No display wireless or WiFi networks

Similar Questions

• Samsung wireless surround does not work with Airport wifi network

  I have a smart tv with a Soundbar and wireless - all Samsung two speakers. I should be able to set up surround sound via the network wireless like this http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 629802 & modelname = WAM7500 & modelcode = WAM7500/ZA

  It works fine when it connects to the router provided by my ISP sky. But when I try to do the same when connecting to the network created by the airport, it won't work no-more precisely, I'm unable to select "link Multiroom' (step 19 in the link above).

  Note: There is no problem connecting to the wifi network - it's this last step which is the issue.

  Any ideas as to why this may be the case?  I need to use the extended network of the Hub of sky wifi is very low when the TV is.

  Here is the configuration...

  Router-> Airport Extreme-> Airport Express-> TV + Surround Sound

  (Airport extreme is the bridge mode value and the expansion of the wifi network Express).

  Thank you

  Jeremy

  TV: Samsung UE40H6400

  Soundbar: Samsung HW-K650

  Rear speakers on your TV: Samsung R1 2

  I'm not familiar with Samsung wireless speakers, but let me see if I can help. What is the brand and model of your router provided by Sky? You have configured to provide a Wi - Fi network? Is the Wi - Fi network, provided by the extreme and extended by the Express, a second wireless network with a different SSID or using the same SSID as provided by the router from the sky?

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Unable to see a wifi network with Atheros 5005 g wireless network card

  Hi, new to this.

  I tried Hnatyshyn best part of a month for my Equium M50 PSM59E to see a wifi network that broadcasts on 13(unlucky for some) channel.

  I can't screen authetication for network WPA - PSK on the wireless network settings. The wireless network card is the Atheros 5005 G with the latest version of the driver downloaded from Toshiba and KB893357 Knowledge Base.

  The network is visible in this computer with a plug in DLink DWLG650 +, how the Atheros to work?
  Soon Alex

  Hello

  are the two of you using Configfree? And the most interesting thing would be: what system are you using?

  Otherwise I can give you a link to another thread where you can probably find a few info´s on the configuration of wireless network:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26088&MessageID=95706𗗚

  I suggest all of you to google around a bit. Most of the questions are either here in the forum in the section wireless or on some Internet sites that can be found with the help of google.

  Cheeers

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• How can I get my wireless printer to my wifi network?

  As the HP Installation Wizard does not work with the Mavericks, is there another way to get my printer wireless connected to my wifi network? This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider has recently installed a new router, so I have a new wifi network which works fine with everything else.

  I was able to get my two Airport Express to join my new network, using Airport utility, but I'm stumped as to how to get my printer to join the new network without the help of the HP installation wizard.

  Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of networks wifi under devices, such as hpsetup. But I got. Any help would be more approeciated.

  Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

  Bruce instructions, for anyone else having the same issue:

  -delete all printers already implemented

  -Rub old hp software and updated software for the hp 2.8 drivers

  -Unplug the usb cable from the printer if you have connected

  -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

  -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

  -arrived in sys prefs > network and change the mac to hpsetup wireless network

  -go to the sys pref > print scanning

  -Add the HP 8000 printer

  -Click the supplies button and options and click on the printer to show Web page

  -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

  -finishing (this page may freeze.  Close the browser)

  -Return to the sys prefs and change the network wireless to your networt

  -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

  -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

  -try to print something on your printer.  It might take a bit of time first impression.

• S10-3 questions of WiFi: Wireless function / antenna disabled - unable to connect to a WiFi network

  I recently bought an IdeaPad S10-5 / Type 0647 / Windows 7 operating system.

  I can't connect to a local wireless network at all. I can't even see all WiFi networks in my grand that I can see with my notebooks in use.

  Atheros AR9285 wireless network adapter driver seems to be updated ((version dele de pilote est 8.0.0.279).)

  I tried various things such as deactivation and activation of wireless networks / adapter, looking for the latest version of the driver etc without success.

  I activated the WiFi to the computer (setting of the HW switch) and but if I go through the (Systemsteuerung) Control Panel and Device Manager I get the message AdapterLAN connection or the wireless function is disabled

  Lenovo ReadyComm told me that the antenna of the wireless device is turned off.

  If I can't solve this problems, I'm afraid I have to return this computer.

  Any help is very appreciated.

  Thank you and best regards.

  Hello and welcome,

  Uninstall Readycomm.

  cordially KalvinKlein

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• How do force you a T410 to recognize wifi networks?

  How do force you a T410 to recognize wifi networks?

  I have a t410 that my company has released me.  Works fine at the office on a wired network.  But I can't take anywhere and use wifi.  The only network he displays when you click the network icon in the status bar is Verizon Wireless (which is not the same configuration in our laptops).

