No reports of Cisco network

Similar Questions

• Help with M6348 connecting to a Cisco network

  Hello

  Can someone help me with best practices by putting R710 via a M6348 stacked with a cisco network.

  Our configuration is the following

  M1000e

  2 x 1 GB pass-through fabric a

  2 x M6348 wired in a pile in the B fabric

  6 x popular R710 with four NIC ports in the fabric B (3 are general purpose servers, 3 are Hyper-V servers in a cluster)

  Cisco network

  For most of the Cisco 3560 switches

  20 VLAN (1 per building) configured, mainly for the isolation of traffic (VLAN 300-320)

  What (I think) that we want to

  The M6348 connect to the core network in a SHIFT (4 x 1 GB ports. Can it be divided 2 ports each of the stacked M6348?)

  Have a mapping of right for 1-3 to VLAN 301 R710

  Configure R710 4-6 for access to all VLANS for the Hyper-V hosts can be placed on the VLAN correct

  Use the fabric for the connection to the San

  Network management is carried out by a third party (we are unable to change this) and they claim that they are unable to connect Cisco/Dell!

  We are server guys, guys network no, so something stupid (especially for Cisco to give to our management company) would be appreciated.

  We tried to configure the switches in Simple mode, using a Dell deployment guide, but all we seem to get is the default VLAN to all ports on the switch 1 battery, but no other VLAN and no active port 2 in the stack.

  I've probably missed lost info on and were not very clear, so if more info is needed, please get back to me.

  Thanks in advance for the help

  Rich

  Thanks for the information updated, actually, this confirms that the problem is with the connection to the Cisco switch. Is that what we tried a general link, instead of trunk?

  mode console # switchport general

  Console # switchport General allowed vlan add 300-320 tag

  Console # pvid General switchport 301

  Console # end

  Are we sure that the VLAN 301 IP address is 10.49.56.0? This doesn't seem fair.

  When we try to pings on the trunk/General connection to the Cisco switch, make sure you that the servers have the default gateway defined on the VLAN IP address they are in access mode. Thus, when in the access mode VLAN 301 the gateway server would need to be 10.49.56.0. I would like to verify that the IP address, however.

• Cisco Network Assistant

  Hello

  Anyone know how really peripheral can be added in the community and manage through CNS version 6? I read on the website of cisco that Cisco Network Assistant can support up to 40 aircraft in the community, I don't know if it was for the previous ANC 5.0 version as shown in the link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/product_data_sheet0900aecd8068820a.html for switches 40 or less while watching in the version 6.1 of the ANC data sheet , he also mentions the community limiting to 40 devices while the following link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/datasheet-c78-730210.html shows that for switches 40 or less. Will be looking forward to seeing the answers.

  Thank you

  Waydee

  Hi Waydee

  Please refer to the for Cisco Network Assistant Release Notes 6.0 and later versions , where you can find all of the changes. In summary the community limits are same (max 40) compared to the old version (5) of the CNA.

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• Cisco Network Assistant 5.5

  I downloaded Cisco Network Assistant 5.5, every time when I try to run I get the error message "can't creat Java virtual Machine"any idea how to solve this problem? ".

  I  downloaded Cisco Network Assistant 5.5, everytime when I try to run I get error message "Could not creat Java virtual Machine' any idea how to solve this?

  To work around this problem, open the file C:\Program Cisco Systems\CiscoSMB\Cisco network Assistant\startup\startup.properties (the default installation path) and modify this entry:

  JVM_MAXIMUM_HEAP = 1024 m

  Replace 1 024 m with a bass that does not exceed the available RAM. There is no way to predict what value will work. Try 512m and drops even if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to set your own dial peers.

  Go to the link for more information below

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• In test report says wireless network wireless radio does not (8500 a909g)

  I can't get my HP Officejet Pro 8500 Wireless put A909g in place on the network. I have the correct network name, security type, and the security key, but it does not detect the printer. I ran a test on the printer's wireless network and, at the top of the page, it says "the wireless radio does not work... '.

  What can I do?

  Try to reset the printer by pulling on the plug and waiting for 30-40 seconds.  If that is fixed, contact HP for repair or replacement.  Prepare to spend hours with them on the phone.  Keep your handy wireless network test.  Also run a printer status report.  You need both.

