WAP4410N existing other than Cisco network gateway

Similar Questions

• With the help of Cisco ACS 5.2 (GANYMEDE +) with other than Cisco devices

  Hi all

  I was hoping that someone could help me with what might be a silly question. I'm trying to implement a solution whereby an operator can control all their nodes (other than Cisco) network via GANYMEDE + involved nodes are

  Juniper M10i running Junos 9.2, M120

  M320 running Junos 8.5 Juniper

  Extremes of BD8810 and BD8806 running 12.4.1.17 XOS

  3804 Alpine extreme Extremeware 7.8.3.5 running

  My question is, can I use Cisco ACS 5.2 (or 4.2) to authenticate using GANYMEDE + to these other than Cisco devices. Has anyone else done this or I have to use RADIUS? If someone has done this are problems of interoperability with Cisco CS and Junos or XOS extreme. Thank you

  / John

  John,

  We have a very large deployment of Juniper (T-series, series MX, etc.). We use Cisco ACS and GANYMEDE to manage these devices. The configuration of the ACS is fairly simple. You'll want to create users to connect and match them to the classes on your JUNOS routers. Here is an example:

  set system login user uid of engineering 2000
  Set system login user engineering genius-class class
  set the connection user uid to NOC 2001 System
  Set system login user AC AC-class class

  define the system connection Engineering-class idle-timeout 15
  define a connection system class engineering-class permissions all
  define the system connection AC-class idle-timeout 15
  define the connection class AC system class view permissions
  Set connection AC-class permissions see the system configuration

  We use two classes of genius and NOC. One is defined as a read / write and the second read-only. This is in turn then mapped in ACS (in our case version 4.2) by user or group (preferred). First, you change the configuration of the interface and add a Ganymede junos-exec service and do not enter the Protocol field. Then, you change the attributes of the user group. I've attached screenshots for both on this subject.

  Hope this helps.

  Derek

• Route VPN site to site on one path other than the default gateway

  I want to route VPN site-to-site on one path other than the default gateway

  ASA 5510

  OS 8.0 8.3 soon

  1 (surf) adsl line interface default gateway

  line 1 interface SDSL (10 VPN site-to-site)

  1 LAN interface

  What's possible?

  Thank you

  Sorry for my English

  Here is the assumption that I will do:

  -Your IP SHDL is 200.1.1.1, and the next hop is 200.1.1.2

  -Your LAN-to-LAN ends on this interface (interface card crypto SHDL)

  -VPN peer 1 - 150.1.1.1 and LAN is 192.168.1.0/24

  -VPN peer 2 - 175.1.1.1 and LAN is 192.168.5.0/24

  This is the routing based on the assumption above:

  Route SHDL 150.1.1.1 255.255.255.255 200.1.1.2

  Route SHDL 175.1.1.1 255.255.255.255 200.1.1.2

  Route SHDL 192.168.1.0 255.255.255.0 200.1.1.2

  Route SHDL 192.168.5.0 255.255.255.0 200.1.1.2

  Hope that helps.

• ISE web auth for other than cisco switch (D-link 3528)

  Is it possible to use ISE (posture inline node) to redirect to portal comments ISE wired users?

  And wired users will get full network access after they pass the web auth.

  Hello

  Theoretically, it could work if the switch is able to send all the attributes in accounting packets, such as IP address and mac address by asking the station id. If the attributes are missing or incorrect, the iPEP ISE will never create the session (see show pep session table).

  That said, who probably never have been tested, so you may want to reconsider your design, there is no guarantee that this can still work.

• I would like to have access to an email account different, existing other than the default e-mail account in Thunderbird.

  I'm sure it's a simple question, but I can't understand how do. What are the steps?

  Start here: https://support.mozilla.org/en-US/kb/automatic-account-configuration

  If this isn't what need you, let me know.

• vSphere HA detected that this host is in a network other than the master vCenter Server is connected

  Hi all

  I try to install a vSphere 5.1 environment (vCenter 5.1 (799731))... It has never been so difficult to get a VMware product running.

  
  Problem:

  As soon as I create a Cluster HA (with 2 ESXi 5.1 (799733)) I get the message:

  "vSphere HA detected that this host is in a network other than the master vCenter Server is connected"

  I tried everything...

  vCenter place in other networks

  Multihomed vCenter

  Place the vCenter in the same network as the ESX host

  Doublechecking ip, subnets, gw, name resolution, vSwitches

  nothing done... is this a bug?

  vCenter and also the two hosts of ESXi now resides in the same L2 network.

