No device for printer

Similar Questions

• MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = not signed?

  Recently, MS windos XP sp3 fails to recognize the common plug & play devices.  Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.

  MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned.  Was the load ok previously.

  This is how I have to upgrade?  I have five computers and two are 98 and 95 for some software.  That line.  TonyR

  The signed data are perhaps crushed or damaged on the HARD drive.

  Hello

  See this Microsoft KB article and check if that helps.

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

  When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.

  Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.

  For more information about driver signing for Windows, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/whdc/devtools/ddk/default.mspx

• "Error-printing" showing on device portable printer box

  "Error-printing" on the box of device portable printer using HP C4780 all-in-one printer wireless with Windows 7 -

  My handset and printer worked well for 2 years and now no possibility to print this message in my inbox printer on the computer device. Œuvres to printer and prints with a test on his own page printer then works. It scans and downloads, so link with laptop wifi works.

  Automatic, troubleshoot finds no problem then tells me "contact the network administrator. I tried the update of the installation software driver and said that I have the latest update.

  Checked the firewall and regarding as can see, everything is approved.

  Ah, also printer is off and the laptop and turned back on!

  Any other suggestions welcome! Thank you

  Would like to say that this has been resolved by reference to the solution posted by error-printing-restart: all to the bottom out of power leads to laptop and main market (while the laptop is turned on), count 15 seconds and reinsert the power leads to decision-making and the printer. Thank you very much!

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

• Lexmark X502n all-in - One Printer work for printing, but not scan

  Hello

  Installing Win7 (64 - bit, Enterprise) driver for these printers worked very well only for printing.

  A driver for the scanner will not be detected and I find an entry in the Device Manager als Scan with the ID of 'USB\VID_043D & PID_0109 & REV_0001 & MI_01' material

  The 'top' company Lexmark :-( Support replied on my survey abou this, that there is no support for this printer, weather by lexmark, or Microsoft. But on their own support page (http://support.lexmark.com/index?page=content&id=os6&locale=EN&userlocale=EN_UK), they offer to use the Windows 7 operating system driver.

  Have someone at - it an idea how to get scanner work?

  Thank you for the Germany

  Georg

  The driver offered to Microsoft by Lexmark is very basic and will allow only for printing so that you can always get the main use of your Lexmark all in one.

  Support ended with XP and there had been no complete driver released for Vista or Windows 7 package and will never be. Lexmark being solely responsible for drivers, if you want to scan functions, you can buy a product that has full Windows 7 support...

• Avoiding Rich black in the files for printing

  Situation: One our vendors with which I work is printed paper, which suggests no black rich in PDF files or files HAVE.

  Problem: Despite a palette limited (in which I use 100% black, white and a range of primary colors), the definition both a Rich Black element seems to find its way files in my working file HAVE (and there PDF for printing). I noticed this happened sometimes when I copy the text (or elements of black color) since another file I and then paste the items into the file, I'm working on that. It seems to happen only a few times. Outside by clicking on each black element - to research on the artboard and it controls in the color window to see only the black is 100% and CMY are all 0%, it is a surefire way to avoid the intense black in every capacity (especially in the fine print)? I saw the appearance of the black panel, but which seems to deal only with the screen devices and output RGB.

  Any help or advice is appreciated! I would like to solve this problem.

  Side-note: I use CC on a Mac.

  Check your files in Acrobat format.

  Use the separations Panel in Illustrator. Disbling the rear channel should give you a clue that is opposed to inspect more

• How can I place several smaller images of varying size on one page for printing without losing the original size.  Board contact option to resize my pictures

  Does anyone know how to place several small pictures on a single page, so I can print them out as a rather print over and over again.  I want to maintain the original size of the images that vary somewhat.  I tried to use the option of the Board-contact, but he seems to want to resize my images which unfortunately is of no use to me.  I tried to cut and paste on a new page, but I don't think that it is now the original size.

  Alternative applications sometimes can provide quick and easy results.

  It might be interesting to download the demo version of Photoline: it includes a simple Board-contact option that allows for images to be included without loss of resolution, i.e. the original is left intact and the proportions remain unchanged. Since Photoline also supports documents several pages, all the thumbnails are collected into rows and columns, the user can control and the end result can be exported as PDF.

  -Download the trial of pl32.com

  -Open Photoline, then open the browser (CTRL/CMD (B)

  -Navigate to your folder with the images you want to combine for printing.

  -right mouse click in the thumbnail view, and then select "Create image Catalog.