• WAP4410N existing other than Cisco network gateway

  Hello

  I was wondering if someone can quickly answer my question?

  I am trying to use my WAP4410N to create a wireless bridge to an existing network that does not contain any Cisco kit. After reading the manual, I tried the bridge WDS wireless solution, which is my router wireless D-Link & MAC address, but there is no option to put in network WPA2 key, I guess I misunderstood how this feature works, & maybe it works with other products of Cisco wireless?

  Thanks in advance to anyone who can shed light on my question,

  Andy

  Sent by Cisco Support technique iPhone App

  HI Andy,.

  Noramlly that configure you WDS Bridge would need to implement WPA 2 personal option under the wireless part, and then click Security.

  Since the SSID and security must be the same, is that were you would enter information. As to make this set your work with a D-Link wireless router, you'll never miss that probably the question were that this wireless device must support WDS. Even then you might also encounter a question having no match wireless chipsets as well.

  More than likely that this configuration will not work for you. I advise to use an other WAP4410n to establish the connection. Rely on what you are wanting to do a WET200 may also work for you since its just fill a wireless network and only use WDS, but I have never tested this connection with a D-link router so I can't 100% guaranteed if this implementation will work as well or not.

  Hope this helps and let me know if you have any questions.

  Thank you

  -Clayton Sill

• map of Cisco network topology first Infrastructure

  Hi just want to ask if it is possible to create a map of the network topology of edge of the main cisco which shows the cable devices and wireless infrastructure, or do we need another cisco product to accomplish.

  Thank you

  Hello

  Topology service is not supported in 2.0 IP, however, it is in the road map.

  for the support and the function of the comparison, you can check out the link below:

  http://www.Cisco.com/en/us/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html

  Thank you-

  Alya

  [Note the useful post]

• POV/Member selection in the reports gives 404 network off the server

  Hello

  We have set up two environments (UAT and DEV) with Hyperion Planning, report and Essbase with version 11.1.2.4

  We have environment UAT with SSL & Loadbalancer and DEV without SSL and balancer load, but in both cases when we open an Essbase report, it gives a pop up to certain members or POV. By clicking on 'Select' the mistakes page not found / check with your administrator. When I'm on one of the servers and connect to the workspace directly on port 19000 it gives no error. It works very well.

  Architecture:

  Server 1: AIX 7.1: Foundation, Calc, planning, EAS

  Server 2: AIX 7.1 Essbase

  Server 3: Windows 2012: EPMA, officer of the RAF, RAF Java and EN and FDMEE.

  Case 1: I have to connect to the Windows server then go to browser and connect to the port 19000 it works perfectly

  2 cases: I try to connect on all the machines here on the network of the company the same thing http://OHSserver:19000 / workspace or https://F5/workspace or http://F5/workspace it does NOT work

  I did HTTP followed by using wireshark, it indicates that the OHS server rejects the packets. Connection: refused

  Any idea on this. Someone risked a similar question.

  

  I click on select and get below error.

  

  Thank you

  AA

  John,

  I'm pretty close to this point. Yesterday, I did the network team opens the way for management just to test and it worked. It was related to this division of the network.

  Now they want that we ensure that all our services are listening only 'SERVICE IP' and not 'MANAGEMENT '. As it is not secure to do a medium.

  I was able to connect while changing 'LISTENING ADDRESS' in Weblogic and OSH I uncommneted ' LOOK: 19000.

  But the only component I'm able to do it is the RAF officer. It still works on all available interfaces.

  When I do a netstat - ano | grep 6800

  I get as *. 6800.

  Any idea where we can change it?

  Thank you

  AA

• Drivers on Device Manager say they are up to date but I'm getting reports that my network cards not upward to date and my NVIDIA and other drivers? especially from NVidia

  my machine continues to say my drivers is not up-to-date, but when I try to update in the Device Manager it claims they are confused? How can I ypdate my drivers for free I just paid so far my OS for win 7

  sincerelly,

  setcrosss1

  If you have a finder driver installed, uninstall it. Very often, they find the correct manufacturer drivers but only suitable for revisions to material beyond the stuff in your own computer.

