No internet connection after wipe system

Similar Questions

• I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

  Debbie

  How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

  How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

  What error messages are reported?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• Is VoIP a kind of internet connection what operating system using VoIP?

  Is VoIP a kind of internet connection what operating system using VoIP?

  VoIP means "Voice Over Internet Protocol". Have a read of this - https://en.wikipedia.org/wiki/Voice_over_IP for a little more in detail.

  Any OS with a proper application should be able to use it. Skype is a typical example, there are others.

• No Internet connection after system restore

  I had problems to open Windows Live Messenger last night, and I tried to do a system restore, as I noticed there were a couple of updates that have been installed throughout the day where I suspected may have caused the problem.

  I went back to a restore point from the earlier in the day when I heard that Messenger was working. Of course, Messenger open instead of crashing on startup.

  Unfortunately, I am able to connect to the Internet. Network connections settings say it's "id" my wireless network, but nothing changes. Is no longer, I get an IP address. I have other computers on the network that connect without problem.

  I tried to install a Wireless N USB adapter and the problem still remains. Finally, I gave and did a complete restore to factory settings. Good news is that I can now get a connection. Fortunately, I had my backup files.

  Research online, it seems that many people seem to have had similar problems, but not after a system restore.

• Internet lost connection after Vista system restore

  Hello

  I've lost the ability to connect to the internet after system restore.  I tried a few different dates, but have the same problem.  I have tried many of the rememdies on the forums, but now luck. I havn't seen all that is exactly what I'm going thru, so I thought that I have that would give a shot.

  The connection is through a wireless router.  No problem before the system restore (other than a virus major that I have my daughter!).  I have another computer I'm on now has been and still works fine.  I tried the following...

  Rounter unplugged for 5 minutes
  reset the network adapter
  reinstalled drivers
  several things through "command window" (do not remember so)
  I tried several dates on the system restore

  I'm so frustrated.

  I would be grateful to anyone who helps!

  Thank you
  Dave

  Hello

  1 you get an error message when trying to connect to the Internet?
  2. what web browser do you use? Is - Internet Explorer or a different browser?
  3. do you have any security software installed on the computer?

  Troubleshooting Internet connection problems can be a challenge because there are so many possible causes. First of all, try this step and check the result.

  Open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  For more information on troubleshooting Internet connection problems, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Post back with the results, so that we can help you further.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 17 e020us: no internet connection after upgrading to Windows 10

  Hello guys,.

  I have a problem with the internet connection.

  My computer started to upgrate by itself for 10 windows while I did other work at my home. I was waiting until he finished.

  When it's done I realized that I have no internet, not only my wireless, but each of them, because I have a free to use wireless

  So, I start google how can I correct this situation. I did all the tasks that windows offer, typed the commands at the prompt command, installed the drivers, typed commands for dns, deleted cookies, rebooted my computer after I have finished the task and my internet still doesn't work...

  In the browser window, I use chrome and internet explorer, it says:

  "This site is not reachable.

  YouTube.com address DNS server is not found.

  DNS_PROBE_FINISHED_BAD_CONFIG ".

  As I said I typed the commands at the command prompt to DNS and delete cookies and it did not work.

  Please, help me to solve this problem with my computer and the internet.

  I'll be very happy)

  I have an e020us windows, 64 GB, laptop HP Pavilion 17 10.

  Hello:

  There are W10 drivers for the wireless card that your laptop model.

  This is the latest available driver...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74843.exe

  If the wired network adapter is not no longer works, see if the ethernet W10 driver works for you...

  This package provides the driver for the Ethernet Realtek controller in portable models supported and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72934.exe

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Difficulty of internet connection after Security Tool Virus

  My mothers computer caught the security tool virus.  I finally had to reload Windows XP and Windows XP now works, but I can't connect wirelessly to the internet.  She got ahead through Linksys.  When I look under the modem it says connection cable to cable.  I'm assuming I erased the other information that I need to connect on the internet.  Any help will be appreciated.

  Here are some ideas of the fallout that occurs in your Internet settings after some infections have been deleted and how set things straight.

  Depending on how you removed the infection (the removal procedure is well documented), sometimes there are a few other things to do later.

  Some malware knows that you will try to get in the Internet to try to find a hair removal method if it adjusts things on your system to prevent you to do so.  Even if you delete the malware using several analytical tools, tools cannot tell if the Internet settings have been modified by malicious software or put you that on purpose so he leaves the only parameters (and your system cannot connect).

  The malware hope that you will not be able to understand these things and give up and just reinstall your XP, do an install repair or by using a Restore Point.  Sometimes it breaks these things too, but you can usually remedy without the use of one of these methds (which aren't really patches at all)...

  If you have reinstalled XP, this may not apply to your situation, but it would be a good start:

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically

  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window, and then type the following commands:

  ipconfig/release
  ipconfig / renew
  output

  Restart your computer and test your connection.

  If this does not work, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lose Internet connection after sleep/standby/hibernation Mode

  I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller.  Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.

  I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution.  I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no.  So far, I have:

  1. Reinstalled NIC driver.
  2. Power options controlled and reset with USB CDC.
  3. Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
  4. Reset the IP configuration via the Cmd line.
  5. Tab power, unchecked the box that shuts down the adapter then power save comes into play.

  Access the computer several times a day and having to reset Internet connections became extremely aggravating.  I hope there is a solution.  Thanks in advance for your help.

  Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation.  The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.

  After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."
  This seems to have cleared up the problem, at least until now...

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Apps to say no internet connection after 9.3

  After the upgrade to 9.3 different applications like hay day and yahoo weather, say I have no internet connection, but the internet is fine. My daughters works very well and does not say that, and we are on the same internet connection. It's never happened before. I was wondering if anyone else knows it after the upgrade or just me? Is there a solution? I know that's not my internet. I'm on an iPad 3

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then see if these apps work as it should.

  Sometimes, the network settings on an iOS device can be damaged during a update.

  If this does not help, delete the apps that are no internet connection then re download from the App Store.

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• No internet connection AFTER startup, but only works during the boot.

  Hi all

  Have a Win XP MCE (Media Center Edition) Dell laptop running.  I can only connect to internet when the system is even start, and I click on the shortcut to IE or Firefox. Once the system completes the startup it connects me to the internet WITHOUT problem & with good signal and good connection speeds.  System connect wirelessly through a Linksys router.

  If I left the initialization of the system ended up - and I'm trying to connect to IE or Firefox - the hourglass appears for a minute and then disappears and I get no connection!

  This means that I must always start the internet connection while system is always initialize, and if I end the connection I get only back to restart system in place and opening connection when appear the icons on the desktop for IE or Firefox!

  I am puzzled by this and have no idea what to do to solve the problem!
  TNX a lot!

  Cindy

  Hello

  • What were the changes made before the issue occur?

  Verify that if the problem exists in Mode safe mode with networking, if the computer works as expected in mode safe mode with networking, and then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.