  -Select the page by Page size

  -under 'Size' define the number of rows and columns (there are here a translation error: "Spalten (COL) / rows (lines)".)

  -Uncheck "scale photos physically." This ensures that the original images are intact and incorporated in full resolution.

  And then click OK.

  Some of the other testing devices until you get a satisfactory result. Then export it to PDF.

• Best settings for print-to-pdf for news

  Hello, can anyone recommend settings appropriate to use for printing in pdf format of newspaper clippings from a web browser? I archive items of information in PDF format sites, which I then use later for the two reading on PCs and laptops and print devices. Specifically, what standard pdf is better to use in this case? I plead mainly because the text in PDF files that I have done so far is much less smooth and hard to read I thought it would be when viewing on pc even with acrobat 10 smoothing turned on. It makes the right edge of letters seem to be cut off. Mind you, I am interested in the pdf to 86% (adjustment of the height); When I zoom to 100%, the text becomes smooth. And PDF files also seem very clear on my portable devices. My screen is 1920 x 1080.

  See you soon

  If it's a graphic, then a higher resolution would be useful. You should be able to tell if it's a chart zoomed out and checking the pixels. If you capture fonts, then they should look the same at any zoom. You can, of course, that the fonts are included. As a check on some of the questions, try the press or print settings to see if things improve. The other option is to go back and change the settings for a custom, but good form to start with one that look reasonable first - or at least compare some of the settings files. There are other problems of print resolution (the default 1200 dpi value is usually much more you need).

• Scaling of content for printing - panic...

  Hi all

  I tried to adjust my eBook for printing. as a self-taught user and total novice to requirements and printing procedures, I made a fatal mistake to put a lot of my content ouside purple inner margin of the pages. That is to say. they all use the page...

  Here is a screenshot of a corner of one of the pages:

  

  as you can see, the page numbers and the text in the corner is the correction of the page...

  I learn by the printing company I'll be necessary across all the content to fit inside the purple borders, or otherwise add 3 mm bottom lost all my documents. I don't know how do either!

  They said that the recommended size would be 216 mm x 154 mm, but I'm completely lost here and in a panic, my deadline is close.

  any help anyone can give is appreciated... !!!

  Thanks in advance

  best,

  Owen

  Purple margin guides are only guides and it has absolutely nothing sacred about them, nor is there any condition that the content remains inside of them. To content it for your convenience and to control the size of the automatically generated text blocks and many, if not most, documents that they would be well beyond 3 mm from the edge to allow do not blend in with the link and give readers sapce som to contain the page.

  What is important here, that's what you want and wait get in this corner. Your printer tells you that they do not guarantee exactly shaving the edge of the theoretical page (a common warning). Most digital printing devices are not as accurate as a press to get the perfect regisitration page to page, so when a pile is cut some content will be closer and some further from any given edge as you move through the stack. The even pages printed on a press can have a few variations, and if the cutter operator is sloppy or accumulated debris, cutting can be where it is supposed to be. There is also the problem of the unprintable areas on the edges of a sheet which is used to move the paper along or to prevent ink to penetrate beyond the edge and scrub of the device.

  In this case it doesn't seem that the problem is an unprintable, but rather cut exactly on the corner. This means that the possibility exists that part of your corner text or number of page maybe be sliced offshore, or the cup can derive from the other side and let more space than you wanted.

  The page number is pretty easy. Move away from the edge that we practice. The text of the corner is not so easy because it looks like you really want this right in the corner. Bleed will not solve this. Bleeding is when go beyond you the edge of the moulding of the page of the 'work' (which means just any area receiving ink). 3 mm is a pretty standard amount. The purge is intended to prevent a white line showing along the edge after trimming when the ink should extend to the edge. Something beyond the point where the paper is cut is ignored.

  So a bleed of 3 mm will allow for up to 3mm of alignment in the canoe, but if the page is shifted 3 mm in one direction, the opposite edge is also shifted 3mm in the same direction, this amount is prepared outside the edge of designed a page only one side is adorned by far inside the opposite edge. In order to be sure that you don't lose anything important that you must have all the content you care about back of the edge as much as compensation to bleed, and more, it's probably a good idea. Similarly, if you expect a white border, there must be broad enough to withstand the misalignment.

