No Internet connection (local only)

Similar Questions

• The Internet connects 'local only' after the regular updates?

  Hello

  My computer has installed its regular updates about a week ago and since then, the internet has had connection problems. It connects to the ordinary router, but it is "local only" and will not fully connect to the internet. The only solution I found to the problem is that my owner to restart the router, which is not the most convenient thing to do whenever I turn on my computer. I have windows vista with all standard Internet programs, and I use chrome. I also have a second windows computer that exposes the same problem, which is running windows 7, which has also installed updates. My roommate's computer is a Mac and is not at all account of all the problems.

  Hello kim90

  Have you tried to use system restore to before it started? If this isn't the case, then follow the steps listed in the link below. I hope this helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• New modem. HP laptop, wireless network, but not to the internet connection (local only)

  A wired connection works without problem. I try and wireless connection and it connects to the modem, but only on a "Local" basis only Other wireless devices connect without problem for example telephone, macbook. All solutions?

  Before doing the following, disconnect any WiFi network.

  Navigate to the following location:

  Control network and Internet\Network connections

  Right-click on the WLAN adapter you are using. Click on properties. On the Networking tab, look for Internet Protocol Version 4. Select it, and then click Properties. On the general tab, select the IP address automatically and DNS server automatically get an address. On the next tab, select automatic private IP address. Click Ok. Do the same for Internet Protocol Version 6 in addition, if you have. And then click Ok to close the Properties dialog box. Now try to connect.

  If the problem persists, answer here.

• Windows vista-internet connection is only local. Worked fine until Vista has been reloaded.

  Internet connection is only local. Worked fine until Vista has been reloaded.

  Choose the manufacturer of your computer in the list and get them from there.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• Internet connection is only Local (open wireless connection)

  Windows (VISTA HP SVP2) won't connect to my wireless - only local connection, but it is not a question HDWARE I am connected now on ubntu on a computer to dual boot. Why Windows can't see no internet?  It connects local only to a shared wireless hub
  

  tonight I resert the metwork adapter to automatically detect the IP4 and IP6 addresses.  This resolved immeidately SAT problem like ubuntu could connect, the modem does not need to be reset.  In connections in Vista on the Networking tab, you can select automatic detection.  MS help options that appear when you explain your diagnosis and repair

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Connection Internet says 'Local' only and I can't access the internet at my convenience.

  I'm not a computer genius, but I know that's not my wireless which is mess up and not allow me to access internet from my laptop.  If I try to access my home, or somewhere else that provides wireless internet, I always have trouble getting.  IF it connects, it shows 'Local' only and not allow me to access the internet.  It seems to do this when I am on the internet while someone else in my household is on it as well.  Which shouldn't be a problem at all.  I should be able to access the internet if someone else uses it or not.  Never had this problem until I got this new laptop with vista.  It lasts for almost a year now and I'm taking classes online and cannot deal with this problem any longer.  Please someone help me solve this ongoing problem that seems to be quite common!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• Unable to connect, 'Local only' for a few days now

  Approximately every 2 months home my computer Windows Vista unable to connect to my network.  I get the Local only and in the area of the network it is stuck on "identification" and will never stop.  I rebooted, reset the router and the modem, etc..   This usually lasts for days then it pops up right back on and it's fine.  Any ideas I can do if I don't have to wait days for it to reconnect?   Thank you.

  > Ken - Support Engineer: you can try another card network (wired) to this computer?
  I contacted my OEM. The Ethernet chip is based on the motherboard and cannot be replaced without replacing the motherboard.

  My OEM suggested to reinstall the drivers or a system restore before SP2 or wipe the laptop and re - install Windows.

  I tried reinstalling the drivers, nothing works. When I have more time, I am considering a system restore before SP2. If I wipe Windows I'll probably install XP Pro instead. I am completely sick of Blista.

  Another difference I found between Networking in Safe Mode and Normal Mode is the failure of the (spldr) security processor loader driver; It fails in the former mode, but is OK in this last mode. I sent the error report to Microsoft via the reports of problem and Solutions for your reading.