• Cisco ASA 5505 VPN Site to Site

  Hi all

  First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

  I'd appreciate any help that can be directed to this problem please.  Slowly losing my mind

  Please see details below:

  Two ADMS are 7.1

  IOS

  ASA 1

  Nadia

  :

  ASA Version 9.0 (1)

  !

  hostname PAYBACK

  activate the encrypted password of HSMurh79NVmatjY0

  volatile xlate deny tcp any4 any4

  volatile xlate deny tcp any4 any6

  volatile xlate deny tcp any6 any4

  volatile xlate deny tcp any6 any6

  volatile xlate deny udp any4 any4 eq field

  volatile xlate deny udp any4 any6 eq field

  volatile xlate deny udp any6 any4 eq field

  volatile xlate deny udp any6 any6 eq field

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  link Trunk Description of SW1

  switchport trunk allowed vlan 1,10,20,30,40

  switchport trunk vlan 1 native

  switchport mode trunk

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  No nameif

  no level of security

  no ip address

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 92.51.193.158 255.255.255.252

  !

  interface Vlan10

  nameif inside

  security-level 100

  IP 192.168.10.1 255.255.255.0

  !

  interface Vlan20

  nameif servers

  security-level 100

  address 192.168.20.1 255.255.255.0

  !

  Vlan30 interface

  nameif printers

  security-level 100

  192.168.30.1 IP address 255.255.255.0

  !

  interface Vlan40

  nameif wireless

  security-level 100

  192.168.40.1 IP address 255.255.255.0

  !

  connection line banner welcome to the Payback loyalty systems

  boot system Disk0: / asa901 - k8.bin

  passive FTP mode

  summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  domain-lookup DNS servers

  DNS lookup domain printers

  DNS domain-lookup wireless

  DNS server-group DefaultDNS

  Server name 83.147.160.2

  Server name 83.147.160.130

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  ftp_server network object

  network of the Internal_Report_Server object

  Home 192.168.20.21

  Description address internal automated report server

  network of the Report_Server object

  Home 89.234.126.9

  Description of server automated reports

  service object RDP

  service destination tcp 3389 eq

  Description RDP to the server

  network of the Host_QA_Server object

  Home 89.234.126.10

  Description QA host external address

  network of the Internal_Host_QA object

  Home 192.168.20.22

  host of computer virtual Description for QA

  network of the Internal_QA_Web_Server object

  Home 192.168.20.23

  Description Web Server in the QA environment

  network of the Web_Server_QA_VM object

  Home 89.234.126.11

  Server Web Description in the QA environment

  service object SQL_Server

  destination eq 1433 tcp service

  network of the Demo_Server object

  Home 89.234.126.12

  Description server set up for the product demo

  network of the Internal_Demo_Server object

  Home 192.168.20.24

  Internal description of the demo server IP address

  network of the NETWORK_OBJ_192.168.20.0_24 object

  subnet 192.168.20.0 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_26 object

  255.255.255.192 subnet 192.168.50.0

  network of the NETWORK_OBJ_192.168.0.0_16 object

  Subnet 192.168.0.0 255.255.0.0

  service object MSSQL

  destination eq 1434 tcp service

  MSSQL port description

  VPN network object

  192.168.50.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_24 object

  192.168.50.0 subnet 255.255.255.0

  service object TS

  tcp destination eq 4400 service

  service of the TS_Return object

  tcp source eq 4400 service

  network of the External_QA_3 object

  Home 89.234.126.13

  network of the Internal_QA_3 object

  Home 192.168.20.25

  network of the Dev_WebServer object

  Home 192.168.20.27

  network of the External_Dev_Web object

  Home 89.234.126.14

  network of the CIX_Subnet object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_84.39.233.50 object

  Home 84.39.233.50

  network of the NETWORK_OBJ_92.51.193.158 object

  Home 92.51.193.158

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq netbios-ssn service

  the purpose of the tcp destination eq smtp service

  service-object TS

  the Payback_Internal object-group network

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_3

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  service-object TS

  service-object, object TS_Return

  object-group service DM_INLINE_SERVICE_4

  service-object RDP

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  object-group service DM_INLINE_SERVICE_5

  purpose purpose of the MSSQL service

  service-object RDP

  service-object TS

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service DM_INLINE_SERVICE_6

  service-object TS

  service-object, object TS_Return

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  Note to outside_access_in to access list that this rule allows Internet the interal server.