  ESX1: 10.254.250.74 255.255.255.0

  ESX2: 10.254.250.77 255.255.255.0

  VC: 10.254.250.29 255.255.255.0

  The message may not be correct.

  Please... @ someone out there... Help! I'm at the end of my knowledge.

  Concerning

  Adrian

  You can check the configuration of VLANS on your physical switch?

  Mike

• Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a corporate environment...

  Original title: Netbook Licensing

  Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a business, connected to the server environment to share files?

  I read somewhere that these permits cannot connect to a domain, is this true?

  Of coz these OS has not input parameters are even to join a domain, how can they connect?

  CAN, that my understanding of that statement means that it cannot be connected to a domain server, means that the netbook cannot be connected to the server to access files shared server?

  Can the netbook share files with other computers (vice versa), other than a domain server, on a network of companies?

  So what my final question is a netbook can exist in an enterprise environment? What's a standalone machine?

  I'm not able to get an answer very Microsoft Singapore confirm after the call to them.

  Hello

  Computers running Windows 7 Starter Edition cannot connect to a domain.

  Reference: Networking in Windows 7 Starter

• Help with M6348 connecting to a Cisco network

  Hello

  Can someone help me with best practices by putting R710 via a M6348 stacked with a cisco network.

  Our configuration is the following

  M1000e

  2 x 1 GB pass-through fabric a

  2 x M6348 wired in a pile in the B fabric

  6 x popular R710 with four NIC ports in the fabric B (3 are general purpose servers, 3 are Hyper-V servers in a cluster)

  Cisco network

  For most of the Cisco 3560 switches

  20 VLAN (1 per building) configured, mainly for the isolation of traffic (VLAN 300-320)

  What (I think) that we want to

  The M6348 connect to the core network in a SHIFT (4 x 1 GB ports. Can it be divided 2 ports each of the stacked M6348?)

  Have a mapping of right for 1-3 to VLAN 301 R710

  Configure R710 4-6 for access to all VLANS for the Hyper-V hosts can be placed on the VLAN correct

  Use the fabric for the connection to the San

  Network management is carried out by a third party (we are unable to change this) and they claim that they are unable to connect Cisco/Dell!

  We are server guys, guys network no, so something stupid (especially for Cisco to give to our management company) would be appreciated.

  We tried to configure the switches in Simple mode, using a Dell deployment guide, but all we seem to get is the default VLAN to all ports on the switch 1 battery, but no other VLAN and no active port 2 in the stack.

  I've probably missed lost info on and were not very clear, so if more info is needed, please get back to me.

  Thanks in advance for the help

  Rich

  Thanks for the information updated, actually, this confirms that the problem is with the connection to the Cisco switch. Is that what we tried a general link, instead of trunk?

  mode console # switchport general

  Console # switchport General allowed vlan add 300-320 tag

  Console # pvid General switchport 301

  Console # end

  Are we sure that the VLAN 301 IP address is 10.49.56.0? This doesn't seem fair.

  When we try to pings on the trunk/General connection to the Cisco switch, make sure you that the servers have the default gateway defined on the VLAN IP address they are in access mode. Thus, when in the access mode VLAN 301 the gateway server would need to be 10.49.56.0. I would like to verify that the IP address, however.

• After update I can not open Web sites other than facebook and youtube on my mac? Help! He says: connection refused.

  Hey after update of OS X El Capitan my laptop is unable to connect to internet via wifi except a few sites as Facebook and Youtube other than that none of the Web sites open on one of the browsers I tried to reinstall it but nothing happened, wifi works fine on all my other devices and internet are functioning normally If I connect to my mac on a LAN Port. Help why this phenomenon happens?

  Open System/Network preferences window and click on the Advanced button.  In the next window, click on the DNS button and see what is listed as a DNS server.

  You can try to use the OpenDNS servers by entering these two addresses:

  208.67.222.222

  208.67.220.220

  Save the changes, restart and relaunched Safari.  If you delete these addresses the default address will be back.

  

• My default search engine has been on anything other than Google. How to switch this back?

  Somehow my default search engine has been changed to Google to what is called "My Web Search". I want to switch to Google, but I can't figure out how. I disabled the plugin and removed my options of search engine in the top right, but nothing has changed.

  You have My Web Search installed; Look under Tools > Modules > Plugins. He could have grafted in on something that you have installed. Always seek and opt-out when installing other programs and Add-ons that you install from sites other than the site of Mozilla Add-ons. My search on the Web is considered malware/adware/spyware by many. You must remove it.

