E/s network device Usermode and ConfigFree protocol error

Similar Questions

• Tecra A2 - lost sound and ConfigFree, what should I do?

  1. the device does not work, the "Sounds and Audio Devices Properties" indicates "No. Audio Device. Attempted relocation Sigmatel Audio and RealTek HD audio, but without success, what I try next?

  Also, CofigFree does not work despite having tried a reinstall, at startup, an error message appears saying "not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree'... How can I fix it?

  Thank you very much!

  I m wondering what you did cela sound and Configfree don t work anymore?  :|
  Regarding the sound issue:
  First, you must remove the software from Realtek sound system manager.
  Control Panel-> software

  Then go to Device Manager and remove the sound card in the list of devices (simply mark it and press DELETE).
  After that restart the laptop, wait for windows would ask the audio driver and then point to the driver files that you downloaded from the Toshiba driver page.

  Regarding the ConfigFree:
  Usually the Configfree should work. If there is something wrong then you should uninstall the Configfree first.
  Then you must restart the computer laptop and recommended to clean the registry using the CCleaner (it s free do google)
  After this attempt to install this new.

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Blue indicator of Win 7 circle network ALSO hang Device Manager and MSE does not

  I have a strange problem since the recent windows updates.

  Indicator of network in the bar tasks displays a blue circle for about 20 minutes after I start the computer. During this time I can't run regedit, I can't open the Device Manager, and I can't seem to activate the protection in real time to Microsoft Security databases. However all the time I have internet and network access.
  After about 20 minutes the light will come back normal (sometimes it goes through a Red Cross first), date at which the computer then runs everything normally, if I have my phone on, I get the auto run screen, Device Manager works and I can also start MSE.
  It's as if the computer is waiting for something to happen. Device problem? However, all devices appear to work normally.
  The latest updates, I made were optional for monitor HP and Microsoft mouse and a keyboard, both of which work well in the era of 'blue circle '.
  I also tried updating the adapter software.
  It is not important, but it's annoying!

  Hi Carmen,.

  The blue circle on the network icon indicates that the system is looking for a network connection.

  If it appears at the start, then start the modem and the router before you start the computer.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Step 1:

  Check if the problem persists in safe mode with network.

  Check out the link:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/is-is/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  Also check the link for more information:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=_dBb8lcqecd

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• 5.3 and chenges wide ACS on network devices

  Hi, I need to identify a way to modify a large number of ACS 5.3 network devices, name, type and location of update.

  Exim is the best solution?

  Thank you

  Renato

  Hello Renato.

  Import/export is a good option already.

  Another option are Python shell scripts:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/SDK/cli_imp_exp.html

  Kind regards

  Federico

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• How to restore the NDIS usermode i/o Protocol

  My XP pro Wi - Fi failed, NDIS usermode i/o Protocol service is not present, I must restore and if so, how?

  Hello

  Thanks for choosing Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with a wireless connection in Windows XP. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you face problems more when working with Windows Mail on the Microsoft Community forum.

• Detection of network devices

  I'll put up a simple LAN to play files high-resolution audio composed: 1) router. (2) switch; (3) PC Windows 7 ultimate 64 bit as a music server. and (4) two Synology DS1512 + software like NAS storage for audio files.

  I correctly installed hard disks in hibernation, and all the State LEDs show that hibernation work correctly.

  At this point in the installation process, the Synology installation instructions indicate that the software should be detected in the network by music PC server.

  However, hibernation appear not in: start > computer > network.

  Music PC server is properly configured to recognize other devices on the network: 1) Home Network; (2) such avancΘs adapter required for network sharing and network mapping; (3) LLTD protocols are installed and enabled in the properties of the NETWORK adapter. and (4) the firewall is disabled.

  I can connect the music PC server to another local network which includes two other PC and see all the network devices in the LAN to help start > computer > network.

  The router DHCP table indicates that music PC server and two DiskStations are in the same subnet, and I can ping the two hibernation since music PC server.

  I would ask for more information: 1) what protocols made a PC uses to detect other network device when you use Start > computer > network? (2) have I forgotten something in the configuration of PC? and (3) someone had a similar problem? If so, what has been done to solve it?

  Thank you very much for your help.

