NO INTERNET via the wireless or wired

Similar Questions

• I'm unable to access the Internet via the wireless or wired. Reinstall I tried all browsers and it still does not work.

  I can't go online with or without wire. I've uninstalled and reinstalled IE 7 and 8. And firefox installed. Still can't. Message reads page cannot be displayed. When I fix it cannot renew ip address

  Help

  original title: I can't go online with or without wire

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Renew the IP in the command prompt and check if the problem persists. Follow these steps to open the command prompt and type the command:

  a. click the Start button. Type cmd , and then click on OK.

  (b) to release the IP address type ipconfig/release and hit Efriendship.

  c. in order to renew the IP address type ipconfig/renew and press on Enter.

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/870702

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• How to connect to the internet via the wireless?

  I just bought my first laptop Toshiba L10, and I'm unable to start, how do I connect to the internet using the wireless feature and no track? More frustrating is how can I connect to the internet in the first place, wireless.
  Help, please.

  Hi Phil,

  To answer your questions in full, it would be quite a task but here is my simple guide: -.

  1. connect to the internet

  1.1 choose an ISP (provider of Internet Sertvice) and get a CD with the software and the connection information.

  1.2 load the CD and follow the onscreen instructions to set up your login information.

  1.3 If you use dial-up connect your cable modem to your laptop and the other end to your telephone line.

  1.4 If you are using broadband services to connect your CODEC to your USB port and the other cable to your microfilter attached to your telephone line.

  1.5 DO NOT START YOUR INTERNET CONNECTION UNLESS YOU HAVE ANTIVIRUS RUNNING ON YOUR LAPTOP.

  1.6 Click START-> CONNECT TO-> the connection created in 1.2 above

  For the wireless connection, the procedure is similar braodly but you need a router or wireless modem connected to your telephone line and properly configured in Notepad you.

  Follow step 1.5 with a lot of attention. If you connect to the internet without anit-virus software and firewall appropriate, it will be only a few seconds before your laptop computer will be infected with a form of virus. Please be careful.

  HTH

• Unable to connect to the internet via the wireless HP Pavilion DV2120us

  Recently, I did a new install of XP and updated all my drivers. It took me awhile, but I was able to correctly update all the drivers in Device Manager so that there are no more yellow question marks. But now I can't connect to wireless internet. I don't know if I need to install something that I did not already.

  H, Shannon:

  This is not good news...

  Your series of templates had motherboard problems and one of the problems is that the card mother overheating demolishes the video and takes the mini-PCIe port that feeds the wireless card.

  http://Forum.NotebookReview.com/HP-Pavilion-notebooks/233974-DV2000-dv6000-DV9000-recall.html

  Paul

• Connect to the internet via the wireless connection

  I recently did a system restore for my Sony Vaio running windows 7 but now is saying I have no internet connection when I tried Wizard, the Troubleshooting Wizard would not respond.i generally use Mozilla Firefox as my default browser.

  My Tablet & phone are the two works very well with my WiFi

  any help would be appreciated

  Thank you

  Hello Mark,

  You are welcome.

  And I am pleased that the proposed suggestion worked for you.

  In the future, if you have questions related to Windows, please do not hesitate to write us and we will be happy to help you.

  Thank you

• Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

  I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

  Any other suggestions?   Thank you

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for vista, win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How can I change my internet connection from wireless to wired

  Desktop HP Pavilion HPE h8-1017

  Windows 7 Home Premium 64 bit OS

  How can I change my internet connection from wireless to wired?

  Hello

  You already have a wired connection to your home? Very simple, just using a CAT5e or CAT6 cable and connect to a LAN port of the modem or router to port #2 (at the back) until you and your machine will:

  

  Kind regards.

