No disk Vista not supplied with the laptop

Similar Questions

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• How to get the key for windows 7 already installed and supplied with the laptop.

  I bought Lenovo laptop, 2 years back, and he had windows 7 Home premium.  Now it is showing my windows cannot be real and asks for the key for verification. Key was written on a label on the back of my laptop. The key is now unreadable on the sticker. I'm looking for the key to verification?

  If the product key on the COA sticker is damaged, then your options include:

  Reinstall Windows 7 using the supplied with your laptop Lenovo recovery partition:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and request replacement CD-ROM

  If these options are not available, you will need to purchase a new product key for Windows 7 Home Premium.

  You can also try to do a restore of the system before you start, facing this problem to see if suits him.

• Why Toshiba laptops are not supplied with the common Vista installation CD

  Our House now has two laptops from Toshiba x, which were provided with MS Vista Home Premium pre-installed.

  The nature of the medium of recovery provided with these machines is such that (a), we do not have enough flexibility to the volume/partition sizes, locations of program etc. and more specifically.

  It makes it necessary for the majority of the supplied software (Norton Security etc.) should be installed by default in the case of a system failure. (And immediately uninstalled after recovery! A useless waste of time).

  In view of the fact that a proportion of the price paid for each laptop must have included a cost for the Vista operating system, do anyone know if it is possible to get a recovery disk of master which consists ONLY of the operating system, and allows us the flexibility of configuration that was available when the OS was purchased as a separate product.

  In addition, please let me know if it is possible to buy Toshiba laptops as a machine to RAW, IE no BONES no provided, and I'll then buy my own and cut out the garbage that are provided on the pre-installed medium.

  Hello

  If you need a DVD of Vista as the original DVD of Microsoft Vista you will need to buy!

  Toshiba and other computer manufacturers create a clean recovery disk which includes the Windows operating system, the drivers, tools and utilities to simplify the laptop restore.

  Using the recovery disk, you can restore the laptop to the factory setting within 10 minutes.

  In addition, this Vista OS is supplied under OEM license and can be used with this laptop

  Concerning

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• How can I know my product key if I can't read it the sticker on my laptop and can't find it in any document supplied with the laptop?

  I have windows Vista Home Basic and I had a virus my laptop so had to wipe it and re install windows, but now he asks me my product key that I can't read the sticker as he had ripped a little...

  If you reinstall of the manufacturer's recovery disc then it should not ask for a product key.  That said, it is there no trace of the product key printed on the COA sticker on your computer.  Stickers are applied in batches at the factory and no record is made of what product key is associated with a specific machine.  I'm sorry.

  Check with the manufacturer if your computer has a recovery partition.  Who restores Windows to its factory condition.

  What kind ot disk you install from and entered with your computer?

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• Intel WiDi is not compatible with the laptop Satellite P850

  The topic of the thread is a bit hypocritical - apologies.

  The essence of my post is that Toshiba announced the Intel Widi feature as part of the Satellite P850 laptop when in reality it is not supported. It was one the reasons I chose this laptop and saw no. need to check its compatibility with Intel - why would I if a company with pedigree of Toshiba's advertising as according to the specifications of the laptop?

  http://UK.computers.Toshiba-Europe.com/innovation/product/satellite-P850-12Z/1126054/toshibaShop/false/

  After following all the steps of configuration and the functionality does not, I contacted Intel and they informed me the Intel processor in this laptop is not supported (3rd generation Intel® Core i7-3610QM)-despite the Toshiba say otherwise.

  An explanation would be appreciated that this very useful technology will lose in this laptop, otherwise great.

