1 home 2 wifi networks

Similar Questions

• Home Wifi network is not detectable!

  After implementing the lollipop, the my home WiFi network is not detectable on my motorcycle G. All other Wifi networks nearby make their appearance as usual except for the WiFi in my house.

  I tried the partition hiding wiping. Did not help.

  Then I did a hard reset on my device, after speaking to a Motorola Assistant, did not help.

  Is there something wrong with my router or my device?

  Lollipop does not allow for channels above 11 in Wifi - is your router set to use channels 12 or 13? It's the only thing that has changed in lollipop I know.

• Two different HP printers on home WiFi network went offline

  Have a HP Deskjet 3050 J610 series and a (rather new) HP Officeject 8600 on my home/office WiFi ditches.  Each is associated with a laptop of Lenovo under MS Windows 7 Home Premium. They are all both passes in offline mode, and I can't get back them. Cisco router SmartSys lists them as devices of the network well as offline (both). I rebooted the router and I've deleted and reinstalled the 3050 at least but still can't it connect.  What should I try next?  Thank you.

  When you configure the 8600 by using the control panel you have the possibility to use dynamic or static IP.

  Dynamics uses the address IP provided by the router DHCP while static is chosen by you, but outside the range the router DHCP.

  8600 Panel control print Network Config. page.

  Check the 802.11 wireless setting.

  For more information, take a look at this linkHP.

• Cannot access my home Wifi network

  * - Original title - access a network

  Host running Windows 7. Cannot access to my home Wifi network. Said an internet access, but then not access available. Access to the internet with an ethernet cable. Thank you

  Hi Gerard,.

  To provide a proper resolution, I would need more information on your side.

  1. that you get any code to error message while trying to access the wifi network?

  2. don't you make changes to the computer before this problem?

  3. What is the brand and model of the router?

  Follow these methods.

  Method 1.

  You can use the network troubleshooter and check if that helps.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2.

  We can refer to this article and check if that helps.

  Wireless and wired network problems: http://windows.microsoft.com/en-us/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab4&v3h=winvistatab1&v4h=winxptab1

  Additional information.

  Wireless network card: frequently asked questions: http://windows.microsoft.com/en-in/windows7/wireless-networking-frequently-asked-questions

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Windows 8 will not list my home wifi network

  Just installed Windows 8 on my laptop HP Pavilion dv7 that was under Windows 7. Now, he does not list my home wifi network, and if I try to manually enter it says it's already there. How to recognize my network?

  Vinod, I tried all of your advice without success and finally finished by calling the technical support of Microsoft Chat. A very competent technician, Urso U., quickly found the problem. Given that Windows 8 has been to see all my neighbors WiFi networks, he immediately handed to zero on my router settings. Well, it seems Windows 8 dislikes the "extended" mode 802.11 g who was broadcasting my Motorola WiFi Modem cable. By changing this one just setting and uninstalling and reinstalling the WiFi RealTek card in Device Manager (to restore its settings), my laptop now happily running on my home network. Thank you all!

• WiFi Solution - only wifi network

  Hey

  I live in Israel and how I get internet home is via a special modem that is also a router, this whole box is called HotBox.

  The quality of this refrigerator is VERY bad, but it's the only way to get internet here...

  Since I was little systems in my house requiring some specific open ports (smart home hub and dvr security cameras) the hotbox is really bad with the opening of the ports so I had to do a bridge inside mode, so it works as a modem and connected on it (some not expensive tp-link I'll change with time) an extra to work as opening and router port solution router.

  so far, it works fine.

  The House is large in the territory and I thought the best solution to extend the internet into an area away from the House, the basement which has thick walls and wifi signal is difficult to achieve...

  The inside of the wall, I have an ethernet cable that goes from the main tp-link router in the basement and there I connected a time capsule Airport (model 2014 if it made a difference, the new type of orders one) which gives wifi in the basement and an additional airport specially for the single harder.

  Everything works fine but a small thing, in the upper part of the House, I have Tp-link network (say 1) and in the basement, I have a different time capsule (Network2) wifi network.

  My question is how can I do the work of the entire system on a single network?

