no disk or internet

Similar Questions

• New disk hard internet rcognizing not

  I have a B110 Dell Demension that I swapped to hard disk with new and recharged with initial start-up diskettes. Now, it will not be recognized my broadband internet connection. I went to tools and internet to internet set-up options, but it still will not recognize

  Hi James,

  After a reset to factory on a Dell PC, Dell recommends that, reinstalling device drivers are carried out in a particular order. Please refer to the link below, to find out how to reinstall the drivers for your

  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=1A0C0937D62A8739E0401E0A55174744&doclang=en&l=en&s=DHS

  Good luck.

• Can I use the cloud to adobe from an external disk in internet cafes etc.?

  I'm travelling and I would be able to leave my macbook sometimes (as in the country where I had rather not carry such an expensive thing with me), however I use adobe suite cloud on a subscription to treat all my photos...

  My question is, can I keep following adobe on my external hard drive and the runoff which in internet cafes etc.?

  I use Bridge, Lightroom, Photoshop and sometimes the Prime Minister for the most part.

  Thank you

  Sarah Stackman

  The cloud is a delivery process... the programs always install on your local hard drive

  Installation actually Windows entries in the registry system, which means that programs will not run away from the computer where it was installed

  I don't know if a Mac has a similar process, where the player must be with the computer where it was installed

  This is an open forum with a mixture of program users and staff of Adobe, Adobe support... you need Adobe support

  Coordinates of Adobe - http://helpx.adobe.com/contact.html can help

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Why is my hard disk so full, double the size of important things in the file Explorer?

  My 222 GB HDD is almost full (6.65 GB of free) but I can only represent 100 GB through to Explorer to count the volume of used, including hidden files - by looking at what is individual folders and their subfolders suggests that this lower position is correct. What takes all the space? Can we recover some of them? I am running Vista Home Premium SP2 on a Dell Studio 1535, equipped with a recovery of 10 GB drive (4.34 GB used). I did disk cleaning, including deleting past restore points, check the disk, Defrag, internet deleted files and searched malware. My maximum storage space is 33 GB and my pagefile is 3.97 GB. I started to compress the drive, but that seems to be dodging the real problem.

  Hello

  This option to delete is in Windows Disk Cleanup.

  And it will then remove those that are no longer seen work done on them for some reason any.

  Who has always been a scarecrow as recommended by Windows, or used, that you leave them there for a week and remove if they were still there even the work that Windows has been done on them, after a week, being finished.

  It has always been an unsatisfactory explanation for my reasoning.

  You can also get to them using the command: folder

  Here are some tips on this subject:

  http://pcsupport.about.com/od/maintenance/HT/manualtempvista.htm

  First of all, as they are now known, run clean disc again, making sure that the Temp files for detected option is checked.

  And many people like to use this cleaning program too;

  http://www.Piriform.com/CCleaner

  But do NOT use the Registry Cleaner to this part.

  See you soon.

• MacBook Pro upgrade to SSD HARD drive

  I own a MacBook Pro (mid-2012) with 500 GB HARD drive and want to update on the HARD drive. I want it to start as a new laptop after recovery. I don't want to back up my data.

  So, if I insert my new Samsung 850 EVO (250GB) replace my mac HARD drive, I'll be able to install OS X on the new disk hard Internet of recovery?

  Yes from the internet recovery (option command R), you can access the disk utility to format the new hard drive.  Recovery of the Internet will offer the OS X that originally shipped with your Mac from 2012. You then spend here.

  The options are to make a bootable installation before hand.

  http://www.Macworld.com/article/2056561/how-to-make-a-bootable-Mavericks-install - drive.html

  http://www.Macworld.com/article/3092900/Macs/how-to-create-a-bootable-MacOS-sier ra-Installer - drive.html

  the relevant information contained in: How to create a clone of startup

  MacBook Pro (15-inch mid-2012), OS X El Capitan (10.11.6), i7 480 GB SSD 16 GB RAM iPhone5 iOS10.0.1, Parallels10.0.2, HP OfficeJet Pro 8620