  Step 1. You can check if you have one of these installed ' Fun Web products ' :
  Control Panel > add or remove programs: Ask.com Bar, my search bar, of the MyWay Bar speed, my search on the Web Bar, Fun Web products Easy Installer
  See:
  http://www.safer-networking.com/removemywebsearch.php
  PC Hell: My Web search removal Instructions
  http://helpint.MyWebSearch.com/intlinfo/help/toolhelp.jhtml#Q3
  http://support.Mozilla.com/en-us/KB/troubleshooting+plugins#Manually_uninstalling_a_plugin

  Step 2 You may need to change a preference to reset your default URL/location bar search engine:
  -Enter Subject: config in the URL/address bar and press the Enter key
  -If you see a cautionary, accept it (promise you'll be careful)
  -Filter = keyword.url
  -Under the filter, right-click on the keyword. URL and choose "Reset".
  -Restart Firefox (file > restart Firefox)
  See: http://kb.mozillazine.org/Keyword.url

  Step 3 You may need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the ' | ' symbol.
  See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  You ~ ~ Red:PEUT~ ~ need to update Adobe Reader for Firefox (aka Adobe PDF plug-in for Firefox): your worm s/o; current version 9.3.3 (updated security important release 29/06/2010; See: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
  ~ ~ Red: check your version here ~ ~: http://www.mozilla.com/en-US/plugincheck/
  See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
  ~ ~ Blue:you may be able to update to Adobe Reader installed on your system~ ~ instead of going on the Adobe site and download. Open the Adobe Reader software installed on your system (in Windows, start > Program Files, find and click on Adobe Reader to open the), click Help, click Find updates. Allow the download / update to occur. If you use this method, no need to proceed with the instructions below, but look at the two downstairs bulleted items ""NOTE for IE:"and" see also: "." Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
  ~ ~ Blue:If you go to the Adobe site to download the Adobe Reader course:~ ~
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  ~ ~ Red:-see the images at the bottom left of this post to see the steps on the Adobe site ~ ~
  -the release of Firefox (file > exit)
  -In Windows: make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -In Windows: double-click the installer for Adobe Reader you just download to install/update Adobe Reader

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses a version of ActiveX. To install/update the IE ActiveX version, the same instructions as above, except use IE to download the ActiveX Installer. See: ActiveX
  • See also: http://kb.mozillazine.org/Adobe_Reader ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• He also just on my screen that someone other than the same IP address as me, what should I do to change?

  was informed someone else that my IP address whay I can do

  It also comes on my screen that someone other than the same IP address as me, what should I do to change

  Hi marionnaismith,

  I suggest watching this thread, because it is similar to what you feel:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-has-detected-an-IP-address-conflict/e43f2512-10cc-49E8-9500-831f9892f8dd
  Also, here is an article from Microsoft that provides much more detail on this issue, if necessary:
  http://support.Microsoft.com/kb/120599

• 8620 print any materials other than test page

  Hi all

  Just hung up a 8620 on wireless and everything communicates and the printer test pages work fine. The question cannot print other documents, it goes to the printer says print then does not. It's with anything other than diagnostic pages printed from HP or coil the printer test page.

  It shows in the coil and then disappears, never to be printed. I signed up for ink instant is this cause a problem? This shouldn't be something I need to go into windows to repair. I ran the fix HP software that it says that the printer is not yet on the network, but prints the test pages, as is recognized by all programs. Printer is set as default as well printer. May need to return this thing, I need it for my business and my other printer never had these problems. It's instant ink which was interesting for me.

  Hi TACFirearms,

  Welcome to the Forums of HP Support! I see your will HP Officejet 8620 does not print it goes to the spooler and then stops, I would like to return to the top and print, but require a bit more information:

  1 it IS all programs or a certain?

  2. What is your current version of the Windows operating system?

  3 have you tried to plug in a USB key?

  4. do you get an error message when you try to print?

  If you have a Windows operating system later than XP, please start here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know what the PSDR find, I'll watch for your reply.

  Thank you

• BEFW11S4 configured as network gateway

  I have a local network my ISP between several PCs connected to it and a printer's existing compatible network using CAT 5 connection to the router. I would like to printer connection to the wireless LAN and want to use my BEFW11S4 as the 'bridge' to the LAN, can I configure this device as a "network bridge" and if yes how can I do that?

