Help! Aurora R4 BIOS upgrade, post after reset CMOS

Similar Questions

• No post after resetting bios HP Elitebook 8440p

  Good day HP,.

  I have reset the bios on an HP Elitebook 8440p, but after that it will not publish. The lights on the keyboard flash market / stop abit, and then it reboots constantly with no photo.  I removed the battery, hard drive, tried other types of ram, disconnected the bios battery for a while (under the keyboard).  Sometimes it starts with no picture on the screen but fan is completely and stays on for a while.

  Any tips?

  Thanks for any help

  Kind regards

  Digimp

  Hello

  It seems that the customer has replaced with something matched ram (8 GB 1600 mhz crucial sticks). Ubuntu etc. would be fine and would install, however, anything with win7/win8 wouldn't work (and bios problems mentioned). Swapped the ram and everything works now.

  Sorry for wasting your time, and have a good weekend!

  Kind regards

  Digimp

• Dell XPS 13 stop during sleep after bios upgrade

  Recently updated my BIOS Dell XPS 13 L321X-the worm 8. Since then, whenever I close the lid and put the laptop to sleep for several hours, the processor seems to come and the backstory is very hot. When the cover is opened, the screen remains blank and no wake mode 'sleep'. The only recourse is to make a hard stop with the power button and then restart. The laptop restarts then black screen troubleshooting, or select the normal startup of windows. Since then, I tried to update all the drivers, but still no luck. He continues to run hot and won't start after placing the phone in sleep mode.

  Any help is appreciated!

  Divider ~.

  Thanks for the quick response!

  To review, my problem started when I updated the BIOS to ver. A08. Before reading your solution, I ended up flashing my BIOS downgrade - worm. A07.

  I started a series of applications and then closed the lid, let go in mode "Eve". After a long period of time, I opened the lid and the wake of the computer normally with no issue. No screen cases, no empty overheated. And not need a hard stop and restart with the power button.

  Hope that this remains the case, I will record your steps suggested in case reports of problem, but so far, it seems that BIOS upgrade vA08 was the problem and a reflash with v A07 was the solution.

• After reset, can the time change and the date even anyone help

  Recently, I noticed that the date and time of office are not correct. After resetting the date and time, this happens again. I would appreciate any suggestions to help solve this problem

  Hello

  you don't say if it is up to an hour and date as in 2007 etc past after turned off your computer, and then turn it back on at a later date

  If so, this would indicate a battery CMOS failed in the motherboard

  the battery maintains system settings when the computer is turned off

  they cost about $5

  http://www.computerhope.com/issues/ch000239.htm

• Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please...

  Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please... It happened after I merged the two files...

  Hi mannys14196422,

  This problem has been resolved in the last update. Go help--> Check for Updates.

  Please let us know if you still face the question.

  Kind regards

  Sandeep

• HP 500-210qe: errors of HP Active health after BIOS upgrade

  In October, I made a BIOS upgrade using sp73062.exe to 80.21 A.  Since then, I have acquired a series of warnings in the application log:

  1. event ID 3; COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of command not valid.: one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

  2. event ID 3; Exception COM runs a command EXECUTE Casl Diags.ThermalDiagnostics = return value from the BIOS indicating that a proposed BIOS admin password violates password BIOS. policy: Exception from HRESULT: 0 x 80000028

  3. event ID 204; BatteryCheck.exe did not return result of 0.

  4 event ID 203; Not supported by the ACEF

  At least one and that 14 of the foregoing have occurred daily since the upgrade.

  I can't: a) ignore these events, or b) go back to the previous version, or c)?

  The solution is to install one version of HP Support Assistant, other than the 8.1.40.3 version (such as downloaded in sp72974.exe) which does not have State errors.  So far there are no other version available on the HP download site. For now, I uninstalled the support Assistant.

• X 360 HP spectrum: spectrum HP x 360 BIOS upgrade using SCCM

  Hello!

  I'm currently loaded with a BIOS upgrade mass to 500 + HP Spectra x 360 changeable and I was hoping to do this using SCCM 2012 as I already have for other desktop computers and laptops

  Previously, I would have created a cmd file using hpqFlash.exe or HPBIOSUPDREC.exe, however, I can't be working:

  hpqFlash.exe - BIOS is downloaded from HP in an exe format that I can get from .bin & .sig files, but this tool requires a .cab file

  HPBIOSUPDREC.exe - after you have retrieved the BIOS for .bin files, this tool is complaining that they are not in the correct naming convention 2013 BIOS and I get about 4 of each?

  Then. Does anyone have this successful previously? I have to rename the correct naming convention .bin files, if so, how would like to know this?

  * EDIT - we also use bitlocker so it may need to be disabled before a BIOS upgrade? All I really need is the command line and can go from there!

