No oracle after installation service

Similar Questions

• Not able to connect to oracle after installation

  Hi all
  
  I made an installation of oracle-xe - 11.2.0 - 1.0.x86_64 and after installation, I added the paths listed below.
  Now when I try to log into oracle it gives me the error below.
  
  Paths wrong or there is something else I need to do?
  
  
  [root@beta beta] # export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe/
  [root@beta beta] # export PATH=/u01/app/oracle/product/11.2.0/xe/bin:$PATH
  [root@beta beta] # export ORACLE_SID = orcl
  
  
  [root@beta beta] # sqlplus
  
  SQL * more: Production of the version 11.2.0.2.0 Thu Jan 24 14:20:32 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the user name: System
  Enter the password:
  + ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0 +.
  
  
  =========================================
  Always gives error so try to connect in this way:
  
  [root@beta beta] # sqlplus / as sysdba
  
  SQL * more: Production of the version 11.2.0.2.0 Thu Jan 24 14:23 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  Enter the user name:
  
  
  Thanks for the help in advance.

  [root@beta beta] # sqlplus / as sysdba

  You are running Oracle stuff as root: not to do it, use the oracle user instead, for example:

  # su - oracle
  $ source /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
  $ sqlplus / as sysdba
  

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Unable to connect to Oracle after installation

  Hello
  
  I'm trying to deploy an application that uses Oracle Express Edition 11 g. This is the first time I'm installation/use of Oracle, so probably I am doing it just wrong.
  Here's what I did:
  
  X 64 installed Open SUSE 12.1
  Logged as root
  Downloaded and installed Oracle Express Edition 11.2 Release 2, command: rpm - U DownloadedOracleFile.rpm
  Ran /etc/init.d/oracle-xe configure and set the port 8085 and listener 1521, also an auto-start enabled
  Hit my head against the wall for three hours trying to launch SQLPLUS and finally the ORACLE_SID = ORCL and ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe value
  
  So now I'm stuck again because I can not log in to the Oracle instance (?).
  
  1 type sqlplus and enter the password and user root:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0
  
  2 sqlplus virtue sysdba says ERROR: ORA-01031: insufficient privileges
  
  I've been trying to find information on this topic and oracle-xe configure should ask for some kind of password, but it never did. Reset password requires me to login as sysdba, which does not work.
  
  What I am doing wrong?
  
  Thank you
  Petrus
  
  Published by: 920562 on 13.3.2012 08:37

  Hello

  I am not familure with Oracle Express Edition so it's just a guess.

  Y at - it an oracle user associated with this facility although RPM was installed as root? Set oracle sid and oracle at home under this user (other than the root) and try to sqlplus login.

  Also take a look

  Oracle 11 g 2 Express Edition on howto Linux Ubuntu 11.10

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• Not able to boot up normally after installation of Service Pack 3.

  Original title: I am trying to download Windowes XP SP3.

  I am trying to download Windowes XP SP3. After installation and reboot my computer only allows me to start in safe mode. It seems that I don't suystem for SP3. Also, in safe mode, it says I can solve problems by going to the Control Panel, but does not give any other direction on what to fix.

  Hi TimWaldal,

  What is the exact error message that you receive in safe mode?

  It seems that Service Pack 3 is not installed correctly.

  (a) that you try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• WebDAV option does not appear on the "Wizard Add Services of role" even after installation

  Hi all

  Here I have an installation Windows 2008 Enterprise SP2 with IIS 7 installed on it. Thus, even after installation of WebDAV through its installer (as seen here ), WebDAV option does not appear on the "Wizard Add Services of role" (under the direction of "Common HTTP features", as seen here)

  I already tried to reinstall IIS and WebDAV role expansion, but no goals.
  Any ideas what goes wrong?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

• can change uid and gid of oracle user after installation of 11g rac

  can we change after installation of 11g rac oracle uid and gid in 11g RAC. ?
  
