No data. Like, no.

Similar Questions

• Bij het openen van mijn photoshop elements 8 via het bureaublad squeeze ik of fusion: doing 6 en zou ik computer opnieuw opstarten maar dat like closer ook niet.

  Bij het openen van mijn photoshop elements 8 via het bureaublad squeeze ik of fusion: doing 6 en zou ik computer opnieuw opstarten maar dat like closer ook niet. Wie kan mij helpen?

  HEB wel een laptop PS6 weniger gedownload die Super first nog wel maar nu ook niet meer.

  If this is the exit code 6, photoshop elements: http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

• IK heb een all time en ik zou dat like willen even laten zien. Het all is greenscreen highlights Los Alpha channel. IK heb zelf niet die kennis die ik wel surroundings zou willen.

  Like zou ik vallende stukjes puts een foto ITU unique zien vallen. Hoe kan ik says doen of principled jullie een adres waar ze dat voor mij van hotel doen?

  IK als png executives first thought you bewaren en dan in photoshop by frame says you maskeren, maar Grosszugiges is er een veeeeuuul makkelijkere handle. I HOPE ;-)

  Zie:
  https://Vimeo.com/152961788

  code 1234

  Sometimes the automatic translation does not a good job.

  I hope I have I understand what you're saying.

  It seems to me that you say you want to get an idea to break out rather than just a shocking white wall. You can't do if you don't have that is the video you show on Vimeo. You must make the overwhelming photo beyond what application was used to create the pieces fall.

  Or you need a UV 3d software rendering pass and one of these tools:

  Youveelizer | Maltaannon.com

  RE: Vision Effects, Inc.: products: RE: map

• parts of XML in hierarchical data (like a tree)

  Hi all

  I have a potential, big enough XML file, I need to present only parts in a tree structure. The XML is something like:

  < scenes >

  < scene id = "1" label = "label" >

  < actors >

                 ... stuff ...

  < / actors >

  < snapshots >

  < instant label = "label" >

  ... content of the node.

  < / snapshot >

  < instant label = 'other label' >

  ... content of the node.

  < / snapshot >

  ... maybe more instant...

  < / snapshots >

  < / scene >

  < label scene = 'a' >

  < actors >

  ... stuff...

  < / actors >

  < snapshots >

  < instant label = "label" >

  ... content of the node.

  < / snapshot >

  < instant label = 'other label' >

  ... content of the node.

  < / snapshot >

  ... maybe more instant...

  < / snapshots >

  < / scene >

  ... more scenes...

  < / scenes >

  I would like to have a tree-like representation of it so that only the labels 'scene' and the 'snapshot' labels are displayed.

  I can't figure out how to ignore all subnodes without actually creating a copy of the XML file and the exhibitionist somehow. That I prefer not to do, because the link between the actual data and its visualization (tree) has more or less disappeared.

  Suppose I am a little confused by all the possibilities... Maybe I can use a stripped XML but link selections or changes (node labels should be possible to be renamed and reorganized) the original data?

  Can someone point me in a right direction?

  Thanks in advance.

  Manno

  See ITreeDataDescriptor

• How is data (like PF_world) sequence_data framework?

  Hello world

  I'm a newbie trying to write my first AE plugin effect, porting the existing stand-alone C++ code.

  now I import a video to a layer, I just want to know how can I get data every frame of this video, as the format of PF_world?

  And I feel so confused that we operate fits with the structure PF_world, so when we use frame_data member of PF_INDATA? And so much frame_data than sequence_data defined as PF_Handle, how can I accsee the corresponding region of memory?

  Thank you all for your time.

  Let's go back to the basics:

  There are two types of effects in AE:

  1 effects - that are applied to layers and process/generate the image and

  audio.

