No more don't Holdem?

Similar Questions

• iPhone 6s more don't stop alert sounds

  My 6 s iphone more continues to make sounds to alert even if there is nothing to report. No messages, no emails,

  nothing on the notification Center, without badges.

  I tried to disable notifications, hold the home and power at the same time buttons... nothing seems to work.

  Only the do not disturb button seems to offer a peace of mind.

  I had never experienced this before.

  Everyone know the same question? This could be a bug?

  Any suggestions or advice?

  Thank you in advance.

  PS The problem persists even with the do not disturb button on.

  Usually it's the opposite - people don't get notifications that they should.  The only advice I have is a restart, forced to reboot, restore the backup of the form and finally restore as new - in this order:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

• 6500 a more don't stop printing double sided

  Good afternoon

  I have a HP Officejet 6500 has more and I can print the mac computer. All of sudden my printer ONLY print double-sided, but only one of my macs. I checked all the settings and even if it is not set to print double-sided, it continues to do so.

  I need help ASAP!

  Thank you

  MMD

  Welcome to the MMD31 forums,

  I understand that you are only able to print double-sided to your JO 6500 has more. I will do my best to help you with this.

  Please try:

  • Mac OS X: how to reset the printing system
  • Restart the computer
  • Re-add the printer (make sure that you add the HP driver and not the AirPrint)
  • HP Officejet 6500 a Plus e-All-in-One - E710n drivers (Select your Mac OS X, click on Next, drivers and you are looking for the full functionality Driver download)

  I hope that helps!

  Happy Monday

• iPhone 6 s more don't backup since the last update

  My 6s more will not back up since the last update to the 9.2.  He then begins to said the backup fails.

  Hello

  This sometimes happens when servers are busy try again later.

  But go to main itunes at the bottom of the page apple ID sign out and then sign.

  Who can help.

  See you soon

  Brian

• Lenovo K5 VIBE more don't connect EDGE

  Hello! My K5 is not connect to the network after that I disconnected by Wi - Fi network. Mobile data switch ON / OFF aren't helping. So, how do I use mobile internet on this? I don't have 3 G or LTE networks in my place now, only work EDGE or Wi - Fi.

  P.S. Sorry for my English, I hope you understand me and give assistance.

  Dude!

  try to insert your SIM card in the other SIM of your Lenovo K5 vibe...

  If his good work...

  so, it's a hardware problem of the first unit slotof...

  and also visit the lenovo service center...

• the more don't I already print y no hay none pieza estropeada creo than not hay as resetearla y no como is

  Como hacer Patrick h. don't sin tener as acudir al servicio Técnico, pues no hay problema en el Interior esta any?

  Hello
   
  Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
  http://support.Microsoft.com/common/international.aspx

• HP 6500 has more don't scan two-sided

  Via the built-in web server, I see a 710n-z 6500 E printer and not the 6500 has more. Is this the reason why I can't use the duplex document feeder? And how can I fix this?

  Hello

  As far as I can see that your unit has no ability to scan double-sided, as the only option in the menu are

  Original copy / 1 side 1-sided
  Copy original/2 faces 1-sided

• Photosmart b209 more don't scan

  My Photosmart B209 more won't scan, I can print but not scan.  MacBook Air.  10.9.1

  On the scan screen, I get:

  Scanning problem

  "try to start the scan of the computer.

  I used this scan featured for years, do not know what problems it is.  Thanks in advance for any support out there!

  Rainbow7000,

  Thank you so much for coming back with me!  I found the answer after much digging on mine.  I do miss my touch front panel, as he went after my update to Maverick.

  I'm ready for a new printer that would make everything wireless, including printing of my phone, any suggestions?

• Cmd + more don't zoom in Photoshop CS6

  Exactly this shortcut does not work. Otherwise:

  • Cmd + less zooms still in Photoshop
  • Cmd + more works fine in Illustrator.

  Solutions of problems similar seems to not work:

  • Back to zero does not solve the problem
  • I have the right, of the United States active input language.

  The problem may be a mixture of all international. I'm a Russian with CS6 in Spanish English language entry on a MacBook purchased in Switzerland (with the French keyboard). Think that the Assembly of the United Nations in a single office :-) However, it worked well with the odd configurations in the same way in the past and still works in Illustrator.

  So I ask if anyone had the same problem to report on the configuration of your language. I hope that we could find something in common in our configurations and work from there.

  Hello, if you get the text tool and type '+', that are the correct character? (I guess that Yes, unless you type this from another machine)

  In addition, you are left-handed? I ask this question for myself, that these keys are too far away... I use cmd + SPACEBAR to perform a zoom in and alt + spacebar to zoom out.

• No more don't FAVORITE of all THE TABS option?

  It has been that the bookmarking feature would allow you to "bookmark all tabs" in a single folder. I used it to organize the results of research by day and he has been very helpful. Is it still possible to do this in an improved version?

  Hello

  Please try right-clicking on a tab and a bookmark all tabs. If the problem persists, please also see safe mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

• HP Officejet don't align more than 8600

  My Officejet Pro 8600 more don't lixation the print head.  I chose the option align several times, reset the printer by unplugging the power cord and even reset to the factory settings.  I'm at my wit's end.  This is getting ridiculous.  Any help would be greatly appreciated

  Hello Kiwikobi,

  Welcome to the HP Forums!