  I can share my knowledge with you on Intel Wireless Display.
  To use the Intel WiDi, you the components of this system:

  ONE of the following processors:
  Processor Intel® Core i7: 640M; 660LM; 640LM; 620LM; 620 M; 610E; 690UM; 680UM; 660UM; 640UM; 620UM; 660UE; 2710QE; 2820QM; 2720QM; 2635QM; 2630QM; 2657M; 2649M; 2629M; 2620M; 2617M; 2540M; 2520M; 2510E; 2640LM; 2620LM; 2630UM; 2610UM; 2530UM; 2920XM
  Processor Intel® Core i5: 580M. 560 M; 540 M; 520 M; 480 M; 460 M; 450 M; 430 M; 580UM; 560UM; 540UM; 520UM; 470UM; 430UM; 2540M; 2520M; 2410M; 2537M; 2430M; 2435M, 2450M; 2467M
  Processor Intel® Core i3: 390M. 380 M; 370 M; 350 M; 330 M; 330TH; 2310M

  GPU: Intel® HD Graphics

  ONE of the following WLan cards:
  Intel® Centrino® Wireless-N 1000, 1030, 2200 or 2230
  Intel® Centrino® Wireless - N 2200 for desktop
  Intel® Centrino® Advanced-N 6200, 6205, 6230 and 6235
  Intel® Centrino® Advanced - N 6205 for desktop
  Intel® Centrino® Wireless-N + WiMAX 6150
  Intel® Centrino® Advanced-N + WiMAX 6250
  Intel® Centrino® Ultimate-N 6300

  Preinstalled system:
  Windows 7 64 - bit, Home Premium, ultimate or professional
  Windows 7 32 - bit, Home Premium, full, professional edition, or Basic
  32-bit editions and 64-bit of Windows 8

  Also the Intel My WiFi Technology (Intel MWT) and Intel Wireless Display must be pre installed and activated.

  If your laptop does not perfectly these requirements, Intel WiDi cannot be used.

• Wireless printer does not work with the laptop running Windows 7

  Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

  The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
  They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

  and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

• printer not comminicating with the laptop wireless

  just bought epson xp402 printer .works on usb, connects to the wifi .but wiil not print. all I get when asked to print is a window showing empty ink levels and a notice indicating that not ready. It seems that they do not communicate. aid, laymans terms please...

  Hi William,.

  This problem can occur if the network discovery is not enabled, incompatible drivers, incorrect settings of the printer, lack of updates, or due to a problem with the printer.

  Method 1:
  First, let's run this fixit who will help resolve the problem.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:
  If the problem persists, I suggest you make sure that network discovery is turned on.

  Check out the link:
  Enable or disable network discovery
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Method 3:
  I suggest you try the procedure described in the article and see if it helps.

  Wireless network card: how to change the settings of the printer network (Infrastructure mode)
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=en-GB&kbid=372853&data=0ccCGROWIYMPYEG96Fc6zsl5DanPn7NLjkTApGU002FKSawU003D#toc2

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows XP was corrupted file & wouldn't work, so charge kit Windows advantage for Vista.Now computer is not registered. Just, I want XP back origin, but are not supplied with the computer installation CD.

  If Windows has a file corrupted in C, does not work, so I loaded the {32-bit} vista advantage kit it is genuine Windows product, I don't have 25 digit code {on pkg only 22digits}. Worked and less (media player would not read DVDs {something about codecs}) for a few weeks, and then all of a sudden it started asking for validation. Now, he tells me that I have less than 20 days to validate product b4 Windows do not work {has already taken my bkgrd screen} I'd rather just go back to XP {that my laptop is designed 4, however Vista capable} & I have no idea what I did when I loaded vista {as well as partitions, fat or? file}. I have had no problems w/XP before & I do not know if some1 piggyback on my computer via a public network caused it or what. Please help me solve this problem somehow! I'm not ignorant but not very savvy computer programs either. I know the basics! Thanks =)-

  Hello RosemaryR,

  1A Windows preinstalled on your computer?

  2. do you have a product key that is provided when you purchased the computer?

  You will need a valid product key to activate your old copy of Windows. You will also need a disk. If Windows was preinstalled on your computer, I suggest you contact the manufacturer of your computer to help you better.

• Instrument i/o Assistant not installed correctly. No driver file not supplied with the student of Labview version.