• Why flickr does not work with firefox

  I'm trying to copy images/textures on flickr via a right click on the photo. I don't get the option to see all the dimensions of the image and/or download it or copy the image. These aren't protected files, the owner is available for free to anyone who wants them. I am able to copy these on my hard disk with internet explorer, but not with firefox. I prefer to use firefox. Is there a solution to this problem? Thank you.
  Lisa Hatter

  Hi Lisa, my screenshot is from Firefox on Windows 7 27. When I open this page in Internet Explorer 8, the image is full-width and the sidebar controls appear below the image. Flickr also said that ie8 is not supported. In any case, try to view the full image size and using the menu «...» "instead of right-clicking. If I think of a faster way, I'll post back.

• UCX551-54E6R3-XD002J-60QM03

  I tried to restart my laptop, but get a blue screen that is not the normal blue death screen, but looks like a Sun radiating down into a semicircle with a larger than normal boom head that can move with my mouse but nothing happens when I turned off and get back to the top.  Be with the start of normal mode or recovery mode.  I noticed a short cmd window to run from near the top but could not see what he was doing.

  I did some diagnostics and got an id of default dst short of UCX551-54E6R3-XD002J-60QM03, while performing the test on the hard drive under the hp advanced system of Diagnostics.  You have the same error when you try the test at startup?

  Can / should I try to take the hard drive and put it in an external shell and using another laptop to try virus scan it from another laptop?  I have norton antivirus, but not sure that my children have run every week.

  Should I pay a Fryes electronics to try to fix it?  $70 for the diagnosis and wrong to the fix even?

  Norton Rescue is not the same thing as the recovery disks. I don't think that Norton can reinstall an operating system on a hard drive of nu.

  Recovery disks. (Internet Explorer often fails on the second step of the order. Use Firefox)

  https://h10025.www1.HP.com/ewfrf/WC/mediaOrder?softwareitem=618114-001&CC=US&DLC=en&LC=en&os=4063&Product=4221431&sw_lang=

  Hard drive is usually simple to remove. See Maintenance & Service Guide:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&lang=en&LC=en&product=4221431&

  Example of a hard drive that works:

  http://www.Newegg.com/product/product.aspx?item=9SIA2W00ZC7762

• Symbol of the constant 'thought '.

  My cursor indicates a "symbol of circular wait" as if the computer is thinking.  Everything works fine, but the symbol appears intermittently.  How can I get it to go?

  Could be several reasons.  Out of memory if the machine is constantly writing data to and from memory to disk, slow internet connection, fragmented, (coupled with the lack of memory) insufficient swap space, the old machine - we have no way of telling.

  Lack of memory could be due to too many processes running at once.

  Press CTRL-ALT-DEL and select Task Manager.

  Select the performance tab and which will show you your CPU usage and the memory usage.  If use figures are close to the maximum, then you have an idea of the problem.  Try to close as many programs as you can to see if it improves matters.

• error code 0 x 80240036; The Explorer is not updated to XP SP2

  I installed Windows XP Media Center Edition SP2 disk; then Internet Explorer 6.0.2900 would end like MSN.com loaded about 20 times. When I stopped to MSN.com, IE would continue.

  I then clicked on , then

  The window loaded and checked to make sure I had the latest version of the update software loaded.

  Then I clicked on custom and then update the IE Web site has failed.

  Various error codes are displayed

  1. 0x8024400c error code

  2. error code 0 x 80240036

  This prevent me to update my installation of windows

  You must be at Service Pack 3 level before you can use Windows updates.

  See: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• PSC 1215: scan '

  Print ok

  Will not scan using the Director - nothing happens at all.

  Software RELOADED from disk and internet several times.

  found by experience that clicking hpqscnvw shows the scan screen and allows a sweep.

  gives only the screen with preview accept. Preview makes a second analysis, but accept inactive button.

  Now at a loss.

  s/n [personal information deleted] fw usb connectedservice id 25036 r0025xxnxfh1 - info of "cancel + color.

  Help please.

  Dave

  Hi rainbow7000

  Thanks again for your contribution.

