No option of RDP on the pools

Similar Questions

• RDP for the CSA MC using the user state

  I'm trying to activate an administrator remote access to the MC via RDP. The rule is triggered, which denies this action is #262. Is there a way to allow access to the box based on user RDP State? I need what the admin group is part of a DHCP pool so I can't nail down to just its address. Documentation is not very clear in the application of States of the user.

  Sorry for the long answer... I hope this helps...

  YES, it is absolutely possible to do. Let's say your MC is in a group called "MC CSA Group. In this group, you have implemented policies. Beside policies are your rule failet etc... So what you need is to create a new strategy (set it to Windows or Linux, if necessary). You then create a new 'Module of rule' that you attach to the new policy that you just created. When you create the new rule Module, you'll see an article that says "steady-state". Select the option "apply this rule module if the following status conditions are met:" click the checkbox beside of "user state:". "» Selection in the State of the user list, click on 'NEW '. Here, you will need to create a user state based on what you want to be able to RDP to the CSA MC. give the new user to the user a state name. Here you have the choice, you can create a specific user (i.e. If only a domain user id must have access), or you can use a domain or Local Group. (I.e. If the Domain Admins need to access the CSA MC to the RDP). Allows that you want to use the group Active directory 'Domain Admins '... "The corresponding to groups" enter the EXACT name of the domain group (Ex: MYDOMAIN\MYGROUP). Click Save. Select the new status for the user, and then save the new rule module. Assign the new rule module to the new policy and implement the new strategy of the Group CSA MC. Finally, you need to navigate the new rule module that you created and add a NETWORK access CONTROL RULE. Create an allow rule that will allow the termsrv.exe as server TCP/3389. No matter what host (you said they were on DHCP. I recommend to create a specific DHCP scope for users, so you can lock it the most). Save the rule and generate.

• Impossible to select the host for the pool, can only select Cluster

  Hello

  I try to assess the view and go into the Guide of the evaluators.  When I set up the parameters of resource under the vCenter part settings of the linked Clone Pool where I'm supposed to be able to select a host or a Cluster, I have only the option to select my (not an individual host) cluster.  The problem is that not all hosts in my cluster have access to the SAN that I use for this assessment, so I wanted to be able to isolate the pool to a single host.  Is there some kind of trick to get the hosts present themselves individually?  The hosts are 5.5 ESXi and vCenter vCenter 5.5 Standard

  Thank you

  Dylan

  You can only select the cluster. "Host or a cluster" refers to the fact that if you have a stand-alone Host which is not in a cluster, you can use - so you'd have to move the host you want to use on a stand-alone host or in its own cluster.

  Mike

• How to add new increase in the pool instead of trowing a mistake.

  Im trying to build a game, and after many attempts and hours of reflection, that I managed to create something that looks like a game. Now, the problem is that there are so many objects that are constantly creation and deletion of the scene. the game starts to slow down (it is laggy.). So I searched the net and realized that I have to use a 'method of object pool' instead of creating and deleting of objects after that I no longer, any use of them if I want to make the game more memory.

  At first, I didn't use this method (object pool), but after a while, I realized that I don't have a lot of options. So I started looking for how and why and how.

  Yet, in this example im just try this for the cause of balls (for now) if I can do it for them, I can manage to do it for other objects and projects (it will be easy for me to understand what is past., what am I, when can I add an existing object from the pool and when im creating a (when there are no things like this))

  I copy part of this code go to a tutorial that I found on the net but, since then, so I don't know how to increase the pool rather than raise this error. I tried to create a new object or to increase the length of the pool, but... it doesn't work, so I'm sure that I'm not doing something the way it should be done.

  So I have this so far:
  There is a 'simple' pool who calls a simple form (point circle) class and giving the main stage when you press the button 'SPACE'

  package
  {
            import flash.display.Sprite;
            import flash.events.Event;
            import flash.display.Bitmap;
            import flash.display.BitmapData;
            import flash.display.Shape;
    
            public class Bullet extends Sprite{ 
    
                      public var  rectangle:Shape = new Shape();
    
                      public function Bullet(){
                                super();
                                addEventListener(Event.ADDED_TO_STAGE, init);
    
                                graphics.beginFill(0xFF0000);
                                graphics.drawRect(-5, -5, 10,10);
                                graphics.endFill();
                      }
    
                      private function init(event:Event):void{
    
                      }
            }
  }
  
  

  the SpritePool where I can't understand how to replace error new throw with a new code which increases the pool

  package {
            import flash.display.DisplayObject;
  
  
            public class SpritePool {
                      private var pool:Array;
                      private var counter:int;
  