  No it's not possible to do this work of router as a network bridge by using the Linksys firmware on it. Maybe you can try the firmware of 3rd party like DD - WRT, who have the opportunity to make the router as a network gateway.  But make sure that during the download of the DD - WRT one firmware on your router, you follow the proper procedure, otherwise it will damage your router.

• My tab 'Options files and research', 'Task Manager ', 'Run' & browsers other than windows explorer is hidden and not accessible. Emergency assistance is needed.

  As I said in the title, my problem is that I am not able to acess file and Search tab 'Options', ' Task Manager ', 'Run' & browsers other than windows explore.

  1. in the case of a tab 'Folder and search options' in the tab to organize, in the Explorer window, the tab appears as the hidden and cannot be clicked. The same"Folder and search options" when I looked in Control Panel, the icon was not seen or available.

  2. the same is also the case for the Task Manager. In the click right option on the taskbar displays the"Task manager" tab, but it seems to also be hidden or accessible when I press alt + ctrl + del window shows no option Task Manager or the tab.

  3. when I tried to run ' run the command ' the command window does not come and the following message appears.

  "Windows cannot find"C:\Windows\System32\cmd.exe". Make sure you typed the name correctly and then try again. »

  4. in a similar way when I tried to acess or run the Fireox internet browser, Google chrome and safari browser he showed asimilar message as illustrated tried to reinsall above.i browsers. It is renstalling, but the same error message appears after the reinstalling.   butthere was no problem in access of Microsoft Internet Explore.

  Windows Internet explore, the homepage has changed automatically and it opens the homepage given below.

  http://6-c-c-n-0.-u-.i-k-r-g-1-0-u-5-1-f-3-g-Li-9-p-1-x-t-6-g-l-8-m-q-y-s-k-6-l.info

  I am currently using the Microsoft Security Essentials as my Antivirus which is uptodate. Run full scans with antivirus but the scans is not revealed. Also, I'm a windows user who is also updated regularly.

  So far, I noticed only these problems that make me very difficult to work. The main problem is that I'm not in a situation to format my laptop. Please help me with these problems.

  Hello

  Restart in safe mode and run the antivirus scans here. You have symptoms of an infected machine. Scanning in safe mode will reduce efforts of the virus to avoid detection.

  To restart in safe mode, restart normally, and when the system resets you can press the F8 key. It is point immediately after the screen logo POST or manufacturer initial of the system, and just before Windows starts to load. This will give you a boot menu where you can choose Safe mode.

  While you're here, you must also download and run the tool free malwarebytes here:http://www.malwarebytes.org/ (choose Safe mode with networking to do this). He can catch something that lack of MSE, no security tool is perfect.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• New dv7t Win7 64-bit cannot access other than XP

  Hi all

  My new dv7t notebook Win7 64-bit cannot see a XP PC on my home network. This is strange, exasperating er, is that he could yesterday. In short, what worked yesterday does not work today.

  * XP - Computer Office SP3 is connected to Linksys WRT54G v8 (latest firmware)
  * Office XP shared a connection USB Canon i960 printer
  * Computer laptop Win7 is wireless connected to the WRT54G
  * Internet connection is fantastic.

  Yesterday, I added the canon printer to the laptop Win7 using the trick of local port: Port Local = \\winxp1\canoni960. It worked great; documents and test printed pages. Yesterday, I could see the shared printer on the XP.

  In addition, Office XP has appeared in my Win7 network. Yesterday, I could see her and you connect to it, for example, Start-> Run-> \\winxp1 worked.

  Today, nothing. It does not - and I spent most of the last 15 hours trying to make it work.

  On laptop Win7...

  * passes the 'Home' network 'work '.
  * changed the workgroup on Win7 to match XP: both are now member of the Working Group "MSHOME".
  * the portable Win7 removed from the "homegroup".
  * WiFi dropped and re-created
  * tinkered with different combinations of parameters in 'Advanced sharing settings.
  * ' net view' raise an error "system error 6118 has occurred. The list of servers of this working group is not available. "Bad news: Win7 system can even see itself.

  I tried hundreds of others suggestions collected on the Windows 7 forum. None worked.

  I'm puzzled. I don't know what to try next, other than to return the thing to the original image.

  If you know or suspect that happens and how to solve this problem, I will be highly grateful.

  Thank you.
  Paul

  It was an update of Norton Internet security that got killed.

  He fixed it.

  https://Sonos.custhelp.com/cgi-bin/Sonos.cfg/php/enduser/std_adp.php?p_faqid=407