  I have not completely abandoned, but as I use Paintshop pro to scan - it has relieved the problem. My computer and the printer are somewhat oldhat now, I can leave things as they are and update both in the not-too-distant future.

  Thank you again...

  Dave

  PS I also have a minor problem with the absence of sound, resolution of which can change the siruation with sweep! The shop are on the track...

• Wired network problem

  I have a problem abreast to get my Vista laptop to connect to a properly wired. A brief diagnosis is that ive been using for almost a year only on wireless but ive now moved into a place where the cable network is mandatory. If I plug the network cable before starting or the UN-sleep moding it works very well for about 2 minutes approximately and then stops. If I plug while it is initialized to towards the top and not in sleep / off then it will try to identify the network and then give me local access only.

  I'm pretty sure it's a problem of windows software, I started from a Linux disk and internet worked well, I'm also certain that the internet itself works because im typing this on my other laptop that also runs vista (both 32-bit) and he seems to have no problem with the connection at all.

  Thanks for any help you can offer.

  Hello

  Check computers support sites and make sure that you use the latest drivers for the network adapters.

  Check support for the router and make sure that your using the latest firmware for the router.

  Also, read this http://support.microsoft.com/kb/928233

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "Refresh" Argh! Where everything gone!

  OH NO.!

  I'm new to the top of my XPS Gen 10 years 3, running Windows XP Pro.  My new Dell is a XPS of 8500 running Windows 8.

  Navigation recently caused a flood of what 'I' considered boring "apps".  Please forgive my stupidity as age and MS have made things difficult for me to stay out of trouble with the new terminology.

  This morning has been a disaster.  I'm used to things on my Windows desktop.  All these "apps" that has collected over the months with my new Dell were rarely visited on the other side of the "windows" key  Then small hours of the morning I plugged it into a USB jump drive to transfer files.

  The new '' informed me that there was something wrong with this device.  He could not repair the fault and repeated in the other USB ports attempts have had the same results.  Now the serious problems blew:

  1. Then, I decided to continue to look at the "Terminator Salvation" disk that had already played in the Blu - ray player.  To my surprise: the 'disc' was no longer available for use, the PowerDVD software or on the Device Manager list.  "A registry error" was the reported cause.
  2. I suspected that the defective USB might be the bad guy, so I removed and restarted.
  3. Still no solution for the disk drive.
  4. I then went to the "System Restore".  After several points does not restore, I found one that worked.  The Blu-ray/DVD player has been recognized and worked.
  5. To improve the chances of restoring "good" points if the need arise, I increased the memory available for the 'system restore' of 2 to 15%.  Then created several others.
  6. Output I noticed the option: «If you are having problems with your PC, you can refresh it...» »

  I was fooled by the innocent-sounding term "Refresh".  "It would be to get rid of all these last echoes,"apps"like browser toolbars and their ilk!  After all: I just created several new Restore Points to back me up.  What could go wrong? »

  The length of time that takes the process of "refresh" caused a bit of concern.  But the final result... main software purchased for download, including Office 2010 Pro, Cyberlink PowerDVD 13, Iolo System Mechanic 11 Pro, Avast Pro, had devastated with what I had considered those annoying little "apps" that swarmed in each web page, I have visited.  The other stuff: games, etc., gone - were a minor annoyance in comparison.

  'Refresh' bluff given as my Outlook email and Word documents.  To my horror added: missing were also all previous restore points.  I can have confused terminology like "apps" to "programs", but the fine print did not mention that.  Office 2010 downloaded files "seem to" be there, but the configuration file was disabled too.

  Can do nothing to remove one "anything?  To compound my problem: all my online purchase records were carefully organized with Word 2010 - in the files "docx" who can not read my old copies of Word.

  Any suggestions are welcome.

  

  Everything that happens during a refresh is specified on the screen when you perform the update... that "Apps [Applications = programs] that you have installed the drives or Web sites is removed", which should not have been much of a surprise.  (- As in th Metro 'tile' apps - Apps can be obtained from the Store, so when he talks about apps installed from other sources (disk or Internet sites), it can only talk of anything else on the computer.)