  I installed the student version of Labview and the installation of 99%, there was a window that came.  The image just below this sentence "Installer of year DVD drivers NOR the device" at this link: http://www.ni.com/gettingstarted/installsoftware/instrumentcontrol.htm is the window that opens.  Now the problem is that I don't have a driver cd.  I downloaded a student version: http://ftp.ni.com/evaluation/labview/ekit/other/downloader/2012LV-WinEng_downloader.exe .  It is an installation file.  Then I tried to download a file of drivers, I came here: http://joule.ni.com/nidu/cds/view/p/id/3145/lang/en and I used the exe file that stores a file on the computer.  The record is just full of stuff like .bin files ect.

  I then reinstalled everything after you have uninstalled it and return to 99% a few times, and the same window came that I listed above.  I try and tap the window the the location of the driver in all folders.  None of them work.  I even tried pointing to 488,2 records, IEEE and Visa, I downloaded and they do not work.  This message in red in the window remains, 'the specified folder does not contain the correct volume' and it gives you no idea what its looking for.  So I just said to skip that part and it finishes the installation.  I put in my access code and that seems to go ok.

  After installation, I install the drivers IEEE and Visa 488,2.  Visa seems to include the wizard of e/s to istrumentom some how, but it does not solve the problem I describe below.

  Then I go in and launch Labview and I start a project and go in view the block diagram.  I'm going by dragging in the "Instrument i/o Assistant" to connect a voltmeter of pcib-usb. When I double click on the "instrument I/O assistant" window "Measurement & Automation Explorer or the instrument i/o assistant isn't installed correctly.  Please install these on the LabVIEW driver CD.  But even once, I downloaded the driver CD seems unnecessary.  The directory of the driver folder is NI Device Drivers > Aug12 > Products > "a whole series of .msi files and .cab files ouch.

  All I need is to access the Instrument i/o Assistant so I can set it up to connect with an instrument, I can be sure my program communicates properly with an instrument.  However, this is the 3rd day in the struggle with this program.  I was too frustrated this post yesterday and I'm feeling much better today.  Any suggestions on how to get this set up correctly?

  Yes! Yes! ... sigh Yes... problem solved.  Aparently the driver download was not complete and it was not obvious until he had not downloaded part 2.  Therefore part has been downloaded drivers and it solved all my problems.  Choir of angels chimes in "Haleluah!"  OK thanks me and all wizards!  Pats me on the back.  Job well done.  o / glad I could get that off me chest.  And to think that some people paid, others to be able to listen to them talk to themselves D hehe.

• HP Notebook: My Ethernet cable supplied with the laptop is damaged and needs new cord. How can I get a new one.

  Need new Ethernet cord that attaches to my router. But I have an extra cord (yellow) for my router. Can I use this rope? The case where and how to get the new cord. Connection is lowsy...

  Hello

  Many router vendors include a CAT5e cable with routers and in many cases, they are yellow. Didn't the yellow cable come with your router? If Yes, you can use it.

  Kind regards.

• HP DV6 3103 sl-do not start with the new RAM

  Hello

  I have a Hp Pavilion DV6 3103sl with a dual boot W7 - W7,

  I don't want to update the 8 GB RAM, and here's the problem:

  I tried to add a new Corsair 4 GB of RAM for 4 GB samsung which is already there, it did not work.

  so I thought that there was a problem of compatibility RAM of coupling of different brands and

  I tried to use the Corsair only: it didn't work again.

  Long story short, I tried two different 4 Go Corsair-1 Kingston 4 GB 1333 Mhz 10600

  I tried alone without the RAM samsung and all three do not work with the laptop.

  He continues to start again OR it gives a BSOD

  What should I do? It is impossible that all the 3 banks of RAM I tried are defective...

  Thanks for your help

  To properly upgrade the memory in your laptop or desktop PC, it is recommended that a pair identical memory compatible modules guaranteed of a well known brand is used to place the original single module. Remove the original module.

  Ability to mix, brand, speed module... essentially of the differences in the module is usually held in one upgrade failed.

  Samsung module memory + module Corsir = memory upgrade memory failed.  Kingston 1333 Mhz + module Corsair 1066 + upgrade module memory has failed...  These failures are expected.

• I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

  I need to reinstall xp on my nx6125

  I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

  Hello

  Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
   
  If you face any problem regarding the installation of Windows XP.
  You can contact our Windows activation service.
  Here is the link:
  http://support.Microsoft.com/kb/950929