  I understand that your Officejet 8600 will not align the print head. I can understand how frustrating this situation is. I'm here to offer a few suggestions to try to solve this problem. Please follow these steps:

  (1) make sure that the printer is plugged into a live wall, not a surge protector

  (2) remove all your printer ink cartridges and close the door

  (3) remove the power cord at the back of the printer (make no press the power button)

  4 wait 60 seconds or more, then plug the power cord into the printer

  (5) wait for the printer to turn completely, and then install the ink cartridges

  (6) try to print an alignment page

  "If these steps do not resolve your problem, please follow this entire document from HP to a ' alignment failed ' Error Message appears on the all-in-one.

  Please post your results, I'll be looking forward to hear from you.

• HP Photosmart 7520e: HP 7520-e not scanning to E-mail more

  I had my Photosmart 7520e for over a year and have been able to perform all the activities about it without problem. However, the other day I found that I could scan is no longer e-mail. I tried to unplug the router and the printer and reconnect, as has been suggested but cela did not work. I selected manual DNS server and entered for the preferred manual DNS Server 8.8.8.8 and 8.8.4.4 for the other DNS server, but it does not work either.

  When I enter the IP address of my printer I can see that I'm connected to the network and ePrint. everything seems to work as it should. But, when I click on Scan to Email I always get the same message on the printer screen: Server connection error. Unable to connect to Web Services. Confirm access to the Internet, and then try again.

  Hi @ronalds173,

  Thanks for getting back to me.

  I have extra information that might help.

  1. Restore the default settings of your printer directly affect the printing on the computer software, however, to re-establish a wireless connection, your printer may be assigned to a different IP address than what you had before.  The significance of this is that you will have to do some tricks with your configuration on the computer to keep print smoothly. Click the icon of your printer on the desktop of your computer after you do the reset - if it loads the software HP Printer Wizard successfully, you are ready to go and that he should still be able to print from PC.  If you get a pop up that says "Connect a new printer", click that and the printer software automatically detects your printer on the wireless network.  The most pessimistic scenario (very unlikely) and if you lose completely any ability to print, click here to install the HP print and Scan Doctor for Windows.

  2. your printer wireless Direct name and default password - these will remain the same no matter what happens.  The SSID (which is the name of your wireless network) will not be affected by the reset.

  3. you will definitely enter DNS information I posted earlier under section of configuring DNS address.  It will be be switched to "auto". Click to set as "Manual" and enter the numbers as shown.  You should not need to access the IPv6 section for this step.

  4. I recommend to leave this setting alone as the default values are already being optimal for any type of impression you make.

  If you need information more don't be shy to answer.  Thanks again for posting and have a good.

  Kind regards

• HP 8600 more will not accept my royal brite photo paper

  The hp 8600 more done as my brite Royal paper, what do I do? I get the message that I ran out of paper and must use colorloc paper - why? Also, when I connect my iphone via USB I get a message that it does not - connect help

  Hey gomocs,.

  I appreciate the information provided. I would like you to take a look at the sheet of paper and the paper tray capacity:

  Tray	Type	Weight	Capacity
  Tray 1	Paper	60 to 105 g/m2 (16 to 28 lb bond paper)	Up to 250 sheets of plain paper (25 [1 inch] mm stacked)
  	Transparencies	n/a	Up to 70 sheets (17 mm [0.67 in] stacked)
  	Photo paper	250 g/m2 (66 lb bond)	Up to 100 sheets (17 mm [0.67 in] stacked)
  	Labels	n/a	Up to 100 sheets (17 mm [0.67 in] stacked)
  	Envelopes	75 to 90 g/m2 (envelope of 20 to 24 lb bond)	Up to 30 sheets (17 mm [0.67 in] stacked)
  	Cards	Up to 200 g/m2 (110 lb index)	Up to 80 cards
  Tray 2

• age of empires III want to open a session and more does not exclude the password

  age of empires excludes newspapers want III and more don't the password says error 102 and that it's a rong password or username of rong both are correct since I made it for the last year now what is happening and have I been hacked? by another player

  Hi TomWakefield,

  1. have you done any hardware changes or software on your computer before this problem?

  2. what operating system is installed on your computer?

  You can follow this link & check if the problem persists:

  Error message when you connect to a game online of Age of Empires III: "failed connection account: [102] invalid username or password".

  Reference: Articles on Age of Empires III

  Support for common issues of PC games

  Hope the helps of information.

• HP Pro 8500 a more automatic charger will not be permanent power supply?

  My HP Pro 8500 has more don't feed from the top of the charger page sometimes, I put the paper in the feeder and hear that the document is loaded and the fax to dial and connect to the other computer and I hear the rotating charger but my document won't back down and I charge the charger and try new and same thing.

  If I open the top cover I see some gear and I believe that the problem can be in there.

  I went to see a new HP printer and I realize now that HP has changed the system of gears by the presence of a button in the middle to the left of the window, maybe the system that I was a problem in the past, I'm disappointed.

  I hope you can help me as I really this printer, I got a Pix before Canon but I wanted to go wireless then I bought this one and I bought a lot of ink cartridge for it. I went a bought a new HP printer with the same ink cartridges, but they do not use the cartridge anymore.

  I don't know what to do?

  Marie-Thérèse

  Hello

  I understand the problem, and it's the black gear from the top of the document feeder cover which is too far from the white gear under the lid.

  I took the cover and then went out the 4 torx screws and put in a hold under the screw by the black gear and back up the Assembly and now it works fine. In order to understand this out, I had to cheat the sensor to open the lid by putting a piece of thin cardboard in the back of the slot to the left of the printer (must be a light sensor) and then working notice which prepares and then realize that the white gears were doing their job then I thought that the black gear is not engaging and putting in this hold he pushed the black gear closer to the white gear and that's it, as if by magic, it works!

  This fix may not be for everyone but it works for me.

  Perhaps HP should hire me!     Laughing out loud

  Marie-Thérèse