  When you click on network and sharing Center, and then manage wireless networks, all networks wifi, I need to use are here.  But it won't recognize them.  They are all configured properly.

  BTW, with my Macbook Air adjacent to the T410 and connects to my wifi network instantly.  Network plug from your cell phone, both are set up the same.

  Our it guy says I should remove and reconfigure each network.  It does not help.

  Any suggestions?

  After the validation I continued searching this forum for an answer to my problem.  I found an old post on the t410 turn off random wireless connectivity.  It does this without any notice.  The hotfix that is described in this post is not applicable to the version (current?) of Thinkvantage on my new Lenovo.

  Here's the message I think solved the problem:

  -----------------------------------------------------------------------------------------------

• My wifi network connection does not appear

  Hello! I hope someone here can help me out.

  The other day my household switched internet companies, and they gave me a new network name and password to connect to the wifi. However, the new network is not displayed on the list of my laptop Vaio wifi connections! My neighbours networks are all appear, and I am still able to connect to other wifi networks, so it doesn't seem to be a problem with the WiFi on my laptop (the wifi driver is up-to-date as well). In addition, my phone and Tablet have no problem finding and connecting to the network, identical to those of the other computers in my house, so I know that it is not a problem with the router or the connection itself. The router and laptop have all both been restarted, but that did not help either.  We tried to call the internet society, but they believe it is a problem with the computer itself, since it is the only one that the network does not appear on. It's just the network that does not appear in my list of available connections. I have never experienced a problem like this before!

  Can someone help me understand what could be the cause this and tips to help repair?

  For reference, my laptop is a Sony's Vaio, model number: VPCCB22FD, running Windows 7 (which is what it came with).

  Thanks in advance!

  Hi hard_shark,

  Welcome to the community of Sony!

  What is the type of your wireless router? (You can call your service provider if you don't know). Your computer is too far from the wireless router? It's pretty hard, but we're going to isolate it for us to solve the problem.

  • Power cycle or reset your router. (Even once, you can call your ISP for help). Power cycle your laptop as well. Just remove the battery and press the power button for 5 seconds.
  • Reinstall wireless driver. - Start -> type-> Device Manager double-click network adapters -> right click and Uninstall (DO NOT REMOVE) the wireless network card driver-> to restart the laptop.
  • If still the same then download again the driver wifi: Intel® WiFi Link 1000 BGN Driver then restart the unit.
  • Run the Windows updateand Vaio update .
  • Run convenience store -> Start -> type Troubleshooting -> click on network and Internet -> select network card , then follow the instructions on the screen.
  • go to the control panel-> (as read by: category) under network and Internet, select view network status and tasks -> click on set up a new connection or network -> connect to Internet -> No, create a new connection -> select Wireless and follow the instructions on the screen.

  Hope these helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• How to connect my Time Capsule to a WiFi network?

  Happily, I use a Time Capsule for years as a WiFi router connected as a bridge to the router provided by my supplier.

  Now, I'm moving to a place where internet is already provided by an access point in my new apartment and included in the monthly cost of the facilities in this village. The access point is hidden behind the ceiling of my apartment and doesn't have any port ethernet except the one used to get the internet. WiFi which will be available for me is configured by an administrator with the name of my apartment.

  My internet needs TC that the ethernet source and I wonder what I could do to work around this problem. I don't see any option in the settings of TC to connect to an existing WiFi.

  While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

  Tnxs.

  My internet needs TC that the ethernet source and I wonder what I could do to work around this problem.

  In a Word, nothing. The TC must connect to a network by using a wired Ethernet cable connection. The only exception to this would be a Workbench where you already have a router Apple providing a wireless signal, in which case the TC can connect wireless to "extend" the network.

  While waiting to move to the new apartment, I did a test by trying to create a scenario similar to the House, for example by using the wifi router of my provider to create a wifi network, then using an extension of WiFi that is connected to A WiFi network and connect my TC via ethernet connected on WiFi extender set up my TC as a bridge and the creation of a WiFi B with my TC that I can use with my devices. It works fine, but I wonder if there is something I'm missing or a better solution or possible issues related to this configuration.

  This is how the TC must be connected to the network of the apartment. If your extension does not work with the network of the apartment, an AirPort Express could be used to 'join' the network wireless of the apartment, and then provide an Ethernet connection to the Treasury Board.

• WiFi Solution - only wifi network

  Hey

  I live in Israel and how I get internet home is via a special modem that is also a router, this whole box is called HotBox.

  The quality of this refrigerator is VERY bad, but it's the only way to get internet here...

  Since I was little systems in my house requiring some specific open ports (smart home hub and dvr security cameras) the hotbox is really bad with the opening of the ports so I had to do a bridge inside mode, so it works as a modem and connected on it (some not expensive tp-link I'll change with time) an extra to work as opening and router port solution router.

  so far, it works fine.

