NO job. Puzzle time

Similar Questions

• WHY JOBS FIVE TIMES LARGER WHEN OPEN?

  WHY JOBS FIVE TIMES LARGER WHEN OPEN? Closed printing 3Mo contest; 20.6 mg open, with the size of the document of 8 x 10 to 300 dpi.

  My sister 'amateur' digitized pictures on Epson 4490 and sent... 35 to 50 KB each. I complained that these stamps must be analyzed on larger size once again.

  She says, open them in PS. Today, there are 600 kb 3x3@300dpi.  I '"the professional almost' feel like a fool. What is the truth. Thank you 1 million of your time & entry. Carol Ann Dwyer.

  I was curious myself, I did a little research. I normally do not hand off files to others, so this isn't a problem, but if this question comes up again I can explain it.

  Here is the difference:

  «For the sake of simplicity, let's just deal with the final image after turning, he converted and do any cropping.» This image, opening in Photoshop, has a size of file 'open' or 'work', as seen in the section control panel size Image above. However, when you come to save the final image, you will need to decide about the compression of files.  Generally you will be save the image in TIFF format, which may have a compression or not at all, or as a JPEG file, which will always be compression.  If the image has been saved with the downsizing, you notice that the backup image has a file size much smaller than what it was when it was opened.  Think of this as 'saved' or 'compressed' file size.

  The problem comes when you look at an image that has been stored on your hard drive and you must decide what the 'open' or 'work' of the file size is the size of the 'open' file that account when you send an image to a client. »

  You open the file and look in the box about the size of the Image to see open size or work.

  

• Photosmart All In One 209: Don't delete no print jobs every time I print

  Printer will not remove jobs from queue whenever I print. I reset printer queue and delete the printer files. Print the next time he does it again. Uninstalled and reinstalled the drivers. Check the setting for automatic winding and has been correctly defined. Don't know what to try next.

  Thank you - Sagedog

  Hi @SAGEDOG,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. I came across your post and wanted to help.

  Then start the document of support for the HP printers - Print Jobs stuck in the queue (Windows)

  If the problem persists, I suggest that you remove the drivers and then reinstall the full features software.

  Please follow the steps to remove the drivers:

  Press the Windows key + X->, click on Control Panel-> in the upper right corner, under the chosen category notice-> click on hardware and sound-> device and printers-> select the printer-> on the top of the page, click on the print server properties-> click the tab drivers-> installed slot - select one by one and then delete everything--printer drivers click on apply and then click OK.

  Restart the PC and then install the driver software complete features from disk or from the Web site, using this link.

  I hope this helps. Let me know if you need additional assistance.

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
   
  Kind regards

• His stats EPSON WF - 2540 Series Job will not stop printing

  Printer EPSON WF-2540 Series - 60B 384 =

  OS = Windows 8 Blue 6.3.9600

  Driver HP series class driver is;. version 63.1303.3.00

  Problem:

  In the process of printing a form (PDF) from the internet the printer began to print attributes task rather than the content of the form and it does not block the stats to print again and again.  I removed the device and reinstalled.  I turned the printer and unplugged.  I have reset the default printer.  There are no jobs in the spooler.  If we create a print job with the printer off we get this printed work and then the stats for internet PDF starts printing.

  EXAMPLE OF STATS in EMPLOYMENT from line 1

  12345X@PJL set stringcodeset = UTF8

  @PJL COMMENT = "" job start time: Sun Oct 05 14:11:02:658 2014 ""

  @PJL JOB NAME = "460int".

  These work instructions continue for a third of a page, while the rest is filled with a repeated sequence of "0W0V".

  Any help is appreciated.  TKS

  Thanks for the reply.  With my wifes computer is turned off, I accessed my office printer and the printer performed as intended.  When I turned on the laptop, the problem as described in the report began.  This has isolated the problem to his computer.  I've stopped and started the spooler service and the problem continues.  Finally, I find the spooler files in C:/windows/system32/spool/printers and erased.  My wife has printed several docs now and the problem seems to be resolved.

  Thanks again for your attention.

• How to strengthen the failure on jobs of the Disqualification

  We execute the Disqualification autosys scheduler jobs (ksh shell script called CLI command) and have the following conditions:

  1. do not the autosys job each time that there is a problem in the execution of the task of the Disqualification (i.e. the Disqualification job failed because of blocking problem)

  2. do not work autosys whenever at least a save fails in the processor business rules

  Currently, the shell script returns a 0 return code (success) on both scenarios.