  
                      public function SpritePool(type:Class, len:int) {
                                pool = new Array();
                                counter = len;
  
  
                                var i:int = len;
                                while (--i > -1) {
                                          pool[i] = new type();
                                }
                      }
  
  
                      public function getSprite():DisplayObject {
                                if (counter > 0) {
                                          return pool[--counter];
                                } else {
                                          throw new Error("You exhausted the pool!");
                                }
                      }
  
  
                      public function returnSprite(s:DisplayObject):void {
                                pool[counter++] = s;
                      }
            }
  }
  
  

  and the play class (the class of documents)

  package {
            import flash.ui.Keyboard;
            import flash.display.Sprite;
            import flash.events.Event;
            import flash.events.KeyboardEvent;
            import flash.display.Bitmap;
            import flash.display.BitmapData;
            import flash.display.Shape;
  
  
            public class Game extends Sprite {
  
  
                      private var ship:Shape;
                      private var bullets:Array;
                      private var pool:SpritePool;
  
  
                      public function Game() {
                                Assets.init();
                                addEventListener(Event.ADDED_TO_STAGE, init);
                      }
  
  
                      private function init(event:Event):void {
                                pool = new SpritePool(Bullet,10);
                                bullets = new Array();
                                ship = new Shape();
    
                                ship.graphics.beginFill(0xFF00FF);
                                ship.graphics.drawRect(0,0, 60, 60);
                                ship.graphics.endFill();
    
                                ship.x = stage.stageWidth / 2 - ship.width / 2;
                                ship.y = stage.stageHeight - ship.height;
                                addChild(ship);
  
  
                                stage.addEventListener(KeyboardEvent.KEY_DOWN, onDown);
                                addEventListener(Event.ENTER_FRAME, loop);
                      }
  
  
                      private function onDown(event:KeyboardEvent):void {
                                if (event.keyCode == Keyboard.SPACE) {
                                          var b:Bullet = pool.getSprite() as Bullet;
                                          b.x = ship.x + ship.width / 2;
                                          b.y = ship.y;
                                          addChild(b);
                                          bullets.push(b);
                                          trace("Bullet fired");
                                }
                      }
  
  
                      private function loop(event:Event):void {
                                for (var i:int=bullets.length-1; i>=0; i--) {
                                          var b:Bullet = bullets[i];
                                          b.y -=  10;
                                          if (b.y < 0) {
                                                    bullets.splice(i, 1);
                                                    removeChild(b);
                                                    pool.returnSprite(b);
                                                    trace("Bullet disposed");
                                          }
                                }
                      }
            }
  }
  
  any suggestions/help how to do it 
  

  To put you on the track (the formalization of requirements errors and events), here, would be a small example. Your pool class:

  package

  {

  import flash.display.DisplayObject;

  public class SpritePool

  {

  private var pool: Array;

  private var count: int;

  private var classRef: Class;

  public get acquainted with what remains in the pool

  public function get availableObjects (): int

  {

  return the meter;

  }

  public void SpritePool (type: Class, len:int)

  {

  classRef = type;

  pool = new Array();

  counter = len;

  var i: int = len;

  While (-I > - 1).

  swimming pool [i] = new classRef();

  }

  public function getSprite (): DisplayObject

  {

  If (counter > 0)

  back pool [-counter];

  on the other

  throw new Error ("PoolExhausted");

  }

  public void returnSprite(s:DisplayObject):void

  {

  pool [counter ++] = s;

  }

  public void increasePool(amount:int):void

  {

  amount of Counter +=;

  While (-amount > - 1).

  pool.push (new classRef());

  }

  public void decreasePool(amount:int):void

  {

  If (counter > = amount)

  {

  counter = amount;

  pool.splice (counter - amount, amount);

  }

  on the other

  {

  throw new Error ("PoolDecreaseFail");

  }

  }

  }

  }

  Now you're catching these errors. Again, the errors should be formalized or you can use the events by extending IEventDispatcher. I kept it simple.

  Here would be the simple ball class that I use:

  package

  {

  import flash.display.Sprite;

  SerializableAttribute public class point extends Sprite

  {

  private var ball: Sprite;

  public void Bullet (): void

  {

  var ball: Sprite = new Sprite();

  bullet.graphics.beginFill(0xFF0000,1);

  bullet.graphics.drawCircle (-5, -5, 10);

  bullet.graphics.endFill ();

  addChild (bullet);

  }

  }

  }

  Draws just a red circle just to see...

