No IOS app is created by using the App package manager?

Similar Questions

• Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

  Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

  Is it a registry problem or what? How can I fix?

  original title: PPPOE connection problem

  Hello

  1. you connect using a cable or DSL modem?

  2. did you ever get this working before that?

  3. are you connected to a domain?

  4 are you running Vista in a virtual environment?

  You doing appeared in this link to create the PPPOE connection:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

  Thank you

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• Can I download a Captivate course to connect AFTER incorporation of the animations of edge through the App package manager?

  I would like to include animations I've created along the animate and the App package manager, it's pretty easy. However, subsequently, I have a HTML course I can't download on Connect. When I ZIP it I am told by Connect it is an invalid format. Also, when I export a Captivate course as a course of HTML zipped, download it to establish a connection works, but the spinning loader shows indefinitely.

  So in case someone falls on this post with the same question, I discovered a way to sort of do that. I could not yet understand how to download the ZIP file to connect properly, but I could use the Interaction of Web object and load the HTML output to animate dashboard. It's just a folder with a bunch of files and an index file. Everything you do is choose the top-level folder, resize your interaction to fit, and all works well! No need to use the App Pakcager and animations can be inserted anywhere, anytime while you create your project.

• Can we use the same package for main and begotten of concurrent programs.

  Hello
  
  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1? If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?
  
  Thank you
  HC

  I use a package.procedure1 for a simultaneous program. Can I use the same package.procedure2 of a pondu simultaneous program which was called from package.procedure1?

  Yes you can.

  If I say incompatible as the same program of 1, which will create problems by running the 2nd program because the package is same?

  When you second the 2nd program it will not work if the 1st program execution, and he has to wait until you have completed the 1st program.

  Don't know what code you use in the first and second procedures or even in the whole, but you can try this in a TEST instance first and check whether or not it works as expected.

  Thank you
  Hussein

• Email scripts do not when using the UTL_TCP package

  Hi all
  
  I wrote a script to email using the UTL_TCP package.
  
  create or replace procedure pr_email (p_email_from in varchar2,
  p_email_to in varchar2,
  p_email_cc in varchar2,
  p_email_subject in varchar2,
  p_email_text in varchar2
  *) is *.
  
  l_conn utl_tcp.connection;
  
  l_result pls_integer;
  l_localhost varchar2 (100): = ' ora - drs.dryers.com';
  
  Start
  dbms_output.put_line ('Start: execution of ' |) "PR_EMAIL");
  l_conn: = utl_tcp.open_connection (l_localhost, 1523);
  dbms_output.put_line ('open Connection');
  l_result: = utl_tcp.write_line (l_conn, 'DRS HELO');
  dbms_output.put_line ('The L_RESULT' | l_result);
  
  dbms_output.put_line (' checking the connection ' |) UTL_TCP.get_line (l_conn, true, true)); _ + / * mkk * / *
  
  l_result: = utl_tcp.write_line (l_conn, l_localhost);
  l_result: = utl_tcp.write_line (l_conn, ' MAIL FROM: ' | ') p_email_from);
  l_result: = utl_tcp.write_line (l_conn, ' RCPT TO: ' | ') p_email_to);
  
  l_result: = utl_tcp.write_line (l_conn, ' RCPT TO: ' | ') p_email_cc);
  dbms_output.put_line ('The L_RESULT' | l_result);
  l_result: = utl_tcp.write_line (l_conn, 'DATA');
  l_result: = utl_tcp.write_line (l_conn,
  *'Date: ' | *
  TO_CHAR (sysdate, ' dd my yy hh24:mi:ss'));)
  l_result: = utl_tcp.write_line (l_conn,
  *' De : ' || p_email_from | ' <' || *
  p_email_from | ') ;
  l_result: = utl_tcp.write_line (l_conn, "MIME-Version: 1.0 '");
  l_result: = utl_tcp.write_line (l_conn,
  *'To: ' || p_email_to | ' <' || *
  p_email_to | ') ;
  