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-list of FTP access

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list of SMTP access

  Note to outside_access_in to access list Net Bios

  Comment from outside_access_in-SQL access list

  Comment from outside_access_in-list to access TS - 4400

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

  access host access-list outside_access_in note rule internal QA

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

  Notice on the outside_access_in of the access-list access to the internal Web server:

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

  Note to outside_access_in to access list rule allowing access to the demo server

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list to access MSSQL

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

  Note to outside_access_in access to the development Web server access list

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

  AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

  AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

  Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

  permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

  pager lines 24

  Enable logging

  information recording console

  asdm of logging of information

  address record

  [email protected] / * /.

  the journaling recipient

  [email protected] / * /.

  level alerts

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 servers

  MTU 1500 printers

  MTU 1500 wireless

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-711 - 52.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (wireless, outdoors) source Dynamics one interface

  NAT (servers, outside) no matter what source dynamic interface

  NAT (servers, external) static source Internal_Report_Server Report_Server

  NAT (servers, external) static source Internal_Host_QA Host_QA_Server

  NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

  NAT (servers, external) static source Internal_Demo_Server Demo_Server

  NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  NAT (servers, external) static source Internal_QA_3 External_QA_3

  NAT (servers, external) static source Dev_WebServer External_Dev_Web

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  Enable http server
  http 192.168.10.0 255.255.255.0 inside
  http 192.168.40.0 255.255.255.0 wireless
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 84.39.233.50
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 192.168.10.0 255.255.255.0 inside
  SSH 192.168.40.0 255.255.255.0 wireless
  SSH timeout 5
  Console timeout 0

  dhcpd 192.168.0.1 dns
  dhcpd outside auto_config
  !
  dhcpd address 192.168.10.21 - 192.168.10.240 inside
  dhcpd dns 192.168.20.21 83.147.160.2 interface inside
  paybackloyalty.com dhcpd option 15 inside ascii interface
  dhcpd allow inside
  !
  dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
  dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
  dhcpd update dns of the wireless interface
  dhcpd option 15 ascii paybackloyalty.com wireless interface
  dhcpd activate wireless
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal Payback_VPN group strategy
  attributes of Group Policy Payback_VPN
  VPN - 10 concurrent connections
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
  attributes of Group Policy DfltGrpPolicy
  value of 83.147.160.2 DNS server 83.147.160.130
  VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
  internal GroupPolicy_84.39.233.50 group strategy
  attributes of Group Policy GroupPolicy_84.39.233.50
  VPN-tunnel-Protocol ikev1, ikev2
  Noelle XB/IpvYaATP.2QYm username encrypted password
  Noelle username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
  Éanna attributes username
  VPN-group-policy Payback_VPN
  type of remote access service
  Michael qpbleUqUEchRrgQX of encrypted password username
  user name Michael attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
  user name Danny attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
  user name Aileen attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
  Aidan username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  shane.c iqGMoWOnfO6YKXbw encrypted password username
  username shane.c attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Shane uYePLcrFadO9pBZx of encrypted password username
  user name Shane attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, encrypted James TdYPv1pvld/hPM0d password
  user name James attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Mark yruxpddqfyNb.qFn of encrypted password username
  user name brand attributes
  type of service admin
  username password of Mary XND5FTEiyu1L1zFD encrypted
  user name Mary attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
  Massimo username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  type tunnel-group Payback_VPN remote access
  attributes global-tunnel-group Payback_VPN
  VPN1 address pool
  Group Policy - by default-Payback_VPN
  IPSec-attributes tunnel-group Payback_VPN
  IKEv1 pre-shared-key *.
  tunnel-group 84.39.233.50 type ipsec-l2l
  tunnel-group 84.39.233.50 General-attributes
  Group - default policy - GroupPolicy_84.39.233.50
  IPSec-attributes tunnel-group 84.39.233.50
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the pptp
  inspect the rsh
  inspect the rtsp
  inspect the sip
  inspect the snmp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect xdmcp
  inspect the icmp error
  inspect the icmp
  !
  service-policy-international policy global
  192.168.20.21 SMTP server
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

  ASA 2

  ASA Version 9.0 (1)

  !