  Here is a complete example of its use. It will be important both of these classes (recorded as SpritePool.as and Bullet.as in the same folder). Paste in the Panel actions on frame 1:

  Import SpritePool;

  import the ball; a circle simple red 10px

  import flash.display.Sprite;

  import flash.utils.setTimeout;

  fill the pool, Swimsuits optional

  var pool: SpritePool = new SpritePool (ball, 10);

  Enter a few items from the pool

  Array of objects currently held

  var myBullets:Array = new Array();

  While (pool.availableObjects > 0)

  myBullets.push (pool.getSprite ());

  display in random positions

  for (var i: int = 0; i< mybullets.length;="">

  {

  addChild (myBullets [i]);

  position

  myBullets [i] .x = int (Math.random () * stage.stageWidth);

  myBullets [i] there = int (Math.random () * stage.stageHeight);

  }

  trace ("myBullets was" + myBullets.length + "of the bullets!) pool has"+ pool.availableObjects +"left");

  now, I want more, but I need to check for errors

  VR;

  {

  If that fails, no party!

  myBullets.push (pool.getSprite ());

  }

  catch (e: *)

  {

  This should be something personal, but for speed, fast and dirty

  If (e == ' error: PoolExhausted "")

  {

  trace ("from oh no more balls!") I need more! ») ;

  pool.increasePool (10);

  trace ("added 10 more, now available in the pool" + pool.availableObjects);

  }

  }

  try to reduce the pool of 15, what should the error

  VR;

  {

  pool.decreasePool (15);

  }

  catch (e: *)

  {

  again, should be a formal error

  If (e == ' error: PoolDecreaseFail "")

  {

  trace ("Oops, can't reduce the pool of 15! We will adjust all the extras, available is "+ pool.availableObjects);

  We know that this will work, no error checking

  pool.decreasePool (pool.availableObjects);

  trace ("left in the pool:" + pool.availableObjects);

  }

  }

  Now let's wait for 5 seconds and remove any return to the pool

  setTimeout (ReturnToPool, 5000);

  function ReturnToPool (): void

  {

  Now we will return all objects at the pool

  While (myBullets.length > 0)

  {

  removeChild (myBullets [myBullets.length - 1]);

  pool.returnSprite (myBullets.pop ());

  }

  Now check the pool, should have 10

  trace ("Amount of current bullets to use" + myBullets.length + ", in the pool" + pool.availableObjects);

  }

  For ease, you can simply download my example source (registered until CS5).

  Anything here is just semantics. For example instead of raise an error because the pool is too small, you could simply increase the pool of a fixed amount of yourself and return the requested objects.

  To keep as low as possible objects, you can use a timer to measure the amount of objects in use on a duration and reduce the pool properly, knowing that the pool will grow as it should.

  All this is just to avoid the creation of unnecessary objects.

  BTW, here's my trace which must match your:

  myBullets has 10 balls! pool has 0 left.

  Oh not more balls! I need more!

  Added 10 more, now available in the pool 10

  Oops, can't reduce the pool by 15! We will cut all the extras, available is 10

  Left in the pool: 0

  (after 5 seconds)

  Amount of used balls 0 in the pool 10

• Settings RDP with the customer to view.

  Hi all.

  Is it possible to change the RDP with the customer to display settings (resolution, colors,...) as the RDP of Windows client as it allows? View Client has just 2 options (port connection and SSL or not) by default.

  Thanks in advance.

  Sincerely,

  Jean-Philippe

  Yes you can do it.

  You can use the standard GPO in the ad and you'll find ADM files on the Server View Manager: C:\Program Files\VMware\View Manager\Extras\GPO

  Blog: http://communities.vmware.com/blogs/dommermuth

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Try resetting your preferences. Organize your Opt - Cmd launches the application. Post screen shots of what you see.

• Cannot use the option button to access the folder of bookmarks hidden on a dead drive

  I'm on Mac OSX 10.7.5, and I can easily access the folder on my current drive by pressing the option key (so that the hidden library appears) then get bookmarks of otherwise hidden files (since it's my new boot drive)

  BUT

  I need to copy / move my LAST favorites since ten days previously, a dead hard drive. The drive is usable, just not able to start.

  BUT

  Since this amazing new 'hold option on GO in the Finder menu to see the invisible library feature' (sarcasm) requires your operating system to be started, I can't access the bookmarks folder in the library. How can I do this if the Finder is not started on the dying drive? Is - this make any sense?

  Check this?

  COR - el said

  Try:

  • http://forums.MacRumors.com/showthread.php?t=1209701

• When you want to reduce two web page options are available in the top right of the page:

  Options to reduce the size of a web page are offered via signs place and dashboard at the top right of the page.
  In my case, that the place does not - it just let page to the original format. My only option is to use the dashboard which reduces the page at least - an icon in the taskbar.

  The icon in the Middle toggle between maximized and resizable. When the window is resizable, you can click and drag upward from the lower right to resize the window.

