"No HP devices have been detected.

Similar Questions

• NO HP devices have been detected, HP Centre will close now

  • HP Officejet 6310 All - in - One Printer (default printer) (HP Solution Center does not work)

  Serial number:

  {deleted personal information}

  Product number:

  Q8061A. Installed on the PC:

  HP Pavilion a6120n desktop PC

  Serial number:

  Product number:

  GC670AA

  HP w2207h LCD wide

  I followed all sorts of instructions given by HP, the problem persists:No. HP devices have been detected, HP Center will close now, this message any attempt activation of the HP solution Center icon or clicking the icon of imaging monitor digital HP works however the printer for printing and the scanner can be used to paint or windows photo gallery.

  Is there any possible solution to this problem, please notify

  Problem is solved.

  After posting this message, automatically updated HP up the software through authorized windows automatic update for HP on my PC (actually reinstalled the software with their own tools and appeared on start menu and not in C:\program\HP...), it's amazing, however, I wanted to know how HP has managed to solve the problem This will enrich my knowledge. ,

  Thanks for the help of HP

• Solution Centre Message - NO HP DEVICES HAVE BEEN DETECTED

  XP Home Edition - reinstalled the series Officejet 6310 with updates. Seems to install correctly. Restarted the computer. Click the center of Solution and get the above message.  Verifying the settings/printers and faxes, I see the 6310 is my printer default and "ready". I also disconnected and reconnected the cables without success.  Help!

  For the ERROR: "NO HP DEVICE HAVE BEEN DETECTED.

  You can check this link

  http://support.HP.com/us-en/document/c00762521

  Make sure that you perform just like the path indicated in the link.

• No HP devices have been detected. Solution Center will close now

  After you have reinstalled the software C3140 on my PC, I get the error of the message object. I am running Vista Home Basic on Dell E520.

  I uninstalled two three times. Completely cleaned all HP form the PC and reinstalled. Everything seems to load as Solution Center. When I try to open the centre Soluution I get subject error message.

  Grunt

  Hi PK,.

  Thank you for the update. We are always here to help the customer. Have a wonderful day.

• No HP devices have been detected. HP Solution Center will close now. HP 5610xi all-in-One

  I followed all the instructions without result.  I uninstalled the printer using Uninstall_L3.bat, reinstalled the printer using the download from the HP Web site.  The installation ends.  It goes through all the movements to the end where is is located at 96% for the longest and fairer farm.  Never, he finished the installation and so no HP devices.  I can scan using paint I can print documents.  The solution center is the only part not working do not and I need to be able to use the auto feed for scanning.  I can't scan using the buttons on the printer.

  What can I do now?  I am running Vista Home Preimiun, Service Pack 2 on an HP Pavilion Notebook dv9417cl.  It's frustrating.

  Well, there are ghosts or gremlins in the printer or the pc, or both.  I had worked on my PC earlier, put on standby for a coffee and when I woke up, it appeared a message for the installation of HP.  I clicked on continue and it has finished installing and everything works.  I am at a total loss about why, but I'm glad it works.  Thank you, Kyle.  Cherry

• "No HP devices have been detected. Solution Center HP close now. »

  This is the message I get when I try to run HPSS my laptop which has Vista loaded.

  It has a wireless connection, but also other PC at home and they work very well, although they have XP and Windows 7.

  The printer is a C7180 which can print to without problems from the laptop, and I can scan with the web interface of the printer.

  I would like to be able to use the memory card as well.

  Any suggestions?

  Thank you...

  Have you read this?

• hardware changes may not have been detected

  Hello

  I have an acer aspire laptop with win7 ultimate. recently, I could not use my usb ports and everything I plug could not be recognized.

  I installed Microsoft fix Center and the problem was solved. the usb driver is then downloaded and installed.

  same thing happened when I pluged in my mouse wireless usb, USB drive, external hard drive, printer, etc... I had to run the fix for windows download and install devices but it is this question on the "material changes could not have been detected.

  I remember that this process has been done automatically before each time that a device has been unplugged.

  I would like to know how to restore the default auto detect/download/install for any device that is plugged in.