  Can you advice how Disqualification jobs can be configured to trigger failure to the caller?

  Yes the bug has been checked on 12.2.1. It is the version, and not specific o/s. The bug does not exist in previous versions. We are working on a fix for the fix.

• request on inactivating a job dbms_refresh

  Hi all
  We have a 11.2.0.2 base of windows that is running on a Win 2008R2. I feel bad how to kill two jobs in double that is activated in auto & is created automatically, even after using dbms_refresh.destroy. These red refresh the MView jobs every time.
  
  . Need your expert advice how to permanently kill these jobs. Please notify.
  
  Kind regards
  
  Work, WHICH
  -------- ------------------------------------------------------------
  4418 dbms_refresh.refresh ('"NSG71".) "SUCCESSFUL_SUB20121108" ');
  4419 dbms_refresh.refresh ('"NSG71".) "SUCCESSFUL_SUBMISSIONS" ');
  
  
  SQL > SELECT refname, refowner, ref_child FROM sys.ku$ _refgroup_view;
  
  REFNAME REFOWNER REF_CHILD (REFGROUP, REF_ADD_USER, REF_ADD_DBA)
  ------------------------------ --------------------------------------------------------------------------------------------------------------
  
  
  SUCCESSFUL_SUBMISSIONS NSG71 KU$ _ADD_SNAP_LIST_T (KU$ _ADD_SNAP_T (3944, ' dbms_refresh.add (name = > "'NSG71'.))) «"SUCCESSFUL_SUBMISSIONS" ", list = >" ' NSG71 '.»» (SUCCESSFUL_SUBMISSIONS"" siteid = > 0, export_db = > "DEVNSG"); ',' sys.dbms_irefresh.add (name = > "'NSG71'.) «"SUCCESSFUL_SUBMISSIONS" ", item = >" ' NSG71 '.»» SUCCESSFUL_SUBMISSIONS"" siteid = > 0, export_db = > 'DEVNSG'
  
  ');'))

  Normally you would when you create your mview as part of the CREATE MATERIALIZED VIEW of [url http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_6002.htm#i2116443] statement.
  When you want a mview which refreshes periodically, you use the UPDATE... START BY... NEXT... a part of the statement.
  When you want a mview who don't not refresh unless you tell her, you use the UPDATE... WE ASK... the part of the statement.

  When you need to change this after the fact, you have the statement ALTER MATERIALIZED VIEW [url http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_2002.htm#i2233205].
  With that statement, you can change the mview to REFRESH on DEMAND.

  Do not forget that when the value of ON DEMAND, the mview refreshes never by itself, only when do you explicitly by calling the dbms_refresh.refresh or dbms_mview.refresh.
  If you want a periodically refreshed mview but simply not hourly, you might also consider changing the formula NEXT to your mview get updated only once every night, rather than once per hour.

  (I mean, someone has created your mview to update every hour - then perhaps that someone is waiting for it to refresh periodically ;-)))

  Read the examples in the links above. [Url http://docs.oracle.com/cd/E11882_01/server.112/e10706/repmview.htm#i31171] Advanced Replication guide explains also on different types of discount mviews.

• Message error "arrested -"filter"has failed."

  After upgrading to Mac OS Sierra, when you attempt to send a test print my Epson Stylus Photo 2200, I get the message error "stop -"filter"failure" in my print queue.

  

  I have left clicked on the printer-> error log menu item, and I have the following in the error log.

  E [27/Sep / 2016:10:04:40-0500] [Job 3] Job is stopped due to errors in filter; For more details, see the error_log file.

  D [27/Sep / 2016:10:04:40-0500] [Job [3] the following messages have been saved since 10:04:38 to 10:04:40

  D [27/Sep / 2016:10:04:40-0500] banner of start-up [Job 3] adding page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] queued on the "EPSON_Stylus_Photo_2200" by "derekberube".