• What does the option "copy photos to the photo library?

  I explore this now app Photos (worst name ever) and I wanted to import photos in Photos. The problem for me is I want to let the pictures where they already are. I'm not interested in a database or the system that hides the pictures of me in the finder. I want to be able to right click and reveal in finder - "export image" is a terrible choice.

  So, I see an option to check in the preferences. It reads: "Copy pictures to the photo library" but has no explanation as to what that means or does. This is what it will move my photos if I select copy? (their disappearance from the original file)? It will resume photos - clutter up my drive? If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  So many questions and I can not find an answer to any place. Even the help files had nothing that I could find.

  It reads: "Copy pictures to the photo library" but has no explanation as to what that means or does. This is what it will move my photos if I select copy? (their disappearance from the original file)? It will resume photos - clutter up my drive? If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  Default is 'Copy photos to the photo library' enabled.  Then the pictures will do exactly that. Any Photo that you import pictures is copied in the photo library and managed by pictures. You can remove the original outside the library after you have verified that it imported properly.

  If you disable the option, pictures reference the file in its original location and does not copy it.

  This configuration is not recommended because you have to manage photos on your own. If you delete photos of Photos, you must delete the original outside yourself. You cannot use iCloud photo library with referenced files and if dot nee restore you from a backup library will need films to another drive, you will need to manually reconnect all originals. It is subject to errors.

  If we make a copy and I update the original in Photoshop - it will reflect this change in the Photo?

  It will not work. Two Photos will ignore changes to Photosho or lose the connection to the original file. To use an external editor in pictures use extensions to change Photos photo editing panel. Let the pics to send the original to the external editor.

  This help page explains how the import options work:

  https://help.Apple.com/photos/Mac/1.0/?lang=en#/pht12e7a8015

• option button missing in the Tools menu in ubuntu

  button in Firefox missing from the Tools dropdown
  using ubuntu 14.04, new intall

  downloads
  Add - ons
  set up synchronization
  etc...
  here but no option button to change settings
  as new tab jump
  or other parameters that are only FLEURIDAS under this option button

  IN Ubuntu box Option called "Preferences". This option is available under the Menu Edition

  • http://www.hecticgeek.com/wp-content/uploads/2012/10/accessing-preferences-in-Firefox-Ubuntu-12.10.jpg

  If your using Firefox 29 and above you can see the Menu button in the right corner in your firefox

  • Menu key = > >

    

• What does the option "delete node" in the Inspector?

  I noticed that this option was available in the web developer Inspector. What is doing? Thank you!

  It removes the html section you right click on the current page. The node is defined as the tag you clicked, the content inside, which could be as little as a word for as much as the entire body of the page.

  The change is temporary and is not survive a refreshment, but can be useful in some cases where the page has a design flaw that makes it difficult to use. Or a really boring ad.

• I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• HP Workspace: What plan options are available for the HP workspace?

  Hey everybody,

  Plan options are available for the HP workspace?

  Thank you

  Bill

  HP workspace is a service of application with the application testing virtualization and delivery provided trained HP Workspace Service Desk officers lighten the load for a client by THIS group. HP workspace is available in two service options - essential and Premium.

  Essential is a great solution for organizations that have the most mobile that need to be in "desktop mode" using Windows or the Web for business applications of less than a few hours a day. Premium provides additional virtualized applications, more cloud computing power and overtime for the users who need to use applications in desktop mode more frequently. With each service, there is an integration of VPN service option (sold separately). The VPN service allows a secure access to data and databases behind the corporate firewall.

  Plan options HP workspace at a glance:

  	Essential	Premium	The Service module
  Monthly usage (per user)	40 hours	80 hours	integration of VPN 1 year
  Cloud (per user), the processing power	VCPU dedicated	VCPU dedicated	Licensure is through gateway VPN - no per user
  RAM to the virtual machine (per user)	4 GB OF RAM	8 GB RAM
  Virtualized applications	≤10	Unlimited
  The application analytics	—	Detailed usage reports
  Support	Incident and Monday to Friday deployment support[1]	Mon - Fri deployment and incident support.7

• I can't and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box

  I can not and never been able to open a file that was previously saved on hard disk by selecting the print option to get in the print dialog box. Firefox displays gooblygook, even if the name of file is an html element, the Notepad of Windows crashes, MS Excel does not recognize the file type. MS Word also displays goobblys when the file has no file extension.

  If you use the file printing, then you will get a file that is supposed to be sent to a printer, and this file has any sort of code formatting for this printer.

  Open such a file in Firefox or a text editor can only work if you use one printer for text to print the file to, then make sure that such a printer is installed and selected.