  2 AEGPs - which are General and add features to the AE in many ways.

  and add commands to menus of EI.

  you talk about an effect.

  on the technical side, we must separate two types of effects. those who use

  smartFX and those who did not.

  smartFX is an API created to improve the overall rendering performance of EI, and

  allow plugins to support floating point color.

  as Prime Minister does not support smartFX, it is usually as plug-ins that

  require a multiple host support that do not implement smartFX.

  why we make this distinction?

  because two different effects ask pixels of the layer in different ways.

  now, for the pixels of a layer effects may ask at any time to its source, and

  they can do it well. What do I mean by "soft"? I mean, the effect can

  AE tell in advance that a framework needs to be cached. Thus, when asked, AE

  didn't need the re - make.

  non-samrtFX effects automatically pass the effect input image

  params [0]-> u.ld.

  for entries for layer params or from other times of the source, these effects of using

  PF_CHECKOUT_PARAM(), where you can specify the time source you wish to

  Download.

  smartFX effect use checkout_layer_pixels(), which again, you can

  Specify the time of the source.

  two types of effects must have the PF_OutFlag_WIDE_TIME_INPUT flag set, or

  strange errors happen when you ask many times from different source...

  effects can also request images in a not-so-nice way...

  in this way is not nice, because it does not give a 'heads up' AE, so AE cannot

  decisions of caching in advance that would help.

  However, this method you can order the pixels of a project item

  a any time source.

  to do this, look in AEGP_GetReceiptWorld()

  with respect to the data on the sequences, it is indeed a PF_Handle, but you must cast which

  handle using this structure you want. Since you know the structure

  you use, that shouldn't be a problem.

• Why can't I set a data like 554 GB store?

  I WISH I could get a store of data that is more than 554 GB!  I have a Dell 2950 with 4.5 to set on a RAID 5 disk array configuration - and I try to define a store of data every time I am only 554 GB.  I realize, I might have to break my RAID 5 array into partitions of 2 TB drives, but I can not even past the 554 GB.  That's all it define me.  I can't increase the space at all and i/o control is not enabled for my hardware.

  Anyone encountered this?

  Hello.

  2 TB - 512 bytes is the maximum size, as described in KB 3371739.  Resize your volumes to be smaller than this size, and you should be set.

  Good luck!

• How can I import all the data of rockmelt Firefox which I like more, but I can't find a data option rockmelt 2 2 firefox as import switch and insert bookmarks in firefox?

  I want to import data like passwords and histroy and bookmarks and all of rockmelt Firefox I tried to go to import from other browsers, but I found no rockmelt, and also it will not contain password and this thing so please if you can tell me what is the best way to do this thing I need this quick please.

  To all of you who have this problem I solved it with myself.

  Just go to google chrome and download it and then go to C:\Users\username\AppData\Local\RockMelt and then copy all the data from the user file and then go to C:\Users\TOSHIBA\AppData\Local\Google\Chrome and delete the data of the user of the file and paste the one you copied everythign now in base is in chrome then forefox do synchronize on the other browser then choose google chrome!

  Note! If you can't find the AppData file it's hidden setting of files and folders and check the box says show all hidden files.

  Good luck!

• 2d line, numbers and dates. How to take into account the date value when drawing a 2d line?

  Hello. I just encountered a problem when tracing a line 2d with numbers.

  I have the following table:

  Date	Total
  2015 12-31	R $150 000,00
  2016 03-19	R $159 000,00
  2016-03-25	R$ 166,090.00
  2016-04-01	R$ 159,250.90
  2016 04-10	R$ 165,343.41

  But when I create a 2d line chart it does take into account the fact that the 1st line is in December. Numbers do not fit the distance between the data symbols according to the date, but instead just consider the dates like any other label. Which causes the curve final not not to be specific

  

  Is it possible to make account numbers of dates when tracing of graphics?

  If you don't want the dates to be spaced when you do not have uniform intervals so you can use a cloud of points in 2D instead of a 2D line and turn on the connection line, something like this:

  

  Note that with the Scatter 2D (unlike with 2D line) you do not want to be defined as a column header in the left column.

  SG

• How to manually backup and restore iphone content (texts, contacts, data apps) and apps?

  How to manually backup and restore iphone content (texts, contacts, data apps) and apps?

  What do you mean by "back up manually? Do you mean back up some data like contacts, texts selectively?

  Or you don't want the automatic upward, instead, you want to manually create upward?

• Changes dates on photographs in the manner of return

  Hello

  I scanned in a lot of older photos and I'm subject to heart the dates using the Date and time setting.