  Thank you
  Boucetta

  Read this
  It is supported to change Uid/Gid of the owner of the Oracle database software after Installation? [1474891.1 ID]

  * "It is not supported to change the UID/GID of the owner of the Oracle database software after installing". * "

  Please don't forget to close your message, you got your answer :)

• Error after installation of Service Pack 1 for Windows 7

  I use Windows 7 Ultimate and have just upgraded to win 7 SP1, but after installation, this error "AntiVir Scanner from the command line for Windows has stopped working" message whenever I open an application. These applications don't crash, but the forthcoming disorder with them is really annoying, and I don't know how to solve this problem, because I do not use AntiVirus software at the present time. So please help me. Thanks in advance much.

  [IMG] http://i1226.photobucket.com/albums/ee410/bug_bunny145/Untitled_zps82267e02.jpg [IMG]

  I thank very you much. At that time I used too many software use clean boot as a method to check if a program has been the source of this error, so I decided to reinstall Windows 7. I really appreciate your support. ^^

• Oracle BI Presentation Services User Interface Customization

  Hi, I read the chapter
  Oracle BI Presentation Services User Interface Customization
  in the manual
  Oracle Business Intelligence Presentation Services Administration Guide (Version 10.1.3.2 December 2006)
  
  There's a note (copied from this manual)
  
  NOTE: In Oracle BI, customization of the UI presentation Services and appearance
  is done by changing styles and the message XML files and skins and not through the use of
  JavaScript. You should not change the JavaScript files located in the SAROOTDIR\web\app\res folder.
  where SAROOTDIR is the installation directory. This is because the objects and methods in these
  scripts can change, and because these files may be replaced during the upgrade. (In a dashboard
  users with the appropriate permissions can customize an individual dashboard section by adding
  HTML to it. This HTML can include JavaScript. For more information, read Oracle Business
  Responses of intelligence, dashboards and offer interactive user guide.)
  
  My question is:
  When there is an upgrade, will be replaced only the javascript files?
  Should I need to customize, I have modified the files in SAROOTDIR\web\app\res files? (using IIS, not OC4J)
  When there is a willingness to upgrade, image, css, replaced xml files files files?
  If the files (for customizing the User Interface) will be replaced after the upgrade, is it possible to avoid replacing?
  
  
  If there is a deployment to another machine, do I need to copy files that have changed (for the customization of the User Interface) to paste the SAROOTDIR\web\app\res
  folder? is this a correct way? or correct anyway?
  
  
  Thank you very much!

  Not really. Best practice is not to touch the original skin + style files and work with the own. In this way there is no worries when you upgrade.

• Windows Genuine Advantage Notifications stalls to "execution of process after installation.

  Hello.

  On a corporate network, with a licensed copy of Windows, I just finished installing a load of updates that a PC has missed in the last months or years.  To restart, a window titled "Windows Genuine Advantage Notifications".  I click Next and it works fine, up to 80%, then it hangs at "running the process after installation" and never finished.  It is present each time that I reboot and reconnect.

  How can I do complete, or stop to run to the log in?

  Thank you

  Steve.

  1. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  2. Restart then open IE (only) to http://windowsupdate.microsoft.com . Select CUSTOM and allow the analysis to be performed. If KB905474 is available now, deselect / uncheck and then hide it.

  NB: KB905474 may be listed in the optional software category on the left side. If an update of root certificate is listed there, also, install it to take full advantage of the integrated IE security.

  3. post a status report in response to this topic.

  PS: Are you "COMPUTER service" or SysAdmin for your company?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The brightness of the display function is not after installing Service Pack 2

  Hi, I had installed Service Pack 2 as recommended by the window update (my laptop is HP DV5 series). After installation, my screen resolution has changed and so I put it back to normal. But the strange thing is, I can't change the brightness of the screen by clicking on Fn + F keys that I've always done. The function to change the brightness in the power option is too much missing.

  Problem is solved after I restore the window. FN + F keys work, and re-emerged the brightness option in the Option to. The problem is, should I go for the new update that remind me of in the update of the window? Thank you!

  Hi all

  I suggest that you download and install the latest version of the software of the manufacturing.  Software installation utility your function keys should work again.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.