  The House is large in the territory and I thought the best solution to extend the internet into an area away from the House, the basement which has thick walls and wifi signal is difficult to achieve...

  The inside of the wall, I have an ethernet cable that goes from the main tp-link router in the basement and there I connected a time capsule Airport (model 2014 if it made a difference, the new type of orders one) which gives wifi in the basement and an additional airport specially for the single harder.

  Everything works fine but a small thing, in the upper part of the House, I have Tp-link network (say 1) and in the basement, I have a different time capsule (Network2) wifi network.

  My question is how can I do the work of the entire system on a single network?

  I have to do the time capsule as a bridge or configure it somehow differently?

  Or is it still possible to do?

  Thank you very much for your help in advance!

  My question is how can I do the work of the entire system on a single network?

  Change the name of the network wireless on the Time Capsule so that it will be exactly the same as the name of the TP-Link network.

  In the example below, you can see the name of my wireless network is TWNDB. If I wanted to change the name, I change / move back the current name and then type the new name I wanted to use.

  

  I have to do the time capsule as a bridge or configure it somehow differently?

  The Capsule should already be configured in Bridge Mode if it has been implemented correctly, who calls Apple 'Off (Bridge Mode). If it isn't, then you must change the setting on the network tab, ensure the Capsule is in 'Off (Bridge Mode).

  

• iMac ceases to recognize WiFi networks at random

  In recent weeks, our iMAC ceased to recognize WiFi networks at random.  We will use Safari or Chrome and suddenly the taskbar will specify "resolving host" and internet connection will be lost.  Within 2-3 minutes, all the WiFi networks that were previously seen in Network preferences will disappear.  If restart us the iMAC, the WiFi network will work very well for 15-30 minutes, then it will be happening everywhere.  It is frustrating to have to restart the Mac frequently! What is also very ironic, is that when WiFi networks disappear for the iMac, our iPhones (2), the iPad and laptops (Dell and HP) always recognize wifi networks. Spoke to the Apple support and made us go to El Capitan, instead to call again, I thought that I would try this community.

  Here is our contact information for operating system and the actions we have taken so far.  Would be grateful to anyone who helps solve this problem.

  Operational details:

  • El Capitan - OS10.11.5
  • iMac (27-inch, mid 2010)
  • 3.2 GHz Intel Core i3
  • Processor: 4 GB 1333 MHz DDR3
  • 807 GB 1 TB storage is free
  • 2 WiFi networks available through DirectTV / AT & T 2.4 G with 5.0 G available
  • I don't have an Ethernet cable plug near this iMac

  When he saw this problem, I tried the following solution:

  • Reboot, obviously works but annoying and not a systemic solution
  • Network preferences > > turn off WiFi and then turn it back on
  • Create the new location and reconnect to WiFi networks
  • Previously on Yosemite and recently upgraded to El Capitan, did not work
  • Remove the preferences.plist, the network.identification.plist, the message files - draw .plist hoping to empty cache network
  • DHCP has changed IP manual and additional figures added to the final figure of IP address on the IP address of my iPhone
  • Changed automatic DNS server to direct DNS server from Google
  • Renewed DHCP lease

  No chance until then wouldn't like anyone's support there!

  Thank you

  a few items from apple are here please read it could help you.

  OS X El Capitan: the problems of connection to Internet

  OS X El Capitan: on Wireless Diagnostics

  OS X El Capitan: If you cannot connect to a Wi - Fi network

• 1 home 2 wifi networks

  I just added an ethernet cable from my modem and run the floor and attached to an airport express.

  I feel that I cannot expand my wifi network at the bottom and have created a new network on the floor.

  Now, these two areas have wifi under the 2 networks.

  The issue I'm having, which is on my iphones/ipads that they do not pass the network stronger depending on my location

  Any ideas on how to give priority to networks or can extend a network with just an ethernet connecting my modem to the A/E?

  The iPhone should be able to manage the channel width, otherwise, back to auto 20 / 40 Mhz.

  If you can, go to 5 GHz, you will see an improvement in wireless performance much better.

  Is the second configuration of the airport as a Repeater/Extender?

  If Yes, get another cable ethernet and Garland like this-> Modem to AP1 to AP2

  Give the same AP2 SSID and password as AP1, only she set to different channels.

  1,6,11 2.4 ghz and 5 GHz channels is 36 and 64 or 149 161

  Netspot to determine the best available channels for the two bands on the wifi.

• How can I see who is connected to my wifi network?

  How can I see who is connected to my wifi network?

  What is the brand and model of your wireless router that produces your Wi - Fi network?