  In the case of your text from corner, large cup of any part of it would be bad, so the only real solution is to modify the design, so none of this is closeer at 3 mm from the edge (and contain page numbers at least 3 mm from the edge, as well). If the units on the leaders in mm RA, it's as if the margins are set to 3mm, then Yes, you would need to move text objects in their guides. Images can be enlarged to extend off the page in 3 mm inisde if you wish, or also moved the guides.

  One of the ways to accomplish this (sliding all inward) would be to place your current pages into a new document to correct size and scale. "' You can do this by using the script you will find at InDesignSecrets" Blog Archive "Zanelli releases MultiPageImporter for importing PDF and INDD files

  Another option is to find a printer who understands that the position of the content area is critical and can print and cut tight tolerance required. This service is likely to cost more.

• Question about preparing files for printing from Photoshop

  I need to understand the best way to save for print from Photoshop. Here are the things that are confusing to me:

  Problem: When I create a design in Photoshop, I find myself with a few options on how to save my document. I would like to know which of the following statements is the best method:

  Method 1: create a PDF, and embed the fonts. This method, which worries me because I read that some fonts will not be open on the end of beneficiaries because of restrictions imposed by the manufacturer of the police. I should be concerned or is embedding fonts the best route to take?

  Method 2: Convert all types of forms. This method seems to be the most secure, but I read problems related to this road as well. A site commented that having too much text converted into forms can cause extremely long print times. Is this true?

  Another problem I encountered with the conversion of text in forms is when I have a paragraph that has more than one color of text... convert forms converts just one color. I would like to know a work around that. Currently, I create separate layers for different text colors and try to align them manually... a lot of your time. I know that InDesign would be best for this kind of thing, but Photoshop works very well for me, asside from this little thing).

  Method 3: Flatten my whole design (text and everything) at 300 dpi. My text will look like flattening crunchy at this resolution?

  Thanks to all who can help clarify this for me. I read so much incompatible information online that I don't know what to think.

  It would be great if there were a being all put an end to all the applications that actually everything we dream in one application. Maybe someday, but it's not the reality at this point. There is no IllustPhotoDesigner, so we need to deal with what we have to work with. It beats paper and pens, at times, but it has limits as well.

  In fact, In Design is much easier to use then Photoshop. You take the tool like Photoshop and type text. You place the images using the place command. You create PDF files by exporting to PDF or use the print dialog box.

  Photoshop is great for editing images of several kinds. Text is not really one of them unless you perform a text as a graphic you want to create an image in the text.  Creating a paragraph of text ends usually soft because if you're setting type in Photoshop, you are dealing with the resolution of the file so that if you type set In Design, you are not limited to the resolution of files, but the resolution of the device output you print on.

  The extent of the Junk Mailer - only cowards use a fake name to communicate.

• Does anyone know how to merge two workseets number for printing?

  How can I combine two spreadsheets in numbers for printing?

  Hi jj,

  I assume that you mean that you have a single document, which contains two worksheets, and that each sheet contains one table (only?).

  What do you mean by "merge two (booklets)?

  You mean you wan to place Tables of two leaves on a single sheet (this sheet would contain then both tables).

  Or do you mean you want to place all data on the two tables into a single table on one sheet?

  Or do you mean something different to both of these descriptions?

  Kind regards

  Barry

• My album will not download for printing

  I created an album with Photos, but when I order the album program is unable to complete the download. Either it stops at 54 percent, or 103 percent.

  are you trying to order a photobook Photos or prints of your photos? l don't know what you mean by "album for printing.

  IF you try to order a book, you have created a PDF preview? Is the preview OK, or it also crashes?

  you have any firewalls or active antivirus software, which could be to intercept the connection to Apple?

• Looking for a SuperDrive drive as a device for Blu - ray

  I'm looking for a SuperDrive as device for Blu - Ray player.

  I'm looking for something that is portable and reliable.

  Someone at - it recommendations for me?

  I want to use it with my Macbook Pro and perhaps with an iMac.

  Thank you!

  External Blu ray for Mac

• Add-on for Print Edit does not work

  I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

  Hello

  Did you mean this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  The contact details are on the right side of the page, next to the section 'on this add-on.

• Computer/device for College

  Does anyone have an opinion on the best computer or device for use of college? I'll be with specialization in computer science.

  I will return with a MBP

  As someone that HE teaches at the University - I find that the Pro was better than Air

  Also as the common wisdom goes - fetch the highest RAM and size SSD that your budget can afford in this order - with the macs of the retina - while the SSD can be replaced at a cost of warranty or you can buy an external hard drive - the purchase of RAM is more or less final