  Thank you

  Hello

  Type services in the start search box, then press enter and search for windows install in the new window right click Sur-proprietes change startup type automatic.

  mohanad

• No Audio / noise coming from my speakers, get the message: "material changes may not have been detected." When I click the speaker icon to troubleshoot

  Recently, my son plugged his headphones Turtle Beach X 12 in the front USB and my computer's audio input. Since he took the helmet, I have had no audio of my Logitech speakers.  When I click the speaker icon to get out of trouble, I get this message: "material changes may not have been detected." When I go to my control panel to manage my audio devices, I get a message that says no audio device is installed. I tried the simple things like the removal and reinstallation of my speakers and tries a recovery to date before my son his headphones plugged the computer, but those who have not yet worked. I have to uninstall and reinstall my sound card?

  Hello

  Which could be necessary, but first, first try the software road. Try the steps in this tutorial and see if that solves the problem: http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• NO HP DEVICE HAVE BEEN DETEDTED all-in-one printer, HP Deskjet F380 range

  Dear HP

  I need help on this error NO HP DEVICES HAVE BEEN DETEDTED

  Range of all-in-one printers HP Deskjet F380

  # At the time of the opening of the HP solution center to

  NO HP DEVICES HAVE BEEN DETEDTED

  # windows xp pro with sp 2

  # a printer install on pc (network printer hp 3055)

  gigabyte g41 combo #.

  Respect of
  Kundan Shinde

  Follow the steps from the link below:

  http://support.HP.com/us-en/document/c02468684

• Lion broke Fusion - no boot device has been detected.

  Everything was wonderful until the Lion has eaten my Windows OS...

  I can start to Win 7 under Bootcamp without problem, but when I try to start windows 7 under the terms of the merger, I now get an error message that says no boot device has been found. Here is a screenshot. And Yes, I did uninstall/reinstall merger with the more recent version.

  Any help would be most appreciated.

  Thank you

  Brad

  This is a known issue because the installation of Mac OS X Lion modifies the partition table and all what you need to do is delete the Virtual Machine Boot Camp and add it to the back of the Virtual Machine library.

  Take a look at: VMware Fusion 3 support for Mac OS X Lion (10.7)

  • Boot Camp partitions is not accessible through Fusion after upgrade to Lion.

  To work around this problem, delete the virtual machine Boot Camp of the library and recreate it. For more information, see the virtual machine to Boot Camp fails to turn on with a disk (1003483) error.

• HL-Dt-St DVD RAM GSA - 4167 ATA Device driver problems.__Mitsumi - CR-48X5TE ATA drive has driver problems. Hardware changes may not have been detected

  I changed Windows XP to Windows 7 Home Version 3SP.  Both my DVD-Rom are not recognized by Windows.  A check in the Device Manager reports that both drivers are up-to-date.  I ran each anvenue in windows and the manufacturer's Web pages.  Now, I hope you can help?

  What can I do?

  Hi stoertebecker,.

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No supported device has been detected

  I have the first elements 14 running on Windows 10 PC.  I have a Canon Vixia HV30 connected via Firewire, which recognizes the operating system.   I had problems to download videos of this unit with 11 elements not, but I do not get one "no supported device found" when you use the video importer now that I updated to 14 items.

  FireWire support has been removed in version 13 and on.

  You can read more details and one had alternative suggested here:

  https://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• Operating system not found, no boot device has been detected but can run XP in Bootcamp without problem?

  The title says it all. I searched and tried the partial fixes to some of the questions.

  I have installed Bootcamp and a working copy of XP Pro works no problem at all.

  I installed VMFusion and merger goes to the partition, and I get the error no bootable devices and not found any BONES. It seems trying to boot from a network, it works to resolve a MAC address. Then he hangs on. Then don't say: "no found bone." I put the disc XP Prop and try reinstalling and it said: none found disk... I have attached a few photos.

  Thank you

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• The serial number is valid, but not the products concerned have been detected on this computer.

  I have a valid number for XI Acrobat pro

  The serial number is valid but no eligible products were detected on this computer.

  I have installed pro XI, but can be run it or list

  This means that you have a license to upgrade, and you need a DBA, a complete existing previous license to use it.