  Before I go ahead, I want to check if there is no limit on the dates, that you can change. I'm old enough to remember the worries about the Millennium bug (I appreciate did not affect Mac computers in any case). Some of my family photos date back to the 1930s, but computers and devices digital photo seems often default dates like 1984 and 2004, while I was trying to reassure that the old dates picking corrupt photo library.

  I did not no mention of this in the Apple manuals or in my research on support, but would like to hear from anyone who has changed the dates on the older photos.

  Thank you

  According to me, there is but I don't remember, or don't have I seen it documented - you have to experiment

  and I don't see how knowing that Exchange in any case - it is what it is and the photos that they are what they are, and knowing the limit won't change anything unless you saving time soe experiment

  LN

• creating recovery OS disc will erase the other data on external hard drive?

  -seagate external hard drive to create the operating system recovery disc.

  n ' has no partition, thought it would appear on disc ext with the rest of the files and data (like the time machine)

  -cannot access now, is no longer in the finder or on the desktop, in disk utility.

  -is deleted the previous data?

  Thank you

  clueless

  Open the finder preferences and if you have selected "external drives".

  

  Ciao.

• Recording of data at low speed

  Hello

  I am acquiring data through data acquisition. The sampling frequency is 20 k and sample read is 2 k. These parameters satisfies my needs. But the data I save are enormous, because I intend to acquire for hours. Therefore, I would be grateful if somone could tell me how to save data to low flow that is without changing the "sampling rate" or "sample to read." In addition, if I could set the frequency of data backup whenever I have start the aqusition.

  Thanks in advance for the help.

  Which makes it look like your data like, is it rapidly fluctuating or is relatively stable with occasional outliers or? I'm asking because the answer may vary in function resembles what data. Simply "decimation" (each sample X gain) may operate for some data, but then you may miss something 'important' Moreover, if the data is relatively constant, with occasional outliers, then by recording a sample every time that data moves to a set point (the new sample is X amount larger or smaller than the last 'set point') and then by setting new value to this value may work for other types.

• timed, reading data

  Hello

  I have a file text filled with data like this

  ...

  Well, everything is fake. Don't do a reading with each iteration. Use the worksheet once playback feature with the delimiter that is listed in the file. Wire the property node correctly. Convert decimal numbers to integers floating are very bad, unless you want to draw all zeros.

  The attached VI displays the entire file at once. If this isn't what you want, it is a simple change. Have you followed the tutorialon basic LabVIEW?

  No idea as to what your idea of 'clean up' is.

• Support for song in last OR-IMAQdx data

  Vision Acquisition software, March 2010 edition, came with a nice novelty. Supported data piece for GigE Vision cameras, point 3.6 IMAQdx. This is a feature I've been waiting for for a while, so I gave it a try with my camera Basler Runner. I put in a few comments/questions:

  • I have found no documentation for the novelty. Is there something there? Document, help file, example?
  • I put the attribute 'Chunk Mode' active through MAX. However, the enum "Segment selector" attribute is empty and enum values are filled after Chunk Mode is turned on and the camera is re - found by MAX. But MAX will not let you save the attribute 'Active Chunk Mode' unless 'Chunk' set to a valid value - it shows the error 'attribute out of reach. " To get out of this circle without end, I had to manually modify the CIM and define 'Chunk Active Mode'. That done, I could now "Segment selector" for example "timestamp" by MAX and thus activate the piece of timestamp.
  • In a loop of image in LabVIEW acquisition, I have read custom data attached to the IMAQ Image from IMAQdx get Image. There are only two keys here, "IMAQdxActualHeight" and "IMAQdxLostPackets". No timestamp. So, I went back to MAX and off "active Chunk Mode. After the re-run of the loop of the acquisition, now the piece of the timestamp was in fact among the custom data - both keys "IMAQdxTimestampHigh" and "IMAQdxTimestampLow". It's a little weird that the song data are available only when the 'active Chunk Mode' is set to OFF. However, the data contained in the keys "IMAQdxTimestampHigh" and "IMAQdxTimestampLow" are perfectly OK, just the timestamps of image that I always wanted to have.
  • Having experienced the weird behavior of the active 'Chunk Mode' attribute, I turned the attribute back and tried to adjust the second new attribute "Chunk Data active decoding". In this case, I had a lot of new keys in the custom data from the image. Among them, also "IMAQdxChunkData_CameraAttributes::ChunkData:ChunkTimestamp". Which seems to be what I needed. In any case, after his conversion to the type U64, this key gives me values that I do not exactly understand. They are somehow related to the current timestamp, but I am not able to decode the relationship.