  In your message, you indicate that you have installed new readers to the DiskStation 1512 +, power on and the lights indicate that the systems are running

  Of the Quick Setup Guide

  http://originwww.Synology.com/en-UK/support/download/DS1512+#download_tabs_doc

  Chapter 3, Page 13 shows that the next step would be to install DSM on DiskStation that is actually the OS for NAS. To do this, you need to install System Wizard (Ch3:1) on your PC. This then scans the network for devices and image (Ch3:2) shows that at this time the system is "not installed". Follow this guide through install DSM on the device, remember that Synology Assistant package may not have the last included DSM and the last may be available separately.

  http://originwww.Synology.com/en-UK/support/download/DS1512+#download_tabs_dsm

  On this page, the package of DSM is 4493 package 4448 is that may be the version of DSM included yet.

  When you have installed the disks, they were blank discs. Has DSM of a web interface for you to define what to do with these readers, that space will be used for different functions, which users can access the drives and so on. The SA is the tool of DSM load

  Read the User Guide to see how to use the Web interface to configure how to configure these options. Once you have access to the web interface Windows only participation lies in the fact that you use a browser to implement the DiskStation, it can just as easily be a Mac or a Linux PC. It is therefore really Synology support you have to go for more information.

• LAN/WAN design issues: redundant network core design and equipment

  Dear all,

  I have a growing network that has inherited the reliability and scalability issues:

  (Example from my existing network)

  

  We pop connected with us through lines of CF, that LSPS are connected to our CF traverse on persistent organic pollutants.

  Now, it is necessary to make the core of switching (switch with "?" mark) redundant

  because this is the point of concentration of all connections outside.

  I got an appointment in order to study new equipment (now it's just Catalyst 3560) for this network block.

  Unfortunately, the budget is pretty low.

  I have the following considerations:

  I think that the main problem is that most of the connections is L2 trunk links and it is difficult to prevent this.

  It seems that I need to duplicate all the links to LSP FC, pop and branches (this seems doable) and rely on STP! (this seems bad)

  with all of these links.

  Currently, I have two options for the basic block:

  1. two Catalyst 3750 have duplicated links. (CSW1 LSP1, CSW2-LSP1) and rely on STP

  2. a switch Catalyst 4500 series with two redundant supervisors (probably, they allow to buy if there are strong arguments) have reproduced links and rely on STP.

  These two options do not look good because I have to rely on STP with LSP.

  I would use redundancy features and L3 protocols, but do not know how to avoid trunks

  I have no experience with the material of fantasy as a Catalyst 4500/6500 series.

  Could someone please advice me alternatives for options of design and of the hardware and confirmation or withdrawal of my options.

  Also, I would be grateful if someone could help me find strong arguments for the acquisition of Catalyst 4500 series light up the core.

  Thank you much in advance.

  Best regards

  Max

  Hi Max,.

  in the diagram and description that you provided the switch, you need to replace is a dashboard device that works only for the moment, in L2

  If you plan to go L3 communications in this device, you should review your design to the whole of the network and also review/discuss with MS how that can be converted into L3 communications

  If you want to keep the same as L2 and introduce it into the device or devices for redundancy, I'd rather have two redundant devices of a redundant chassis that I mean pair of 3750 is more reliable chassis 4500 with equipment redundant as soup, UPE however its a reliable option as well and again for sure

  If you rely on STP for redundancy, what is the problem here? It is time of convergence or what is your concern?

  hope this helps

• MacOS Sierra - time machine stuck preparation backup on network devices

  Since I've upgraded to Mac OS Sierra, cannot use my local backup USB. Time Machine is stuck with the message "preparing backup" - more than 12 hours - for network devices, an Apple FileVault and another NAS device. Works very well with the local USB drive.

  Something funny underway with network devices such that she works for the drives the.

  Hope Apple take note and fix.

  I have the same problem. I found this,

  macOS, problems of the Sierra: Time Machine backup Mac

  Time Machine problems prevented the Mac owners of their devices to backup since the upgrade to Mac OS Sierra, and the problem is widespread enough that Apple has published a guide on what to do if you can't back up:

  Discount for the iMac SMC

  1. turn off the device

  2. unplug the power cord from the monitor

  3. wait 60 seconds

  4 reconnect the power cord

  5. DON'T TURN ON DEVICE

  Reset the PRAM

  1. the computer must always be switched off.