  D [27/Sep / 2016:10:04:40-0500] file [Job 3] seized automatic...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] request file type is application / vnd.cups - banner.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] file of type application / vnd.cups - banner in queue 'derekberube '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end banner add page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] time to processing = 1474988678

  D [27/Sep / 2016:10:04:40-0500] [Job 3] 3 filters for task:

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgbannertopdf (application / vnd.cups - banner to application/pdf, cost 33)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster (application/pdf in the application / vnd.cups - raster, cost 100)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (application / vnd.cups - raster to printer/EPSON_Stylus_Photo_2200, 0 cost)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] job-sheets = none, none

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [0] = "EPSON_Stylus_Photo_2200".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [1] = '3 '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [2] = "derekberube".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [3] = "testprint.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [4] = "1".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [5] = "AP_ColorMatchingMode = AP_VendorColorMatching AP_D_InputSlot = nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName = testprint com.apple.print.PrinterInfo.PMColorDeviceID... n. = 23775 com.apple.print.PrintSettings.PMCopies... n = 1 com.apple.print.PrintSettings.PMCopyCollate... b. com.apple.print.PrintSettings.PMFirstPage... n = 1 com.apple.print.PrintSettings.PMLastPage... n = 2147483647 com.apple.print.PrintSettings.PMPageRange... a.0... n = 1 com.apple.print.PrintSettings.PMPageRange... a.1... n. = 2147483647 fit-to-page media = letter requested by pserrorhandler = standard job-uuid=urn:uuid:8781dff0-21e9-31ef-5b09-534d193452be job-originating-name of host = localhost to-date-time-create = date-time-to-processing = time-to-creation" time processing 1474988678 = 1474988678 = document-name-supplied testprint PageSize = letter»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [6] = "/ private/var/spool/cups/d00003-001.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [0] = "< CFProcessPath >".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [1] = "CUPS_CACHEDIR = / private/var/spool/cups/cache '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [2] = "CUPS_DATADIR = / usr/share/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [3] = "CUPS_DOCROOT = / usr/share/doc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [4] = "CUPS_FONTPATH = / usr/share/cups/fonts.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [5] = "CUPS_REQUESTROOT = / private/var/spool/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [6] = "CUPS_SERVERBIN = / usr/libexec/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [7] = "CUPS_SERVERROOT = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [8] = "CUPS_STATEDIR = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [9] = "HOST = / private/var/spool/cups/tmp".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [10] = "" PATH = / usr/libexec/cups/filter: / usr/bin: / usr/sbin: / bin: / usr/bin ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [11] = "[email protected]".

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[12]="SOFTWARE=CUPS/2.2.0 ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [13] = ' TMPDIR = / private/var/spool/cups/tmp ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [14] = "USER = root"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [15] = "CUPS_MAX_MESSAGE = 2047"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [16] = ' CUPS_SERVER = / private/var/run/cupsd.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [17] = "CUPS_ENCRYPTION = IfRequested"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [18] = 'IPP_PORT = 631'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [19] = "CHARSET = utf-8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [20] = "LANG = fr_FR. UTF - 8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [21] = "APPLE_LANGUAGE = en - en"

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[22]="PPD=/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [23] = "RIP_MAX_CACHE = 128 m"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [24] = "' CONTENT_TYPE = application / vnd.cups - banner" "

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [25] = "DEVICE_URI = 0 usb://EPSON/Stylus%20Photo%202200?serial=L5602021107061925"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [26] = "PRINTER_INFO = EPSON Stylus Photo 2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [27] = "PRINTER_LOCATION = MacBook Pro Derek Berube\"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [28] = "PRINTER is EPSON_Stylus_Photo_2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [29] = "PRINTER_STATE_REASONS = none"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [30] = "CUPS_FILETYPE = document"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [31] = "" FINAL_CONTENT_TYPE = vnd.cups - raster/application ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [32] = "AUTH_I."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgbannertopdf (PID 2075)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 2076)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgpdftoraster (PID 2077)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 2078)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started backend/usr/libexec/cups/backend/usb (PID 2079)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] Message catalog filename is \"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framework s/PrintCore.framework/Versions/A/Resources/English.lproj/cups_apple.strings\.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_banner(filename=\"/private/var/spool/cups/d00003-001\")

  D [27/Sep / 2016:10:04:40-0500] [Job 3] usb: AppleLanguages =-"en - US\".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + connection-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] looking for \'EPSON Stylus Photo 2200\'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] open connection

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2078 (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) was arrested with the 206 State (output Interface queue is full)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Tip: try to set the LogLevel "debug" to learn more.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Page = 612 x 792; 9.40 at 603-783

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin ' permissions OK (040755/uid = 0/gid = 80).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / System/Library/Printers/Libraries/USBGenericPrintingClass.plugin ' permissions OK (040755/uid = 0/gid = 0).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0 x 00000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin) (kr:0 x 00000000)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: copy to temp \"/private/var/spool/cups/tmp/0081d57f93b5a\ print file '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE:-connecting-to-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sending data to the printer.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sent 0 bytes...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + cups-wait-for-work-over