  --*
  l_result: = utl_tcp.write_line (l_conn,
  *'Cc: ' || p_email_cc | ' <' || *
  p_email_cc | ') ;
  --*
  l_result: = utl_tcp.write_line (l_conn, ' subject: ' | p_email_subject);
  l_result: = utl_tcp.write_line (l_conn, ' Content-Type: text/plain "");
  l_result: = utl_tcp.write_line(l_conn, '');
  l_result: = utl_tcp.write_line (l_conn, p_email_text);
  l_result: = utl_tcp.write_line(l_conn, '');
  l_result: = utl_tcp.write_line(l_conn, '');
  l_result: = utl_tcp.write_line (l_conn, '.');
  l_result: = utl_tcp.write_line (l_conn, 'QUIT');
  UTL_TCP.close_connection (l_conn);
  dbms_output.put_line ("' closed connection");
  
  dbms_output.put_line ('End: execution of ' |) "PR_EMAIL");
  
  end pr_email;
  
  
  When I'm the enforcement procedure
  pr_email exec ('[email protected]', '[email protected]', '[email protected]', 'Test', 'Test');
  It's a failure to comment . MKK.
  
  I get an error message:
  ORA-29259: end-of-input reached
  ORA-06512: at "SYS." UTL_TCP", line 127
  ORA-06512: at "SYS." UTL_TCP", line 321
  ORA-06512: at "SYS." UTL_TCP", line 391
  ORA-06512: at "DRS_MGR. PR_EMAIL", line 20
  ORA-06512: at line 1
  
  
  When I comment the code dbms_output.put_line (' checking the connection ' |) UTL_TCP.get_line (l_conn, true, true)); + / * mkk * / _
  and run the procedure, I get no error, but I do not receive the mail.
  
  FOR INFO:
  The hostname and PortNumber I got from our Listner.ora file to our database.
  
  
  Let me know I do everything wrong here.
  
  Appreciate your help.
  
  Thank you
  Madhu K.

  UTL_MAIL is the new package to send mail from PL/SQL. UTL_SMTP was the package to do before 10.1.

  Normally, you would ask the administrator of the mail server if they are really running the SMTP server on a very unusual port on that server. Except that you can manually telnet to the server specified on the specified port, type "HELO" and see what was the answer. If there's nothing listening on the port, the telnet session fails. If there is an SMTP server listens on this port, it must respond to the HELO command.

  Justin

• I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.

  Update Code error 80070490

  There, I had a update failed on Windows Vista Service Pack 2 (KB948465).  I tried the Mr. fix it, but the execution software failed.  Some time later, I'm now at the point where all of the updates fail and gives me the error code 80070490.  I tried the system tool - didn't work.  My computer is preinstalled with vista home premium, so I have no disks.  I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.  Choose 'The essential system updates for Microsoft Vista SP 1'?  If so, he wants that I uninstall first.  How can I do this?

  Hello

  For any questions about the HP recovery process, contact HP.

  Here is their Web site about this link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  This is the Microsoft Information about your error code 0 x 80070490

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  To make the Installation of repair upgrade in the Microsoft link, borrow Microsoft Vista DVD a friend.

  Here is the information on how to do it:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Stuck at 87% download Acrobat Standard DC 2015 using the arvato Download Manager.

  I'm stuck at 87% downloading Acrobat Standard DC 2015 using the arvato Download Manager. Once it hits 87% it hanged, then will launch at 0%. Is there a direct link, that I can use?

  If you have a retail serial key, use this link - https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Choose Acrobat Standard DC (Classic)

  If you use subscriptions, or if your organization has purchased Acrobat DC license via program ETLA or VIP, you can download the installer from this page click on the link - https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html

  Choose Acrobat Standard DC (continuous)

• Can I add watermarks to PDF files using the PDF package?

  Can I add watermarks to PDF files using the PDF package?

  Hi Susannah,

  Adobe PDF Pack does not allow to edit a PDF file. To do this, you would need Acrobat. We invite you to try Acrobat free for 30 days: see http://www.adobe.com/products/acrobat.html for more information.

  This help document describes how to watermark a PDF in Acrobat: add watermarks to PDF

  Best,

  Sara

• How do you download InDesign using the Adobe Download Manager?

  How do you download InDesign using the Adobe Download Manager?

  With Adobe Download Wizard installed, you should be able to start the download at http://www.adobe.com/cfusion/tdrc/index.cfm?product=indesign.  If this doesn't work for you then please try another browser.

• Cannot see data in excel after using the export_excel package

  After using the export_excel package of some cells in the display worksheet "#". If the cell is selected displays the data, but it disappears when you exit the cell and try to print it. Anyone know what causes this problem?
  