  2. Locate the following keys on the keyboard: command, Option, P, and r. you need to hold these keys down simultaneously in step 4.

  3. press and release the power button to turn on the computer.

  4. press and hold the Command-Option-P-R keys. You have to press these keys before the gray screen appears. Continue to hold the keys down until the computer is restarted, and you hear the tone of starting for the 3rd time.

  5. release the keys.

  You can then try to save again. If this does not work, try to disable indexing on the drive you want to back up.

  but I'm not sure it's the same question. I'll try it and report.

• My iPad 2 has suddenly ceased to participate its network 3G (three) and I can't find again

  I have the 2 IPad with IOS 9.3.1 and 3G connection to the network three in the United Kingdom.  Successfully operated it for well over the years over there. Suddenly I can't find the carrier in settings and there is no connection to the three network.  Verified that there is no problem of signal or reception through this network.  Have turned device off and on again once, makes no difference.  Verified that the contract of three network is still alive and OK.  I don't know what to try next.   Curiously, the iPad to my wife 2 - who is younger than mine about 15 months, has exactly the same problem. Advice please?  David Quarmby

  Try troubleshooting steps here > If you can not connect to a cellular or mobile data network

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?

• 'Wireless network device has been disabled' - Satallite A300

  My mother bought this yesterday and shes already been buried under problems, the transfer cable has absolutely nothing of his portable od (although I think that this is the problem, not a new) and when trieing to connect wireless to our network, a message appears "the wireless network device is disabled. Please turn on the camera. "appears...

  ADAPT bit at the front is now in a position to market... and the lght wireless is also on... ive tried Fn F8 also and nothing happens... Although in the essay the Fn brightness key does not change so I think that maybe there is a problem there too although im not familiar with vista.

  With the wireless, he has not yet received up to even looking for a network connection... and connects fine via ethernet... cable please help me with connection problems and a side note advice with other problems.

  Not sure of the computer laptop cos he got just spilled on my knees with a "fix it": p

  Hello

  I put t know what that card WLan you have but you should try to reinstall the WLan driver.
  Go to Device Manager and check first your WLan card.
  Then download the page of European Toshiba driver WLan driver.
  Then delete or uninstall the old drivers WLan (Device Manager) and install the new downloaded drivers.

  Reboot the laptop, and then enable the wireless using the antenna WLan switch and the combination FN + F8.

  If you are not familiar with Vista and don t know how to use the Wlan under Vista OS and then google and you will find many pages that describes how to set up WiFi network.

  Check it out!

• Airport not showing is not as network device?

  My Airport Extreme 802.11ac does not appear in the finder as a network device. It showed in the previous Extreme model I was using, then leave for any reason any. After messing around for a month or two, then trying to get it working again, I bought the new 802.11ac AE, but it does the same thing.

  I have two other devices that appear in the finder under the shared part of the side bar of the Finder window, but cannot figure out how to show by EI. The wireless feature works very well, as a printer BSE connected to the USB port of the AE. Internet

  It would be different if I was using the IP address of the type 10.x.x.x instead being in bridge mode and using 192.168.1.X?

  Any suggestion is appreciated.

  My Airport Extreme 802.11ac does not appear in the finder as a network device

  In the finder it will show only upward if you have a connected USB drive.

  It showed in the previous extreme model that I used

  Only if you have the network resources available to him.

  Computers will be displayed, because they offer resources network, the PF to be exact.

  But the airport will not be displayed. Mine is not, and never has.

  My Time Capsule arises because it is a hard drive offering services of files on the network.

  Printers will not appear in the finder no longer...  Again, I have printers online... they do not show in finder and never have any version of Mac OS X, I used.

  However a printer with USB or SD card slots and a wired card which offers services of files on the network may appear... In the only finder services files will be displayed.

  EI has to offer network file services appears in the Finder... Plug a USB stick into the USB port and set it to share on the network and the AE will then appear in the finder.

  The place that you are looking for your AE's utilitarian Airport... It's the Apple of method available to see you the configuration of EI... no viewfinder.