No office at startup, can't see my mouse cursor

Similar Questions

• Satellite P500 - 14L - can not see the mouse when you play the game

  I use P500 - 14L, the graphics card is NVIDIA GeForce GT 330 M with CUDA technology. Unfortunately, when I play C & C 4 game, I do not yet see my mouse cursor.

  Did anyone had this problem before? How can I sort?

  Hi vincentcky,

  This only happens on C & C4 game or with other games too?

  You should look for a patch for this game. You can find it on the site of the factory.
  Additionally, make sure that the latest version of DirectX is installed.

  Last but not least, it would be interesting to know what operating system you have.

• Can not see the mouse pointer

  Whenever I go to a program like WoW or Media Center, my mouse becomes invisible. I can always click on things and move it, I can't see the pointer! I saw a question asking pretty much the same thing, but it did not help me at all the... I also noticed that I can not only see the pointer when I fullscreen, however I can't get full screen sometimes.

  Hi Roxas72,

  Turn off the mouse pointer trails and check if you are able to access the mouse pointer in Windows media center.

  (a) open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking the mouse

  (b) on the Pointer Options tab, uncheck 'Display pointer trails.

  (c) click on OK to save the settings.

  See the links below for the Wow game and try the steps.

  http://forums.worldofwarcraft.com/thread.html?TopicId=24401852177&SID=1

  http://forums.worldofwarcraft.com/thread.html?TopicId=2967988341&SID=1

  More support on the game Wow post your query in the forums of game and check.

  http://forums.worldofwarcraft.com/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not see the text cursor

  I am unable to see the text cursor when I change the text.

  I checked if it ' has nothing to do with the selected color for the obtained layer - which is not the case.

  Also checked to see the/Hide Bounding Box and edges.

  
  

  Fred / Bombay
  

  Fred,

  It's a good old question on several versions.

  You may be lucky to see if you change the zoom level.

  If you are completely lost, you can hold down SHIFT key and use the right or left and see where you are.

• can't see the brush cursor

  Hello

  I have a problem where I don't see my brush on the darks slider,

  Running windows 7... elements v.9 9.03 update.

  1. I uninstalled and reinstalled
  2. set the size of my text in the control panel at 100%
  3. deleted in the elements preferences
     

  The problem persists, I can press the caps lock and transitions of reticle from black to white depending on what area of the photo I'm on, then I can press the caps lock to change back to encircle the cursor once more, the minute I select another tool or different brush I lose the black to white transition of cursor.

  I wouldn't press the caps lock key whenever I want to see my brush cursor.

  Are there users who have the same problem and found a solution for this.

  Thank you

  Bernie

  Yes, I have this same behavior.

  But #5 is not the initial behavior of the cursor, it is definitely the best behavior.

  #7 looks like a bug to me - whatever the appearance of the cursor, just work in the layers palette and go back to the image does not change the cursor appearance.

  You did a good job matching of the section, and I would say that drop you like a bug with Adobe.

  Ken

• Can not see the mouse using projector

  When I use my macbook pro 2015, I don't see the cursor of the mouse (I see the effects of it, though) when connected to a projector using an HDMI cable.

  There are two ways of 'classics' to connect an external monitor. One is mirrored, the other is "Extended desktop", this picture of the Watch pane arranges extended desktop. Each blue rectangle is an icon for the location of the display on your bench. If you make them slide in the same order as they appear in fact, or remember that the area of the projector is "to the right/top/bottom/left" from the main screen, you can move the mouse across the border between views and drag items to follow correctly.

  

  .

• Can't see much text or graphics

  I am running Windows XP and in Office 2003, I can't see the colors and that part of the screen is visible.  When I go online on a Web site, the button send is not visible but it is there, a lot of the text and graphics are not displayed.  What is going on?

  You can follow the instructions below to update a video driver or any driver in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you

  Marilyn

• I can't see the files on the desktop.

  Suddenly changed the profile of my office and I can't see my files on the desktop on the screen more.