  Thank you

  Hello

  From the following link, the maximum width of a column in Excel 2000 is 255 characters: http://support.microsoft.com/kb/264626

  So, it seems that you may need to be upgraded, divide the cell into 2 or more cells, or add in a few line breaks?

  Andy

• iOS device is prompting to use the microphone?

  I submitted an app for Apple and he rejected for the following reason: "During the review, we have been asked to provide consent to use the microphone, however, we were not able to find features or features that use the microphone for recording audio."

  Apparently, my application requires the device to use the microphone. However, I did program a feature that uses the microphone.

  My application only if, have sound, however, does not have programmed in microphone features. This question has never happed before and may be the case on iOS devices 7.

  Does anyone know how to fix this?

  Known bug in iOS 7:

  https://BugBase.Adobe.com/index.cfm?event=bug&ID=3609631

  Fixed in the latest AIR SDK, please update:

  http://helpx.Adobe.com/en/Flash-Player/release-note/fp_118_air_38_release_notes.html

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• insufficient privileges when you create sequence using the procedure

  CREATE OR REPLACE PROCEDURE schema1.proc1 AS
  BEGIN
  EXECUTE IMMEDIATE 'DROP SEQUENCE schema1.add_ins_seq';
  EXECUTE IMMEDIATE 'CREATE SEQUENCE schema1.add_ins_seq MINVALUE 1 MAXVALUE 999999999999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 1000 NOORDER  NOCYCLE';
  END;
  

  This procedure is created to schema1 by schema1.

  Schema1 boasts a CREATE SEQUENCE privilege.

  When I run this procedure through SQL Developer after the Cup to schema1, the error is thrown in insufficient privilege to CREATE SEQUENCE, however, DROP SEQUENCE is executed. I can create the sequence without the procedure call.

  If I add AUTHID CURRENT_USER so I don't get the error of insufficient privileges.

  Why it gives this error when the owner and the applicant of the procedure is schema1?

  Hello

  1st thing to know: when a procedure is defined (and updated), any privileges granted through ROLE is not taken into account. This is because these privileges can be active or not at the level of the session (as happens if for example a user has active 'role A' in session 1 but not in session 2 and if this role has been used to define a procedure?) The proecedure must at the same time be VALID in session 1 and INVALID session 2? Is not possible.

  Thus, for instance in a situation of 'standard': user SYSTEM has 'DBA Rôle', so you can for example make a sqlplus session "SELECT * v $ instance;", but you would write a procedure owned by system making instance_name SELECT INTO l_variable OF v$ instance;  "then"surprise": the procedure cannot be compiled because of the ORA-904 Table or view does not exist..." To be able to create the procedure, a DSS system needs to be done.

  2nd thing for your special case, a little more complex: default for a procedure is 'AUTHID DEFINE', but once more: it means "privileges of the author creating the procedure", so without taking into account the acquired privileges through roles... Your user name is 'sequence create' through a role, it cannot use the privilege within the procedure.  But... but when you define the procedure with AUTHID CURRENT_USER, privileges are evaluated at run time, and thanks to the active ROLE in the session by calling the procedure, at this time, the user can create the sequence.  If try again you but with 'The VALUE NONE ROLE' in the session before the call, you will again have the question.

  Conclusion: If you need to do the action, you must grant the user the necessary privilege directly.

  Best regards

  Bruno Vroman.

• created by using the default tablespace "SYSAUX' table

  Hi all
  
  I am a newbie of semantic technology from oracle. I have a question that I do not understand why the "articles_rdf_data" table is not under the created tablespace "rdf_tblspace", but in the default tablespace "SYSAUX? I created a table space named articles_rdf_data and a network of semantic data using this tablespace. After I created the table "articles_rdf_data" and a semantic model 'items' which uses the created tablespace, and then I logged in the OEM to check it out, I found that this table uses the default tablespace "SYSAUX" rather than created tablespace which I thought that it should use. Thanks in advance.
  
  Kind regards
  Hong

  Salvation Hong,

  When you created your table in the application "articles_rdf_data" have you set the tablespace?
  for example
  SQL > create table xyz (i int) tablespace rdf_tblspace;

  If you don't explicitly set, you must change the default behavior of the user of the session
  tablespace. Assume that your user session is scott

  SQL > ALTER USER scott TABLESPACE DEFAULT rdf_tblspace;

  Thank you

  Zhe