  I have to do the time capsule as a bridge or configure it somehow differently?

  Or is it still possible to do?

  Thank you very much for your help in advance!

  My question is how can I do the work of the entire system on a single network?

  Change the name of the network wireless on the Time Capsule so that it will be exactly the same as the name of the TP-Link network.

  In the example below, you can see the name of my wireless network is TWNDB. If I wanted to change the name, I change / move back the current name and then type the new name I wanted to use.

  

  I have to do the time capsule as a bridge or configure it somehow differently?

  The Capsule should already be configured in Bridge Mode if it has been implemented correctly, who calls Apple 'Off (Bridge Mode). If it isn't, then you must change the setting on the network tab, ensure the Capsule is in 'Off (Bridge Mode).

  

• iPhone 6s won't connect to VPN on work wifi but goes on other wifi networks

  Hello

  I have been connected to my wifi to work for a while and had to use a VPN to use things such as whats'app and access to sites like Facebook. It worked well until what recently just VPN logs not when I am connected to this wifi network. I know that the password etc and I get the symbol wifi at the top of my phone but never impossible to access Web sites (which was normal, but the VPN it fixed), but now I can not connect the VPN even more.

  The VPN application I use is Betternet but I've also tried a few others, none works. However, they all work when I connect to my own wifi network.

  iPhone 6 s - last version of iOS from today (28 Apr 16) cannot find the exact version on my phone

  Pleaseeeeee help me connect to my VPN when I'm on my work wifi

  VPN can be difficult, maybe to consult Betternet. Also see this article for suggestions.

  iOS: setting up VPN - Apple Support

  FWIW here are some general recommendations for Wi - Fi problems, maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• My iPad keeps disconnecting my wifi network

  My iPad 32 gigabit wifi with iOS 9.3.1 Pro keeps on disconnecting from my wifi network. From time to time I connect it disconnects just randomly and sometimes it makes me even to make the password again. I don't think it happens by other networks, but I don't know because I don't really bring my iPad too. Please help me fast! Thank YOU, a proud lover of Apple Inc..

  This started to happen to me recently too, I have the iPad Pro for about a month. It may be the 9.3.1. Update. It's apparently only happening on my home network and my Netgear R7500 (the worst tech purchase I made) is notoriously bad on the network of 5 GHz because of the chip Quantenna barely supported, which was abandoned by Netgear, shortly after the release, and as soon as they could they have released a R7500v2 with another type of chip for the 5 GHz band.

  So, I don't know who is to blame, it's probably a combination of both. I also have problems with this router and my Nexus 6 p, but apparently not with my other devices (iPad, iPod Touch gen mini retina 6, iPhone SE and Nexus devices). The difference with disconnects on the N6P is the phone disconnects and reconnects, the iPad Pro reconnect and exactly like you, sometimes it asks for the password again.

• My ipad cann't detect any wifi network. Please help me

  My Ipad cann't detect any wi - fi network. I rest a network setting, press power and home button and reboot several times. But can't detect any wifi network. Please suggest what I can do.

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Can't see Joikuspot wifi network

  I AT200 ICS 4.0 upgrade and I want to connect to the internet via Joikuspot premium (on my phone Nokia E6). JoikuSpot works fine and I can connect my laptop, but AT200 sees no wifi network.

  Anyone who has experienced similar problem?

  Hello

  Can you connect the AT200 to another Wlan using the home router?
  Also try the app called fixative Wifi.

  Welcome them

• Equium P200 1IR running Vista 32-bit Home - no WiFi

  I have a Toshiba Equium P200 1IR running Vista 32-bit Home with a wifi problem. The wifi adapter is an Atheros AR5007EG.

  The problem I get is endangered wifi networks and laptop connects to networks I use normally.

  I tried to reinstall the connections and passwords. I know that routers are functioning as my wifi phone can connect to routers, but the laptop will not.

  I removed the battery and reset the BIOS, I removed the adapter from the list of Device Manager and reinstalled, I updated the driver and restarted the laptop.
  I can see some time the wifi router and sometimes I can't. If I can see my router named it will connect to it.