  How can I load up my profile of previous office again?

  Thank you.

  Original title: suddenly changed desktop profile and I can't see my files on the desktop more

  Hi SerdarEsendal,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  Icons and desktop files are mainly used to access files and applications (using the shortcut icons) at a faster rate. In your case, you seem to be unable to see the files on the desktop. I understand it must be frustrating. But, proceed us together as a team and try to solve the problem for you.

  Please answer the question-

  (1) is this limited problem files and icons on the desktop?

  (2) that you get an error message or error code?

  (3) have you done other changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Note: You must run the fixit only if; the question is about the icons as well.

  Method 2-

  There is a possibility that the icons on the desktop are hidden.

  Show files and make sure that us.

  See the article-

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

  Note: Make sure that you cancel the changes, since the important operating system files may be exposed to risk.

  In addition, you can also view the article-

  Recover lost or deleted files

  http://Windows.Microsoft.com/is-is/Windows7/recover-lost-or-deleted-files

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• HP pavilion Beats: Hp pavilion bat screen black at home but I can see the mouse

  When I turn on my hp Pavilion beats edition that works perfectly well. But when I put my password it loads and then goes black. I can still see the mouse, but not the screen. I rebooted several times and I'm out of ideas.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• iMac can't see SD cards

  My iMac can't see SD cards as before gradually.

  Disk utility cannot see the SD cards.

  All of my SD cards are good.  They can be read by other computers.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Can't see the content of the tab after update to Version 32.0.3!

  I have my set tabs to display under the toolbars. I've just updated to Firefox Version 32.0.3 and my tabs are all cut off and I can't read any of them, nor I see the 'x' that closes them. I can hardly see the tops of the tabs, but cannot read the inscription on one of them. Help.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• Can not see my own account after reboot

  After reboot I can only see the original user on my Mac + comments, but not the one I added.

  The original is my wife so if it connects inn, first of all, I'm able to move my user by logging out (users obtained all visible) or by selecting my self in the menu to the left of the projector users.

  Upgrade to 10.11.4 to see if there was a problem with 10.11.3 who was present when the account is added.

  It's annoying to sort of not finding your own account and I wonder what's wrong.

  Anyone with an idea?

  Hello dusanofrode,

  Thank you for contributing to the communities of Apple Support.

  If you cannot connect to the original account on your MacBook Pro, looks that FileVault has been activated. It encrypts the bootable floppy and requires that the original to "unlock" before user other users can subscribe in their user accounts. I can see how that might be irritating in the circumstances, and I have a few suggestions to check the situation and helps connect you to your account a little more quickly.

  To see if FileVault is turned on, connect to the user account of your wife and choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault. You can find more information about FileVault in Use FileVault to encrypt on your Mac startup disk.

  If FileVault is turned on, you have two possibilities to be able to connect to your user account to start.

  • "Activate" your user account to connect to start up the Mac. You can do it in the preferences of FileVault (located under Security and confidentiality in system preferences):

  Allow users

  Click to enable users to log on at startup and unlock the encrypted information on the Mac. Users who are not enabled need an administrator to log on before you can use the Mac.

  Of OS X El Capitan: FileVault pane of security & privacy preferences

  • Turn off FileVault:

  When you turn off FileVault, the encryption is disabled and the contents of your Mac is decrypted. Decryption may take some time, depending on the amount of stored information. However, you can still use your Mac to perform other tasks while the information is that is decrypted.

  1. Choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on turn off FileVault.

  4. Click on disable encryption.

  Of OS X El Capitan: turn off FileVault encryption

  All the best.

• How can I see my hard disk and what it contains

  my macbook air has been pop notifications indicating that the startup disk is almost full, which ive just ignored.

  now it says that my hard drive is full and that it cannot receive messages more.

  How can I see which takes all the space

  One way is to click the Apple logo in the upper left corner, and then click this Mac > storage (on the top row).