  Thanks in advance!

  According to the HP Support, it couldn't be done... BUT... Turn on you can put a/q on the extracted exe and it will install silently... Not that he mentions that in the BIOS, notes...
  
  Finished by editing this script below and copied to a location of the account SYSTEM is able to access: https://gallery.technet.microsoft.com/scriptcenter/Suspend-Bitlocker-and-0e3d43c0

  schtasksCreateCommand = ' schtasks/create /TN "" bitlockerscript"" /XML "«\\domain.local\NETLOGON\HPBIOS\bitlockerscript.xml»»»

  (I used an .xml file to give me more options on the task even on battery, because we want this task to force bitlocker on the drive to the next opening, if it worked or not).

  Then, creating a new application in SCCM with source files (containing a copy of the script) pointing to a batch file that contains:

  cscript.exe bitlockerstatus.vbs
  Timeout/t 10
  0804FF35.exe/q
  Timeout/t 600

  (Waiting times were just for me to ensure that the system BIOS before SCCM installation asks for a restart).

  To force the restart I changed the return codes:

  Soft reboot 0

  1707 soft reboot

  3010 soft reboot

  Finally... I created a rule of detection using this script below to detect the installed BIOS version:

  "Change of strBIOSUpdateVersion to the version that you deploy.
  strBIOSUpdateVersion = "F.35.
  ' Get the Version of the BIOS from Win32_BIOS
  Set objWMI = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
  Set colBIOS = objWMI.ExecQuery ("Select * from Win32_BIOS")
  For each objBIOS in colBIOS
  If objBIOS.SMBIOSBIOSVersion > = strBIOSUpdateVersion Then
  WScript.Echo "detected".
  End If
  Next

  Hope this helps to all the

• Good chipset driver for Aurora R4 before upgrade to Windows 10

  Hello

  1.I am trying to update all my drivers before upgrading to Windows 10, such as recommended by Dell.

  I used assist support that identifies my computer correctly, he took me to the site download and accessible tab: Guide Me. He identified an Intel 9.4.2.1019 chipset driver, and I installed it. Turns out I didn't look carefully and is identified as supporting Area 51 computer, not the Aurora R4. So far, the computer works well.

  When I go to the tab "I will find them me" and the SEO of my specific computer once again, it shows the Aurora R4 driver driver Intel 9.4.0.1026 chipset. I downloaded and tried to install it thinking that my first download suggested by mistake, but when I click on install a warning comes up saying that I am trying to install a driver more OLD, so I left.

  How can I find out what Chipset Intel driver is correct before moving on to Windows 10?

  2 Dell recommend upgrading the BIOS to the latest version. I have A 03. Downloaded A 11 on the site less 'I find them myself' and when I tried to run it in Windows, it says that I must update to A05, everything first. But there is no A 05 not listed any where on the site drivers and downloads for the Aurora R4.

  I really must in view of the possibility of computer rendered inoperative with flash BIOS, upgrade to A11 to make my transition to Windows 10 quote? If I do where can I find the driver?

  Thank you

  Greg

  You will probably get a better response if you re - post it in the forum of the Club of Alienware .

  Do not forget to mention the current Windows version when you post it.

• How to unlock an ipad after reset of the manufacturer?

  How to unlock an iPad after reset of a manufacturer.  Purchased from a third party and do not know the original owner.

  Without the previous owner Apple ID and password, the iPad doesn't help. Not even Apple can help you.

  Get your money back if you can.

• Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please

  Forgot, my apple Id and password, so I, just, decided to reset, my, phone, thru, bis, new, Tunes, account, I thought, after reset, phone, I would get right through, and I didn't, I, fonts, remember, my, e mail, I, defined, phone, up, with, someone, please, help

  These can help:

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Cannot find HP printer after reset printers on Air

  I hope someone here can help or has had the same problem.

  I recently got a new printer wireless HP Envy 5660.  Everything worked find when installing, it finds the printer on the network, and he added with the scan function.  During the last part of the installation, I had battery problems and he stopped (later I realized, it didn't matter because it was for registration and other things that could be done later).

  Since I thought I had to redo the installation, I thought I would start from scratch.  I deleted the printer (who also had the function of scan displays on the screen of the Mac printer) and redone the installation.  Now after installation configurations the password on the printer wireless, it is said that the wireless settings have been saved, but could not find my printer on the network.

  I've searched the forums and I tried everything I could find:
  • Reset the printers on the MAC
  • Restore the default settings of the printer
  • Reinstall the drivers both Apple and HP
  • Restored from a Time Machine backup
  • Turn off the printer, router and computer
  • To repair the hard drive
  • Other stuff I probably forgot

  I can add the printer as an IP printer, but then I do not have the scan of the Mac function.