  To summarize, it looks like the novelty is here and providing results. But a lot of things seems to be not working "as planned", forcing me to use the really nasty workarounds. Or maybe I am doing something wrong. I can't know when there is no documentation.

  So any that would clarify things a bit?

  Hi Vladimir,.

  Sorry you had to find out the hard way that the documentation is a bit 'lack' of this new feature. I hope that this will be fixed in the next version...

  I'll try to explain how things work and answer your questions along the way

  Song data must be implemented and enabled in two places: the camera and the driver.

  How it is activated on the camera picture is (now) very specific seller. Some providers may enable by default, most need to be activated manually. I don't know if I've seen the issue you see with the "Segment selector" function on the camera of Basler. The way it should work is that after activating "Chunk Mode active", would then toggle the "segment selector" through each available value and to enable or disable this feature to be included in the block sends data to the camera. You should not need to directly modify the CIM... If you simply switch the Active Mode to 'true' segment, move the "segment selector" a valid value and then click on save, it does not work?

  After you enable the various components of the song you want in the camera data, you then go to the 'Chunk Data decoding Enabled' attribute of IMAQdx and set it to true. This will cause IMAQdx decode data piece that is present from the camera and put it in the custom data to the image of the Vision. That's what you see when you see all custom data with the key starting with 'IMAQdxChunkData_ '. The name that follows is the name of the song data element (specified in the XML as attributes, so they live in the namespace attribute).

  Now, the two keys to custom data that you were called 'IMAQdxTimestampHigh' and 'IMAQdxTimestampLow' are actually NOT given piece. They are data that is present in the charge of the standard image of a GigE camera. We are actually still those revenues since the first version of IMAQdx with GigE Vision supports. These should match exactly the same values that you will receive if you query the 'IMAQdxChunkData_CameraAttributes::ChunkData:ChunkTimestamp' on a device of Basler. Interestingly, however, you discovered already, when the song sending on the camera data are enabled, these integrated timestamps will disappear. This is because in the version 1.0 x GigE Vision, song data package format specification did not have the same fields in the data that is in charge of the base image. The idea was that, once you have activated the data segment, you need to get all these areas through song data. In the new version of the specification GigE Vision (which is not yet implemented by IMAQdx and maybe not on all cameras still), there is a combined format that allows the use of the song with the standard image information data (like parking meters, height of the image, etc.) without needing them to be sent as song explicit data elements. However, for all purposes, practices, cameras should allow you to activate the exact same fields missing load of the image and present them as a piece of data instead.

  Hope this helps to explain some of the behavior,

  Eric

• move the data by lines into a 2D array

  HI, I have a question about moving the data in a 2D online table, that I was not able to do so if anyone has an answer please let me know

  a picture of what im doing is attached as I said

  I want '1 and run' online no column, if I change the index of the line it will work but the problem is that the 'run' under the '1' and I don't want if I change the index of the column of labview makes the data like the attached picture, but when I changed the labview index moves the data by column when want per row

  Hi, I think that change your code as this will give you the behavior you're looking for.

  

  That being said, your source code is a bit confusing. Why do you have a loop for? If you remove the loop for example, the code will do exactly the same thing.

  Kind regards

• How to make a table with all dates between two dates

  Basically, I need a vi that returns an array with elements containing all individual dates between the two dates. I am trying to build one myself... but obviously if there is already a few vi do that I would use it instead. Anyway, any help is appreciated... I'll just be over here write it too hard to pass the time.

  Just an idea

  Output is the table of dates (like timestamps) between the timestamps 'Start' and 'end '.

  

  Marco