  Payback-CIX hostname

  activate the encrypted password of HSMurh79NVmatjY0

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  Description this port connects to the local network VIRTUAL 100

  switchport access vlan 100

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  switchport access vlan 100

  !

  interface Ethernet0/4

  switchport access vlan 100

  !

  interface Ethernet0/5

  switchport access vlan 100

  !

  interface Ethernet0/6

  switchport access vlan 100

  !

  interface Ethernet0/7

  switchport access vlan 100

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 84.39.233.50 255.255.255.240

  !

  interface Vlan100

  nameif inside

  security-level 100

  IP 192.168.100.1 address 255.255.255.0

  !

  banner welcome to Payback loyalty - CIX connection line

  passive FTP mode

  summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group defaultDNS

  Name-Server 8.8.8.8

  Server name 8.8.4.4

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the host-CIX-1 object

  host 192.168.100.2

  Description This is the VM server host machine

  network object host-External_CIX-1

  Home 84.39.233.51

  Description This is the external IP address of the server the server VM host

  service object RDP

  source between 1-65535 destination eq 3389 tcp service

  network of the Payback_Office object

  Home 92.51.193.158

  service object MSQL

  destination eq 1433 tcp service

  network of the Development_OLTP object

  Home 192.168.100.10

  Description for Eiresoft VM

  network of the External_Development_OLTP object

  Home 84.39.233.52

  Description This is the external IP address for the virtual machine for Eiresoft

  network of the Eiresoft object

  Home 146.66.160.70

  Contractor s/n description

  network of the External_TMC_Web object

  Home 84.39.233.53

  Description Public address to the TMC Web server

  network of the TMC_Webserver object

  Home 192.168.100.19

  Internal description address TMC Webserver

  network of the External_TMC_OLTP object

  Home 84.39.233.54

  External targets OLTP IP description

  network of the TMC_OLTP object

  Home 192.168.100.18

  description of the interal target IP address

  network of the External_OLTP_Failover object

  Home 84.39.233.55

  IP failover of the OLTP Public description

  network of the OLTP_Failover object

  Home 192.168.100.60

  Server failover OLTP description

  network of the servers object

  subnet 192.168.20.0 255.255.255.0

  being Wired network

  192.168.10.0 subnet 255.255.255.0

  the subject wireless network

  192.168.40.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the Eiresoft_2nd object

  Home 137.117.217.29

  Description 2nd Eiresoft IP

  network of the Dev_Test_Webserver object

  Home 192.168.100.12

  Description address internal to the Test Server Web Dev

  network of the External_Dev_Test_Webserver object

  Home 84.39.233.56

  Description This is the PB Dev Test Webserver

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_2

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_3

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_4

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_5

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_6

  service-object MSQL

  service-object RDP

  the Payback_Intrernal object-group network

  object-network servers

  Wired network-object

  wireless network object

  object-group service DM_INLINE_SERVICE_7

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_8

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_9

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_10

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_11

  service-object RDP

  the tcp destination eq ftp service object

  outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

  Note to access list OLTP Development Office of recovery outside_access_in

  outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

  Comment from outside_access_in-access Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

  Note to outside_access_in access to OLTP for target recovery Office Access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

  Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

  outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

  Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

  outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

  Note to outside_access_in access from the 2nd IP Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

  outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

  NAT (inside, outside) static source Development_OLTP External_Development_OLTP

  NAT (inside, outside) static source TMC_Webserver External_TMC_Web

  NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

  NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

  NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  Enable http server

  http 92.51.193.156 255.255.255.252 outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 92.51.193.158
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 92.51.193.156 255.255.255.252 outside
  SSH timeout 5
  Console timeout 0