  I know that it worked perfectly before because when I installed it the first time it was on the Mac with printing and scanning.  To make sure that it wasn't the printer or the network, I went to another Mac and clicked on the button Add Printer printers, and wireless printer has been found on the same network and installed with the scan function.

  If anyone has any idea, please let me know because I really need the scan function.

  It could be something with the change in network or Hello after resetting the printers that does not show the previous printers in the network?

  May be corrupted printer preferences given that you have installed the drivers both Apple and HP. It is not necessary to do both.

  Open the Finder.

  In the Finder menu bar, click go > go to folder

  Now type or copy paste the following text:

  ~/Library/preferences/com. Apple.Print.Add.plist

  Click OK, and then place the com.apple.print.add.plist file in the trash.

  Restart your Mac and your printer to test.

• Satellite U400 - 112 (PSU40E) - Safe BIOS upgrade - SOLUTION

  Dear all,

  Trying since long upgrade for the bios of my laptop favorite... Toshiba Satellite U400-112 (PSU40E)
  I have Windows 7 Ultimate (64-bit) English and BIOS version 4.00(until yesterday).
  The problem was that, in windows 7 (32 & 64 bit), the tool flash never started the process of update due to several incompatibilities.
  There is a solution (in fact a workaround solution) to be honest and works 100%!

  My solution is:

  (A) download the latest bios upgrade version appropriate for your laptop, save it (tomake it is easier in the root of the C:\ drive) and unpack it in a temporary folder (for example: bios).

  (B) use the Hiren's Boot CD a real support from a USB or CD (download and burn a CD or follow the process of CD copy on a USB key).

  (C) boot the laptop from the CD or USB flash and in Hiren's Boot Menu, select the version of mini Windows XP.

  (D) allow completely Windows XP startup and then run the tool to update the bios flash from the temporary folder. The update procedure make it exactly as it is described in the manual of the bios update. (If you are not experienced)

  (E) it will update the bios, and then he stops himself. Then you can start normally your operating system, remove any CD or USB key mounted on it.

  I hope you find it helpful and convenient.

  Best regards

  Ioannis

  To be honest I updated the BIOS on my U400 (running Win 7 32 bit), A210 (Vista) and Tecra A10 (Win 7 64 bit) using the victory as the BIOS version and never had any problems in running the tool
  Anyway thanks for sharing your knowledge with the community

• I have reset my user password after reset and recovery mode, I clicked on save and now the user connects, but there is a problem wih Keychain it does not open safari or any internet connection

  After resetting my password user in recovery mode the connected but user Keychain has an error and or safari or chrome will connect to the inernet also trying to access my icloud it asks to check my apple ID and freezes when I try to update the keyring password, it also freezes and nth seems to be work ive tried in safe mode , but the same problem

  Hey Mariam Gamal.

  I see that you have reset your password for the user account on your Mac and are facing some issues related to your keychain. I think that this article will be able to help you remedy this situation:

  OS X: Keychain Access asks for Keychain "login" after the change of password - Apple support

  https://support.Apple.com/en-us/HT201609

  Thank you for using communities Support from Apple!

• IPhone locked after reset options.

  I used my Iphone 16 GB 5, for one year. LETER a week I decided to present it to my mother and I reset my default settings. (I was the first user of my camera, it was purchased in the shop). IPhone write - me in your Apple ID to restore (after reset setting, first start). I fill it up but my iphone told me that this ID cannot be used to restore my iphone. And can not pass the system restore, is unable to make the Itunes backup. Someonew can help me? =(

  Hi Vlad2626,

  If your identifier Apple has been locked, take a look at the resource below to solve security problems.

  If your identifier Apple is locked

  If you or someone else enters your password, security or other wrong account information questions too many times, your Apple ID automatically locks to protect your security and you cannot connect to Apple services. You can unlock your Apple ID, after verifying your identity.

  If your identifier Apple is blocked for security reasons, you may experience one of these alerts:

  • "This identifier Apple has been disabled for security reasons".
  • "You cannot sign in because your account has been disabled for security reasons."
  • "This identifier Apple has been locked for security reasons.

  When you see one of these alerts, you can go to iforgot.apple.com to unlock your account with your existing password or reset your password. After several unsuccessful attempts to unlock your account, your identifier Apple will remain locked and you can try again the next day.

  If you use the two-step verification, you must use your recovery key and trust device. And if you use two-factor authentication, you need a trusted device or a reliable phone number to unlock your Apple ID.

  If you see a message which differs by alerts above and you can't reset your password, contact us for assistance.

  To learn more

  After changing your password, you may need to update in your iCloud settings and in all Apple services log in with your Apple ID. Learn more about Apple ID and where you can use it.

  Last modified: 10 December 2015

  Take care