No HP devices have been detected. HP Solution Center will close now. HP 5610xi all-in-One

Similar Questions

• No HP devices have been detected. Solution Center will close now

  After you have reinstalled the software C3140 on my PC, I get the error of the message object. I am running Vista Home Basic on Dell E520.

  I uninstalled two three times. Completely cleaned all HP form the PC and reinstalled. Everything seems to load as Solution Center. When I try to open the centre Soluution I get subject error message.

  Grunt

  Hi PK,.

  Thank you for the update. We are always here to help the customer. Have a wonderful day.

• "No HP devices have been detected. Solution Center HP close now. »

  This is the message I get when I try to run HPSS my laptop which has Vista loaded.

  It has a wireless connection, but also other PC at home and they work very well, although they have XP and Windows 7.

  The printer is a C7180 which can print to without problems from the laptop, and I can scan with the web interface of the printer.

  I would like to be able to use the memory card as well.

  Any suggestions?

  Thank you...

  Have you read this?

• Solution Centre Message - NO HP DEVICES HAVE BEEN DETECTED

  XP Home Edition - reinstalled the series Officejet 6310 with updates. Seems to install correctly. Restarted the computer. Click the center of Solution and get the above message.  Verifying the settings/printers and faxes, I see the 6310 is my printer default and "ready". I also disconnected and reconnected the cables without success.  Help!

  For the ERROR: "NO HP DEVICE HAVE BEEN DETECTED.

  You can check this link

  http://support.HP.com/us-en/document/c00762521

  Make sure that you perform just like the path indicated in the link.

• NO HP devices have been detected, HP Centre will close now

  • HP Officejet 6310 All - in - One Printer (default printer) (HP Solution Center does not work)

  Serial number:

  {deleted personal information}

  Product number:

  Q8061A. Installed on the PC:

  HP Pavilion a6120n desktop PC

  Serial number:

  Product number:

  GC670AA

  HP w2207h LCD wide

  I followed all sorts of instructions given by HP, the problem persists:No. HP devices have been detected, HP Center will close now, this message any attempt activation of the HP solution Center icon or clicking the icon of imaging monitor digital HP works however the printer for printing and the scanner can be used to paint or windows photo gallery.

  Is there any possible solution to this problem, please notify

  Problem is solved.

  After posting this message, automatically updated HP up the software through authorized windows automatic update for HP on my PC (actually reinstalled the software with their own tools and appeared on start menu and not in C:\program\HP...), it's amazing, however, I wanted to know how HP has managed to solve the problem This will enrich my knowledge. ,

  Thanks for the help of HP

• "No HP devices have been detected.

  HP PhotoSmart C-4280 all-in-one

  Vista operating system

  error message: "no HP devices have been detected.

  My device will copy, but the unit is not detected when I call the HP Solution Center to scan.

  The device appears on the list of printers.

  If I try to print, the document appears to print that, but it will not be printed.

  I've uninstalled and reinstalled twice and I can't find the problem.

  Help me if you have any ideas.

  Thank you

  Hey Winston.

  You're the man, lol. I'm so sick of this HP 5280 I have Meg Whitman to eat. No one can figure out how to get the HP Solution Center to work. I wish someone could do a job so I could unload this puppy. HP just wants your money. They will not stand behind their products.

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

  Hi people,

  I searched many threads and found some tips to remedy this, tried and had no chance.

  I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

  Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

  I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

  What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

  Thank you

  Alex

   

  Screenshot of the update section:

  

  

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• hardware changes may not have been detected

  Hello

  I have an acer aspire laptop with win7 ultimate. recently, I could not use my usb ports and everything I plug could not be recognized.

  I installed Microsoft fix Center and the problem was solved. the usb driver is then downloaded and installed.

  same thing happened when I pluged in my mouse wireless usb, USB drive, external hard drive, printer, etc... I had to run the fix for windows download and install devices but it is this question on the "material changes could not have been detected.

  I remember that this process has been done automatically before each time that a device has been unplugged.

  I would like to know how to restore the default auto detect/download/install for any device that is plugged in.

  Thank you

  Hello

  Type services in the start search box, then press enter and search for windows install in the new window right click Sur-proprietes change startup type automatic.

  mohanad

• No Audio / noise coming from my speakers, get the message: "material changes may not have been detected." When I click the speaker icon to troubleshoot

  Recently, my son plugged his headphones Turtle Beach X 12 in the front USB and my computer's audio input. Since he took the helmet, I have had no audio of my Logitech speakers.  When I click the speaker icon to get out of trouble, I get this message: "material changes may not have been detected." When I go to my control panel to manage my audio devices, I get a message that says no audio device is installed. I tried the simple things like the removal and reinstallation of my speakers and tries a recovery to date before my son his headphones plugged the computer, but those who have not yet worked. I have to uninstall and reinstall my sound card?

  Hello

  Which could be necessary, but first, first try the software road. Try the steps in this tutorial and see if that solves the problem: http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• NO HP DEVICE HAVE BEEN DETEDTED all-in-one printer, HP Deskjet F380 range

  Dear HP

  I need help on this error NO HP DEVICES HAVE BEEN DETEDTED

  Range of all-in-one printers HP Deskjet F380

  # At the time of the opening of the HP solution center to

  NO HP DEVICES HAVE BEEN DETEDTED

  # windows xp pro with sp 2

  # a printer install on pc (network printer hp 3055)

  gigabyte g41 combo #.

  Respect of
  Kundan Shinde

  Follow the steps from the link below:

  http://support.HP.com/us-en/document/c02468684

• Yes, said "some files needed to accurately preview this page have been changed but not saved." Save now? "(Was: Question about possible...)"

  I said 'yes' to a box with a question that came

  ' Some files needed to accurately preview this page have been changed but not saved. Save now? "

  I had already experienced with the creation of text boxes (divs?) and what makes them different colors so I could see the difference, but now I managed to transform not only one, but ALL of my precious site pages in pink pandemonium - how can I fix it despite the fact that the coding is very well and does not correspond to what I have now on my pages... An example is attached...

  I have what looks like a bug, because it affects all pages.

  

  Sounds like the file that your linked css file save you when you are prompted. Only one css file that is linked to all pages would change all your web pages. You will then need to open that and then make the changes in this file in contrast to those that you saved by mistake.

  I suspect that you used the Panel css Design to make your css revisions in order to revert the changes through that and then save the css file.