  D [27/Sep / 2016:10:04:40-0500] [Job 3] align for banner 1.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2075 (/ usr/libexec/cups/filter/cgbannertopdf) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2076 (/Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdf topdf2) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: \"/private/var/spool/cups/tmp/0081d57f93b5a\"has 1 pages.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: open \"/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd\ file PPD «...»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: PreferredRotation = - 90

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsPageSize = [612 792], cupsImagingBBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width = 612, length = 792, high = 9, low = 40, left = 9, right = 9

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970, cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: colorspace = 1, bitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: the seller matching mode is turned on and the requested transfer color space is sRGB.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: skipBytesPerRow = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bandwidth = 2970, bytesPerRow = 11888, band height = 3715, height = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width of the frame = 2970, height = 3715 bitsPerComponent is 8, bitsPerPixel = 32 bytesPerRow = 11888, bitmapInfo = 5, resolution = (360.000000, 360.000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] HWResolution = [360 360]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] ImagingBoundingBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] margins = [9-40]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PageSize = [612 792]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerPixel = 24

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBytesPerLine = 8910

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: rasterWriteHeader: unable to write the header streams raster: Broken pipe

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bytes written for the side 1 = 0, err = 5

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2077 (/ usr/libexec/cups/filter/cgpdftoraster) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] waiting for read thread exits...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2079 (/ usr/libexec/cups/backend/usb) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end of messages

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer - state = 3 (idle)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer-State-message = "Sending data to printer."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] - printer-motivation = none

  Line 66 # in the above seems to indicate the rastertoescpII utility failed with a status code of 256 and the error message "output Interface queue is full.

  Troubleshooting steps

  To try to solve this problem, I followed the steps described in the article «problems of printer on your Mac»  I have reset the printing system and it does not work.  I have also unplugged the printer, deleted the contents of the folder/library/printers/and then plugged the printer into.

  You will need to check with Epson to see if there is a new driver for your device compatible with macOS Sierra. The old drivers are not compatible. Even with the new driver, some people state that the error is not fixed :-( YMMV.

• Automatic response to stop customers message

  Hello. I am owner of a salon and I have a cell phone to plan my clients. I am very esaished and very busy and be a receptionist full time became a job full time. People are texting all hours of the day then with clients and the nights and weekends. I am setting up and online booking program and looks a lot on my phone to reply to all messages text about my personal planning hours and the booking link online. I can't find something there that auto responds to messages. Is this something I can do?

  For Verizon users.

  1. In the home screen, press the Messages VZ app.
     To locate the application, it may be necessary to finger swipe left or right on the home screen.
  2. Press the Settings icon (located at the top left).
  3. Press auto-answer.
  4. Choose one of the following:

  Activate the automatic answer

  1. Type a response message.
  2. To edit a message:
     1. Press Edit next to the message to change.
     2. Enter in a new message, and then tap Save.
  3. Change the date Until then press the star

• Generate the name of photo file photo title - can I do with an automated procedure.

  I imported into pictures of thousands of old pictures with long, descriptive file names.  The problem is that the metadata for the title remains empty for all the imported photos.  I want set title for each photo to its file name.  I've been going through photos and copy the file name to the title on a basis of photo by photo, but I simply have too many images to pass through them without making my job full time.

  Is it possible to automate the assignment of file name for title in situations where the title is empty?  Is it possible to ask for the title to be considered file during the import process name?  (Apple: if not, why?)  Can I write a script to assign the title of file name?

  Thanks for any idea that you can offer.

  There are user scripts to do this

  Script: Change the title filename without Extension

  Script: Batch change the titles to the w/Extension

  and old toad has compiled some of these applications

  http://www.oldtoadstutorials.NET/no.P01.html

  LN

• Dn laserjet P2055: installation P2055dn

  Why it's almost impossible to keep one of these printers connected and working.  I have one I am trying to install on a new computer.

  Says 1) that the computer has no USB support. ; (2) I need to be an administrator; (3) I have the wrong operating system.

  I downloaded the drivers HP for Win 7-64 bit., I get an icon in devices and printers, has the green check mark it, but do not print.  For several days, I've deleted and reinstalled more than 75 times with almost as many re - start.