  In regards to your personal files, they have remained all intact UNLESS, of course, you choose Reset instead of refresh.  Reset deletes all data and applications.

  If you perform a reset, then the best course of action is to restore your backup files (hoping you execute this important function).  If this isn't the case, then you try to use an 'undelete' program to try to recover these files.  Send the drive to a recovery expert would be preferable (although expensive) to extract the files.

  Most of the apps buy you Web sites will give you access to your account to get the software and keys.  Office, Avast, and System Mechanic is not problems at all.

• Adobe Acrobat 7.0 - reinstalled on the new PC, impossible to activate, the Adobe customer service sent link to download the new? others? Version. Installed, but on the installer said series

  With raw interface of Adobe, I thought that the screen that gave me was to ask the question; He didn't inform me that I was typing the subject line. But unless clunkily review:

  Have an old but legitimate copy of Adobe 7.0. I had to get a new computer. I reinstalled A7.0 of my disks, but Internet and phone reactivation failed. After having jumped through the independent windows on the Adobe site, found the link to Customer Service chat. The representative told me that I had to download a new one? different? A7.0 version leave a link, he sent me. I did it.

  I have successfully downloaded the new? version 7.0 and installed it. But the installation, when I was asked for my serial number, he said it was an invalid number. I tried again, without dashes, without success. I went back to the Adobe Customer Service, where a person told me that I had to download a new? different? A7.0 version. I told her to re-read my original post, I had already done. After a long wait, she told me that she did not know much about A7.0 and told me to go to the Adobe communities.

  So, Adobe communities, here hoping one of you has the most knowledge about the installation of Adobe Acrobat, Adobe Acrobat Customer Service!

  Thank you

  Marc

  Sounds like you are trying to install with the ORIGINAL serial number provided with your product rather than the NEW one with the download.

  Adobe do support the last two versions (10 and 11) so if they have knowledge of 7 at all it's just a lucky accident...!

  Furthermore, I hope that you install on an old computer to Windows XP, because you won't get far in Windows 7 or Windows 8 with this version...

• Captian El is not installed on the SSD disk fusion part after recovering from the internet

  I found that my Mac OS X El Captian is installed on the part of the hard disk of 1 TB disk fusion rather than the part of the SSD drive after the installation of recovery of the internet.

  And the SSD disk fusion part seems to be "not fitted"...

  May I ask if this is correct?

  I saw on the article depending on whether recovery facility will automatically take care of the promenade of the merger and put the files system on the part of the reader Flash memory:

  http://www.PCMag.com/Article2/0, 2817,2412726,00.asp

  If my drive information below is not correct, do the following:

  1. partition SSD disk fusion part and

  2. Mount and

  3. repeat to Install OS X on this SSD part internet recovery rather than the part of the hard drive of my 1 TB drive

  Your opinion is greatly appreciated!

  Images of the State of my hard disk is shown below:

  

  

  

  ... also, I found that there are 2 Macintosh HD, showing at startup. If I choose a 1st, a banned logo will appear once a while and the will of the computer just froze there. Only when I choose the 2nd Macintosh HD, I can login in the OS correctly...

  Should not be only one Macintosh HD picture to the choice at the start?

  Emergency assistance is needed...!

  Thank you!

  

  

• When I installed 10 windows on my mac, I accidentally deleted the MacOS Partition. I made a new D: drive partition in Windows 10, but when I go to the restoration of the internet and try reinstalling Mac, it says that the disk is locked. How to unlock thi

  So basically, I downloaded the ISO of Windows 10 file and installed using boot camp. During installation, I accidentally formatted the Mac OS partition and replaced with the windows one. Now, I'm trying to reinstall Mac OS using the internet retrieval feature. I partitioned a new D: drive named OSX, and there is no data on the disk. I then click on reinstall Mac OS. I try to select the disc of OSX I partitioned, but it says that the disk is locked. Anyone know how to unlock the drive or should I do something else?

  Thank you very much

  CJ

  I think one of the problems might be that my Windows partition has replaced the C: drive where was the OSX partition. I tried to move the Windows operating system on a drive b or e :), but it won't let me. Let me know if this could be a problem too.