• my cable internet connection is only 10Mbps and won't go to 100 Mbps windows Vista premium edition

  My inter connection wire line or hard earth runs only at 10 Mbit/s and should be 100 Mbit/s running vista Home premium and and using realtek rtl8168C (P) / 8111C (P) FAMILY GIGABIT ETHERNET NIC (NDIS 6.0).  How can I solve this problem.

  Hello

  I'm not aware of any Internet service provider that offers a 100 Mbps connection.

  The speed of the Internet connection is not a function of your material, but by the contract you have with the provider.

• Computer internet connection drop (only configuring a connection)

  Good evening.  I am running Win7.  I have a modem/router Netgear connected with BT broadband and Ethernet connection between my computer and the router.

  When I switch off my computer for the night and resume the next day, the computer says that I have no network connection.  My wife's cell phone and the son can always access the internet via the wireless connection, and in all other respects, the network is functional.

  In order to restore the internet connection from my computer after power off, I have to reset the router.  Once this is done, the computer takes up his internet connection and network with all its cable systems and wireless connections continue to work perfectly.  In my view, that it is a software problem with the adapter to computer network, but beyond my ability to resolve.  Grateful for any help you can give.

  Go to Device Manager and uninstall your network card.  Restart the computer and it will reinstall it.

  If that does not resolve the problem, I suspect that your router has a problem.  I notice that you tell us that your router wireless works well, but your (and only you) wired is not.

  You can also try to change the cable, but it rarely makes a difference.  Try also using a different router port.

  Replacement is not big an investment and typically brings benefits, if you buy well.  A high price on a new router doesn't mean better.  Some of the costs down those are just as good.  The Dlink DIR L 605 is an example of a great router at a reasonable price.

• DV9000 laptop computer connection local only

  Under Windows XP. I seem to be connected but locally only. He says: "failed to query TCP/IP connection parameters. Cannot continue.

  I'm on AT & T DSL and theDesktop works well but the laptop connected to the same wireless router does not. I ran out of what to do. Thanks in advance.

  Jim

  Hello:

  From what you wrote, I see not listed wireless network card.

  NForce network controller is wired ethernet adapter.

  Your model series was suffering an epidemic of motherboards failed.

  Main points of failure were the video card and the Mini-PCIe connector to which the wireless adapter is connected.

  I suspect that the laptop's internal wireless capabilities are made for.

  The only alternative to a costly (and not recommended) replacement of the motherboard is to buy a good external USB wireless adapter.

  Paul

• Problems accessing internet, access "Local only" our network connection

  I have a Compaq laptop (bought in 2008) under Vista Home Premium.  Recently, I was unable to connect to the internet.  The connection to the router is successful, but it says Local access only.

  Frustration, I re-charge the full operating system today.  No difference, unfortunately.  (And, now that the summer is reset, I don't have the updates of Windows, etc..).

  I tried a few things on the internet but you had no chance.

  Suggestions are appreciated!

  Thank you

  Lynne

  Hi, Lynne:

  If your laptop is a model of Atheros AR5007 wireless card try this update of the driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&swItem=ob-108905-1&prodNameId=5060882&swEnvOID=4052&swLang=13&taskId=135&mode=3

• Internet connection with only a single cable to the ADSL PoRt ADSL in windows7

  Hi, sorry to ask this dumb questions

  It is possible to connect internet with only cable ADSL ISP in there.
  He got'in Port ADSL
  the operating system is windows7
  I already tried with checking the LAN settings in network and sharing Center
  but it does not solve my problem :(
  Please help me fast, the sooner the better :D

  Hello

  Thanks for posting your query in Microsoft Community and gives us the opportunity to help.

  Yes, you can connect to the internet using cable ADSL to ADSL Port in the Windows 7 operating system.

  See these articles for more information on the same:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

   

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Hope this information helps. For any other related Windows help, do not hesitate to contact us and we will be happy to help you.

• Internet connection going, only fixed by restarting?

  I recently had to reinstall Vista after it was trashed by one of its own updates and since then I had the problem I used to recover the past, months where every two days, the wireless internet stops working and a reboot seems to be the only thing he will get.  Y at - it an update or service pack or something I'm missing?

  Hello

  Try to update the driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.