  Most of my 40 workstations are Dells (i5, or better, all Win 7 pro 64-bit), it's a new motherboard from Gigabyte.  I have the same questions about all 40 PC, it has become a job full time keep connected HP printers.

  Is there a solution relaiable there to get and keep these printers connected to a Win 7 Pro 64 bit workstation?

  I found a solution.

  1. Unplug the USB cable from the computer 2055.
  2. In devices and printers, delete the printers installed when the printer was connected usb.
  3. For good measure, I also ran CCleaner as well on temporary files and function cleaner reg.
  4. Download the full package and run the 'set-up '.
  5. After that the installation décompacte files, cancel it.
  6. Search for drive c: for usbready.exe and once found, rename for the installation program cannot be found.
  7. In the folder where "usbready.exe" has been located, run the set-up file once again, but this time he let continue, do not cancel the installation.

  After days of testing in several other ways to connect to this printer, it was the only method that worked.  I tried this method several times and it works, it is the ONLY method that works for me to install the printer P2055dn.

  I have several of this particular model printer, it's always a challenge connected Dungeon and work, at least once a week, someone in our Office will ask me re - connect their 2055 printer and it's the same procedure to uninstall and reinstall.  Other than keep connected, they are proved to be a decent printer. Only 3 out of more than 25 have developed electronic related failures and stopped working in the last years of ±3.

  Bottom line is that the software and drivers for the connection USB is bug, use of HP to ensure that these problems have been resolved, not so much anymore...

• What Macbook should I buy AutoCAD?

  Hello!

  I just want to ask, what macbook should I buy AutoCAD? I plan to buy the Macbook Air w / core i5 but I saw in some discussions that it is not recommended for autocad... is this true?

  BTW... I am a student in engineering, and I'll use it at school it's why I do not prefer the Macbook Pro because it's big, bulky and heavy. I want the Macbook Air because it's elegant, light and it fits into my bag. And also I need the cheapest possible that's why I prefer really the model of Air. (because I'm just a student and my savings from my job part-time is not big so my budget is tight and only around $ 400-600)

  I need it after this break.

  Thank you! Prospects for a helpful answer.

  I'm not familiar with the application, but I suggest that you contact the school and get recommendations from them for minimum requirements as well as the developer of the software.

  Ciao.

• New monitor S2031 incompatible with new Pavilion P7 - 1108P?

  I recently bought a Pavilion P7 - 1108P with Windows 7 (64) for use with an HP S2031 LCD monitor 9 for my accountant home based business. The Pavilion has an AMD A4 - 3400 APU with Radeon HD graphics card. There is no VGA port at the back of the computer, only two DVI - D ports. I connected the new monitor to the new computer with the single-link DVI cable supplied with the equipment. My problem is with the display; It is huge and pixelated and won't work with the accounting software I need to use. On the page of screen resolution, the display is listed as 1. Monitor Non - Generic PnP "with no other options available, and the resolution is set to 640 x 480 and disabled with no other option." I tried to install the drivers on the CD supplied with the monitor, but nothing changes. I also downloaded the drivers from the HP website for this monitor for Windows 7, but the computer says that it was not properly installed. After three hours on the phone with HP Tech Support, I was told that the monitor was not compatible with the computer. I did my homework before buying, the specifications of this status monitor is it compatible with Windows 7, which miss me so much? Any help would be greatly appreciated... I left my job full time to start this business there are 4 weeks and I need to get up and running as soon as POSSIBLE!

  Thanks in advance!

  I'd say contacting the line of support by the following thread:

  http://h30434.www3.HP.com/T5/desktop-monitors-and-video/new-HP-Pavilion-PC-can-t-change-monitor-resolution/m-p/1048161#M15274

  -DM (an employee of long date HP)

• Display exceeds the size of the monitor screen

  Hello

  I just bought a HP 5208uk (without a monitor). Connected to a (digital) TV via vga on a resolution of 1024 x 768 and dvi on the 1080ix60 resolution (two settings came automatically).

  The display of the Office is outside the borders of the screen, regardless of the I use (vga or dvi).

  I tried to update the drivers (pc and tv to date), playing with the resolutions (does not work) and using the Troubleshoot utility that tells me all is well.

  Please anyone know how I can solve this problem, ideally use dvi?

  All the answers, including blind sarcasm, are welcome, and I would be really grateful to be.

  Thank you

  * Bleep *, welcome to the forum.

  Well, I couldn't come up with any brainless sarcasm, but here's an idea on how you can solve the problem.