• I work from home, how can I make Bittorrent via the wireless when I connect the ethernet to work

  Hi people,

  I know that the network connection with the lowest metric is chosen for the Internet, but it's killing Bittorrent as soon as I plug the ethernet cable.
  When I need to force traffice via the wireless I can use ' route add Pei *.» *. *. * mask etc. etc."but this only works for single IPs, such as streaming radio stations etc.   What I really need, is a sort of local proxy that I can specify in uTorrent, then use that IP to route via the wireless.
  Someone at - it ideas of how I could do this?  I read about SSH/socks etc. but it is a little confusing.
  See you soon... Buzz

  Hi Buzzcut50,

  I suggest that you contact the support of torrent of bits for more information.

  http://www.BitTorrent.com/help

• Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Hello

  This support of the wired network printer doesnot.

• I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this 'exception unknown software exception (0xc00000fd).

  Svchost.exe - application error

  I use windows xp professional edition. I connect to the internet via the modem broadband datacard. After 2 minutes, the tab displays like this
  "The exception unknown software exception (0xc00000fd) occurred in the application at location 0x5b8787ad.
  Click OK to terminate the program
  Click on CANCEL to debug the program.

  If I clicked on ok and cancel, it disconnects Internet. the message again after the computer restarts and the connection with the internet. and also the internet Explorer does not open I tried several times but it doesn't work. What can I do to slove this problem. Please help me.

  Hello

  ·          When the issue started?

  Step 1: Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

  Step 2: Check if the problem persists in Mode without failure.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Automatic, log in via the wireless network bridge

  The main router (provided by the ISP) which brings the Internet to my home is connected to a media player.  I have a USB adapter wireless (Linksys N Series) and an ADSL Modem / gateway (Linksys WGN Modem) connected to my PC.  I can't create a wired connection to my PC from the main router as its some 25 metres, and I don't want to shoot the son as long.

  I used USB wireless network adapter to connect to the router and was able to surf the net and a reasonable speed without a lot of data loss.

  I've also set up a wireless bridge on my PC (Vista Home Premium).  The network bridge is created by merging the connection to the local network (which is the ADSL modem) and the wireless connection.  Once I created the bridge, I was able to read files with the PC via the media player.

  The problem I have is every time, I stop the pc and reboot, the network bridge / connection is not started automatically.  I had to go and re - create the connection every time.  I don't understand why this is happeneing.  Is this due to weak signals received by the USB modem or another reason.  What is the solution?

  Is there a better way to set up my home network.  Any ideas / help would be very appreciated.  Thank you

  Hello

  He migtht be that the IP address is dynamic and changes each time.

  If you router has IP reservation use it, or to configure the static IP network devices.

  Jack MVP-networking. EZLAN.NET

• Unable to connect to the internet via the Time Capsule 2 TB router

  Hello

  I can't connect wireless to the internet using my Time Capsule (see 7.7.3 running).

  I mainly use a macbook air (so no ethernet jack) running El Capitan 10.12.2 but the problem also occurs with our iPad and iPhone.

  The system has worked for a few hours after the initial Setup, but our ISP crashed and I was not able to make it work since their entry online. I've used a Linksys router.

  ISP is done via a wireless connection. The provider can see my antenna and an Apple device connected to it. I have a static IP address with DNS assigned.

  My airport utility shows green for the network connection and the internet but no Web page will open.

  I did reset hard and reconfigurations a few times which one where I left the modem to the router cable disconnected until I got the full configuration.

  The wireless network is using DHCP with DNS assigned to a beach.

  Router mode is DHCP and NAT.

  Any ideas would be appreciated.

  There are a number of situations where the TC will simply not work.

  I have a static IP address with DNS assigned.

  If you have configured the Internet of TC tab with static IP address?

  Would it not be possible to get the address IP via dhcp... have you tried?

  Wireless modem is connected by ethernet to your TC? Also, the modem is a router that is bridged?

  I really need to see the numbers... but it's not good to put the public IP address here... xxx on the first two bytes and just give me the rest... as long as the IP and gateway are the same.

  Or send it to my email address. (see my profile).

  Your linksys might work, but the CT will not... This happens because Apple does not provide sufficient flexibility to allow the wireless Internet service provider. (Or Satellite or fiber or some ADSL).

  But it can also be a problem with the network... we have problems with the WAN port with some modems.

  Does the ethernet connectivity light come on, when you connect the modem to the WAN port on the TC?