  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal GroupPolicy_92.51.193.158 group strategy
  attributes of Group Policy GroupPolicy_92.51.193.158
  VPN-tunnel-Protocol ikev1, ikev2
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  tunnel-group 92.51.193.158 type ipsec-l2l
  tunnel-group 92.51.193.158 General-attributes
  Group - default policy - GroupPolicy_92.51.193.158
  IPSec-attributes tunnel-group 92.51.193.158
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
  : end

  Hello

  There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

  All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

  Here are a few suggestions on what to change

  ASA1

  Minimal changes

  the object of the LAN network

  192.168.10.0 subnet 255.255.255.0

  being REMOTE-LAN network

  255.255.255.0 subnet 192.168.100.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

  Other suggestions

  These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

  PAT-SOURCE network object-group

  source networks internal PAT Description

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  no nat (wireless, outdoors) source Dynamics one interface

  no nat (servers, outside) no matter what source dynamic interface

  The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

  Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

  network of the SERVERS object

  subnet 192.168.20.0 255.255.255.0

  network of the VPN-POOL object

  192.168.50.0 subnet 255.255.255.0

  NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

  no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  ASA2

  Minimal changes

  the object of the LAN network

  255.255.255.0 subnet 192.168.100.0

  being REMOTE-LAN network

  192.168.10.0 subnet 255.255.255.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM.

  Other suggestions

  PAT-SOURCE network object-group

  object-network 192.168.100.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

  Hope this makes any sense and has helped

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• Cisco's NAC agent does not

  Hey guys! My school uses the Cisco NAC Agent for security on our network, but it gives me problems at the moment. My Windows is fully updated, a mandatory requirement. However, I have done some Windows updates automatically for a while now, and I spent the last few hours manually, download, installation, System Restore to a date in the past and then redownloading, etc..

  I'm in my third year on that campus, and I always had minor problems, which none has caused me a problem until now. I'm not sure what the underlying problem is, and I don't know if this is a common problem for this stage, but I was hoping that I could receive aid better here that guys in the student technology services desk. I am working from my laptop on campus wireless, but this isn't helping me get my Office Online

  I have attached the newspaper report of Cisco of the packer.

  Hello

  We can see the agent to tell you:

  "Your computer is missing one or more critical updates. Run Windows Update and check that you have all critical patches installed. »

  And it's true that Agent to do some checks which is a failure.

  Now these controls check some registry keys related to Internet Explorer and a few other internal items.

  Unfortunately, it is that your network administrator which should help you to solve this problem, because the application of the NAC Manager will have a detailed report of what exactly a failure in your machine and then the requirements are changed to allow you to access or your machine must comply with the requirements.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• Critical error report Wireless has any ideas?

  Hi people,

  I partially solved my problem of USB (it disappeared) now after doing a report of wireless network Test, I find that

  Although the wireless it is pass the wireless work is a failure, which then told me, it's a 3 * critical issue & contact

  HP, of course I am out of warranty and will it cost me to call HP engineers.

  Is the wireless is not a replacement part or system problem?

  Clues?

  Hello

  Part number of your wireless printer module 1150-7931 failed. Contact technical support. They can help you, so it is worth contacting them.

  Here is a link to th HP technical support case call form

  http://goo.GL/w7Hgh

  Here is a link to find the phone number for Support outside the United States. http://goo.GL/qHlWX

  Inside the United States, call 1-800-474-6836

  Best regards

  ERICO

• Error when trying to print to a pdf and network printer

  Hi all

  When you try to print a report to my network printer or pdf format, I get committed two errors, one right after the other.  The PDF or printed has almost everything, with the exception of three tables which is totally absent.  When I'll be back in the report and open the page with the missing table, the table is no longer visible in the report and I get the second error once again.  Tiara of exit and restart back tables.

  I found several threads on pdf and other printing errors and tried solutions without success. specifically the one posted here.

  I hope there is a solution to this!  These reports are intended to sell management on tiara! Thank you!

  News of the OS:

  Windows 7 64-bit SP1

  18 GB OF RAM

  Tiara Info:

  Version: 11.3.0f4563

  USI: 1.9.1f4681

  DataFinder: 3.0.0f4681

  Script engine:

  5,5,0,5207

  Debugger: 6,0,0,8424

  I was able to print to PDF format with no omissions by manually adjusting the format string for each table of the column in the report.