  Sometimes, he will not recognize the router but when I use the Toshiba wifi doctor and run the radar feature, you can see the router but it does not show in the network and sharing Center, although I can see on the radar option.

  Any help would be greatly appreciated.

  Hello

  You update the BIOS?
  Please do if the laptop uses the old BIOS.

  In addition, you must update driver WLan
  You said you did, but I don't know if you used the latest version of m

  Here you can download the latest Wlan drivers.
  http://APS2.toshiba-tro.de/WLAN/

• Can't connect to WIFI on all locations where the WIFI network is available

  Sometimes my computer will connect and detect the networks without wire, Hotels, airports etc. but do not work in the home and in some offices.

  I run put WXP updated with SP2 have an Artheros5005gs adapter. Any ideas?

  Hello

  It is a matter of compatibility between the WLan router and wireless network card.
  If the wireless network adapter does not support the same Wlan standards then you will not be able to establish the WiFi connection.
  Especially the hotspots (Wlan on airports, city, etc.) are not secure and that is why the laptop automatically connects to these wireless LANs.

  The WiFi network at home or in the office is secure for most and you need a right encryption key to connect to these wireless LANs.

  So I think you should check you settings router WLan configuration and usage of encryption right key, SSID, etc.

• How can I configure my Time Capsule (its predecessor) as an extension of WIFI network?

  I have the previous model of the time Capsule and a new version and two MAC computers. I want to use the Capsule of ancient times to extend my WIFI network. I have a MAC with a new current version of time Capsule in the center of my house. I have a second MAC set up with an earlier version of a time Capsule in my office. I want to expand the network from the center of my home, further, beyond my office. Anyone know what I need to do? THX!

  Place the old TC in the same room as each other.

  Do a factory reset.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Open airport on the Mac utility and configure the old TC... it will automagically want to extend wireless.

  Complete the installation, then move the TC to a suitable place where it picks up good signal from the main TC. There is no need to a position of bad signal... then place it where the speed is close to full... but then covers your current area of dark (wifi not light).

  Fact... Voila... easy as pie.

• I have a question where I listed two wifi networks. It is not in use and Im trying to find out how to remove parameters from the airport.

  I used routers of the airport for a few years now. I upgraded my main router at a Time capsule and my old Airport Extreme and Airport Express works online as sub routers to keep the good signal throughout my home. All work well, but I always have what is the former name of wifi in wifi settings and would like to delete it so that it shows only the new name of the wifi network and the network of comments.

  On a Mac that you used to connect wirelessly in the past...

  Open System Preferences (gear on the dock icon)

  Open Network

  Click WiFi on the left panel to select

  Click Advanced in the bottom right of the next window

  Here you can see a list of networks that your Mac has signed in the past.

  Click on the name of a plu network that you no longer need to highlight

  Click on the - (button at the bottom of the list to remove the name less)

  Do the same for other networks that you no longer need

  Click OK

  Click apply in the next window that appears

  Close the windows and restart your Mac.

  Then, perform the same steps on all of your other Macs

  Turning off all routers AriPort

  Wait a minute

  Turn on the main airport and let it run for a minute

  Turn on other airports, one at a time about one minute apart

  Post back your results

• Any chance we can get confidence * WIFI networks?

  I like the feature to be on a Bluetooth device (in the car) and stas unlocked phone

  But what about when we are at home or at work, on a specific WIFI network? We might have this feature of this situation?

  I know that the bike will do things like reading the messages in 'at home', but this one is measured by GPS, funny, which is a little vague.

  Interesting idea - I guess the only problem I see is that it could be unpredictable

  -reliable bluetooth has a range of less - so trust is close to you. The object must also be involved, and there is more security because even 2 of the same BT objects require different pairings

  -Wifi has a range - you could curl upwards with a much larger radius of the unlocked device then you expect and someone could usurp wifi (same SSID and parameters) and possibly force an unlock when you do not expect.

  Not that someone could not force an unlock with BT if they got your BT device. Not that I'm against the idea - in fact, I like it. I would like to just to ensure that it was not less then ensure the authorized device BT