly. All thoughts are welcome.
See the security box
area to area
Members of Interfaces:
GigabitEthernet0/0.15
GigabitEthernet0/0.30
GigabitEthernet0/0.35
GigabitEthernet0/0.45
area outside zone
Members of Interfaces:
GigabitEthernet0/1
sslvpn area area
Members of Interfaces:
Virtual-Template1
SSLVPN-VIF0
I tried to change the composition of the area on the interface virtual-Template1 to the outside the area nothing helps.
See the pair area security
Name of the pair area SSLVPN - AUX-in
Source-Zone sslvpn-area-zone of Destination in the area
Service-SSLVPN-AUX-IN-POLICY
Name of the pair area IN SSLVPN
Source-Zone in the Destination zone sslvpn-zone
service-policy IN SSLVPN-POLICY
Name of the pair area SELF SSLVPN
Source-Zone sslvpn-area free-zone Destination schedule
Service-SELF-to-SSLVPN-POLICY
Zone-pair name IN-> AUTO
Source-Zone in the Destination zone auto
Service-IN-to-SELF-POLICY policy
Name of the pair IN-> IN box
In the Destination area source-Zone in the area
service-policy IN IN-POLICY
Zone-pair name SELF-> OUT
Source-Zone auto zone of Destination outside the area
Service-SELF-AUX-OUT-POLICY
Name of the pair OUT zone-> AUTO
Source-Zone out-area Destination-area auto
Service-OUT-to-SELF-POLICY
Zone-pair name IN-> OUT
Source-Zone in the Destination area outside zone
service-strategy ALLOW-ALL
The pair OUT zone name-> IN
Source-out-zone-time zone time Zone of Destination in the area
Service-OUT-to-IN-POLICY
Name of the pair area SSLVPN-to-SELF
Source-Zone-Zone of sslvpn-area auto
Service-SSLVPN-FOR-SELF-POLICY
I also tried to add a pair of area for the outside zone sslvpn-zone passing all traffic and it doesn't change anything.
The area of networks
G0/0.15
172.16.0.1 26
G0/0.30
172.16.0.65/26
G0/0.35
172.16.0.129/25
G0/0.45
172.18.0.1 28
Pool of SSL VPN
172.20.0.1 - 172.20.0.14
Latest Version of IOS:
Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M10, RELEASE SOFTWARE (fc1)
Glad works now. Weird question, no doubt.
I guess that on the deployment guide said that the firewall will not support inspection of TCP to the free zone, however, class nested maps are used to accomplish this, to be completely honest, I think it's a mess and the best thing to do is action past to auto for the protocols that you want and then drop the rest.
Let us know if you have any other problems.
Mike
-
SSL VPN, is possible for the failing show the "untrusted site" warning when connecting
SSL VPN, is possible for the not display the warning "untrusted site" when connecting. I trust 3rd cert left installed on the SAA. Is it possible, when I connect to it via the Web for the not give users the below page and just go to the connection. If they hit to continue it works but we are looking for a way to remove this error.
There is a problem with this Web site's secure certificate.
The security certificate presented by this website was not issued by an approved certification authority.
A site address different Web issued the security certificate presented by this website.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not make this Web site.
Click here to close this webpage.
Continue to this website (not recommended).
More information
Hi Jason,
Follow these steps:
1-no ssl trustpoint outside ssl.axisbu.com.trustpoint
2 - webvpn
no activation outside
output
3 - ssl trustpoint outside ASDM_TrustPoint3
4 - webpvn
allow outside
It seems that he does not have the right certificate, probably the self-signed is stuck, please follow the steps and let me know.
Thank you.
Portu.
-
CSCun53913 ISA500: SSL VPN stops accepting connections.
Since the beginning when put into production ISA570 had this problem (SSL VPN stops and the solution is to reboot the device) used 3 new firmwares and none of them has solved this problem.
I don't understand the company like CISCO not solving this problem in an acceptable time.
When I bought the ISA570, the cisco to the Portugal told me it was ideal solution to use SSL VPN AnyConnect, omitted this question.And now, I request this is a serious company?
Who is responsible?Thank you
JL
I have the same problem.
But I do not restart the unit. I changed the service (such as 444) ssl port, I stop the service; I starts the service and in replace port 443.
A few days later, the problem is back.
Thanks for solving the problem.
-
Hello
I want to configure SSL VPN for mobile users on ASA 5510 I have following requirements
> What are the condition of licence on ASA 5510 VPN with Anyconnect SSL?
> VPN users have full access to the local network via ASA
> Authentication method preferred, Local or AD (LDAP)
> users use not laptops should be limited to the Clientless SSL VPN
> How to add a URL is visible to users in the Web page
> Can someone view example configuration for the above requirements
TIA
Hitesh Vinzoda
> If you need both AnyConnect and WebVPN (Clientless SSL VPN), you can buy the AnyConnect Premium license (and this is a base user license). The ASA would come with default 2 SSL VPN license.
> To have full access to the local network, you must use AnyConnect SSL VPN. Here is an example of configuration:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808efbd2.shtml
> You can authenticate to AD or Local or RADIUS, etc. By default, this would be local authentication.
> Here's some example configuration for clientless SSL VPN:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008072462a.shtml
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00806ea271.shtml
Hope that helps.
Maybe you are looking for
-
Apple pay, does not refresh even the iTunes card will update more. Is there a solution? Thank you.
-
Firfox crashing when you run a game with original by Tridef 3d application
I have a LG D2342 screen. This screen has 3d Support. I play Battlefield 3. The 3d is running through an application called Tridef 3d. When I start the game with the Tridef he begins to open Firefox, then the firefox would just stop responding and ha
-
Hello I have to import the VHDL code in Labview. I would like to know what the best solution what CLIP, integration IP node or node on HDL from the previous version of Labview if it is possible to use it. Thank you
-
Windows update error: 80073712
I can not install an update security and downloaded manually but get the same error 80073712. I'm free from virus, but a recent System File Checker finds corrupted files that it was unable to fix, so I thought that maybe that's why it not install the
-
I'm trying to connect my Sony camcorder to my Compac computer using GrabbeeX deluxe device connected to a usb port and windowsVista, but a continuous alert that says "Please upgrade your version of WIN - 2 K to Service Pack 4" can you please advise a