  I will try to completely uninstall the video driver.  Sometimes, a new facility from scratch can assign problems.  Then, install the latest driver.  I did this job several times over the years.

• Question about the Acquisition continues through NOR-DAQmx

  I'm a bit new to NIDAQmx methodology and I was wondering if someone could could give me some advice on accelerating certain measures of tension that I do with a case of DAQ NI USB-6363.

  I have a python script that controls and takes measurements with a few pieces of equipment of laboratory by GPIB and also takes measurements in the area of DAQ OR DAQmx via (I use a library wrapper called pylibdaqmx that interfaces with the libraries C native).  As I do with the data acquisition unit is 32 k samples at 2 MHz with a differential pair to AI0.  An example of code that performs this operation is:

  from nidaqmx import AnalogInputTask
  
  # set up task & input channeltask = AnalogInputTask()
  task.create_voltage_channel(phys_channel='Dev1/ai0', terminal='diff',       min_val=0., max_val=5.)
  task.configure_timing_sample_clock(rate=2e6, sample_mode='finite',
        samples_per_channel=32000)
  
  for i in range(number_of_loops):  < ... set up/adjust instruments ... >  task.start()  # returns an array of 32k float64 samples  # (same as DAQmxReadAnalogF64 in the C API)  data = task.read(32000)  task.stop()  < ... process data ... >
  
  # clear task, release resourcestask.clear()del task< ... etc ... >
  

  The code works fine and I can all the 32 k spot samples, but if I want to repeat this step several times in a loop, I start and stop the job every time, which takes some time and is really slow down my overall measure.

  I thought that maybe there is a way to speed up by configuring the task for continuous sample mode and just read from the channel when I want the data, but when I configure the sample for the continuous mode clock and you issue the command of reading, NOR-DAQmx gives me an error saying that the samples are no longer available , and I need to slow the rate of acquisition or increase the size of the buffer.  (I'm guessing the API wants to shoot the first 32 k samples in the buffer zone, but they have already been replaced at the time wherever I can playback control).

  What I wonder is: How can I configure the task to make the box DAQ acquire samples continuously, but give me only the last 32 samples buffer on demand k?  Looks like I'm missing something basic here, maybe some kind of trigger that I need to put in place before reading?  It doesn't seem like it should be hard to do, but as I said, I'm kinda a newbie to this.

  I understand the implementation of python that I use is not something that is supported by NEITHER, but if someone could give me some examples of how to perform a measure like this in LabView or C (or any other ideas you have to accelerate such action), I can test in these environments and to implement on my own with python.

  Thanks in advance!

  Toki

  This is something I do a bit, but I can only describe how I would do it in LabVIEW - I'm no help on the details of the C function prototypes or the python wrapper.

  In LabVIEW, there are accessed via the 'DAQmx Read property node' properties that help to implement.  One is the Mode "crush" which I'm sure must be set before performing the operation.  The other pair is known as "RelativeTo" and "Offset" and they allow you to specify what part of the CQI data buffer to read data from.   If you the config to "RelativeTo" = 'most recent sample' and 'Offset' =-32000, then whenever you read 32000 samples, they are the very latest 32000 which are already available in the buffer of data acq.  Between the readings, the task is free to overwrite the old data indefinitely.

  Note that you will need to do this continuous sampling mode and that you can explicitly set a buffer size smaller than the default which will choose DAQmx based on your fast sampling rate.

  An excerpt from LV 2010:

  

  -Kevin P

• CDAQ start task required?

  In an application using the cdaq 9172 and HAVE, I have a Subvi Setup that configures synchronization then starts the job in time loop do some daq display and the Scriptures. I just noticed that the beginning task.vi DAQmx Start is not mandatory. It seems that the Read DAQmx works whatever the weather I start the task or not. Is that correct. Do not use the start DAQmx task.vi?

  Very often, read the help... really helps:

  State transitions to start the measure or the generation to run the task . With the help of this VI is necessary for certain applications and is optional for others.

  If you do not use this VI, a measurement task starts automatically when the Reading DAQmx VI runs. The Autostart of the VI DAQmx writing input determines if a build task starts automatically when the writing DAQmx VI runs.

  If you use not the DAQmx start VI task and the task to stop DAQmx VI when you use DAQmx Read VI or VI to write DAQmx several times, as in a loop, the task starts and stops several times. Start and stop a task repeatedly reduce the performance of the application.

  -using the LV

  Christian