no sign of auto in the start

Similar Questions

• I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  Hi richardcollis,

  You did changes to the computer before this problem?

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.

  Please post back and we do know.

• app to auto-launch at the start of the device

  I need to run my application at startup of the unit. How to get there. I did a lot of research but doesnot find a good solution. I also tried to implement SystemListener and its different methods, but not the solution as powerUp() and powerOff() method is not called on device turns on or off. I have also tried to change the descriptor and setting auto run on startup but help out me. I ask everyone to please solve my problem as soon as possible because it is very urgent for me. Thanks in advance.

  With the help of which IDE is you you are developing the application... Is - this BlackBerry JDE or using Eclipse...

  If it's BlackBerry JDE then right click on your project and go to properties->, tab Application-click-> and select the check box for system Module & Auto Run on Start Up.

• Satellite C855 stuck on the preparation of the auto repair when starting

  My laptop has been slaughtered like this for two days now. I have searched and tried all sorts of sites re come rations, but nothing seems to work. I tried the F2 button that takes me to the Setup utility, but no start in the safe mode option is there. So I tried the F12 key and tried the boot menu, but nothing works either.

  Do - what I need to do to solve this problem, I don't have the startup disk?
  Can I recover my data from the hard drive?

  What system you have, and it's a factory system pre-installed?

  In case you have a system Win 8, follow this work around:
  Turn on the unit and press F12
  Now you should see the start menu. The last option should appear as a HARD drive recovery.
  Choose HARD drive recovery and begin the process of recovery which would fix the laptop back to factory settings.

  But be careful: in this case the HARD disk will be formatted and you will lose data.

  In the case of Win 7, try this:
  Turn the unit on and press F8
  Now choose fix my computer
  Here, in the new window select Toshiba HDD recovery.
  This will start the recovery process and will the laptop to factory settings.

• Unable to complete the start-up and it auto shuts down

  all web services I use (chrome, safari, and Fox) could not load sites.  I decided to restart, but during the start of it, the grey sovereign would move but itll stop. When this happens, the system automatically stops. I tried everything, but it still does nothing.   someone has the same problem?

  I've tried everything

  Care to share?

  Please give details of ALL you have done so far in the way of troubleshooting?  Need this info to avoid scenarios of summer does .

  iOS 9.0.2

  iOS is for mobile devices.  Care to share what OS you use?

  

• Auto fill time system for the start/end OTL book times

  Hello
  
  Y at - it a default option the time-card output once at the time of the system.
  Say on the card, a default button is the start time and end-time(and have these as read-only).
  
  Is this possible in OTL with preferences?
  
  The customer wants-away with the score clocks all together. If such a feature is available in OTL.
  
  TIA,
  VB
  
  Published by: VB on June 13, 2011 17:39

  VB,

  You can not add logic in layouts automatically fill the time based on the clock. You will have to depend on a custom process to do.

  Less than entry delay is also day, not week. Look at the configuration of your test employee preferences.

  -Shiv

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• Skype 7.14.0.106 "sign me up when Skype starts".

  Looks like Skype 7.14.0.106 the option ' to sign me in when Skype starts "disappeared. Normally disable it for security reasons. However, the last update (7.14.0.106) the option is not on the login screen more and I can't find it in the Skype or another option. (Used generally for settings)

  Can anyone help?

  Thank you

  This option is not available in the version 7.14 , but you can find this option in the tools of-> Options-> General settings if you update your Skype to the currently latest version 7.15 .

  http://www.Skype.com/en/download-Skype/

• Sign Me In when Skype starts is grayed out

  Hi all

  PC running Windows 7. My updated Skype updated to 7.17 on 1/8 and now today 7,18. Since the 7.17 install, my credentials are no longer save and "Sign me in when Skype starts" is grayed out and I can't check. My username will save even more. In addition to this, whenever I connect now, I receive notifications about files sent by someone who sent me a weeks file, and he keeps asking me to configure my camera. I tried to uninstall, delete the folder appdata and reinstalling several times, but no luck.

  You have very restrictive of the defined policy settings. I guess you see something similar to this:

  http://community.Skype.com/skypec/attachments/skypec/Windows/356381/1/asdfsdf.jpg

  The key that prevents to create the profile folder is the one named MemoryOnly. You can remove this key or change the value to 0.

  If you see a key named DisablePersonalization, and then delete this key too or change the value to 0.

• ReadyNAS Duo v2 impossible to access the start menu

  Hello

  I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.

  So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(

  I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.

  Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)

  Thanks for your help!

  Hi lakano,.

  Welcome to the community!

  Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.

  Kind regards

  BrianL
  NETGEAR community team

• Error message at the start of "RunDLL" entry missing what it means and how do I solve this problem? Please notify.

  my computer gives me an error at the start of Windows\system32\spool\drivers\W32X86\DLCJtime.dll "entry missing RunDLL" in addition, my Windows XP screen changed on its own after this message began to appear. Instead of getting the original Windows XP sign - on, it gives me a black screen with a box for the username and password.

  Please help.

  Bonita

  Dell printer?  See http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=jm&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true

• The start menu has disappeared from the computer... With explore 7 and the upper part is not constant either. No miracle solution?

  The start menu can only be achieved by using ctrl and esc.  Sometimes, it would be great if they kept things simple.

  Hello coinfused,

  Thank you for visiting the Microsoft answers community.

  The taskbar is visible? Usually when you ctrl + esc and get the start menu, it means that the hide feature is automatically enabled for the taskbar.

  ·         Move your mouse to the bottom of the screen, the taskbar expected popup.

  ·         Right-click on the taskbar visible now and left click on properties.

  ·         Search for auto-hide the taskbar, uncheck the box in the box and click ok.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The start menu and the task balk disappeared

  On my windows XP the task and menu balk start screen disappeared as a result of a mouse click. "Just the icons on the side right.<" remained.="" what="" should="" i="" do="" to="" get="" the="" balk="" back?="" any="" help="" will="" be="">

  Hi janavasiljev,
   
  This problem can occur for the following reasons:
  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.
  • The core files are damaged.
  • The Explorer.exe file does not load at startup.

  Make sure that the hide option automatically is not selected for the taskbar and Start Menu Properties.

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  For more information, see:

  Start menu and taskbar Windows are missing after you upgrade to Windows XP

• Post Virus left side of the Start Menu is empty - XP Home Edition

  Although I had (have) Microsoft Security Essential under my protection against the virus, I have acquired the Virus from Windows XP Recovery. Although there are long, I lost the functionality of system restore using Spybot, Malware bytes and MY, I think I've eradicated the virus. I use the computer in normal mode, and it seems to work normally. However, all elements previously available on the left side of the start menu, including MS Word, are no longer.

  I use a version of MS Office 2003. I can access MS Word documents stored on the computer and laboriously open a new Word document like this, but I get a message that there were a change in the model when I try to close any Word document. The guest in Tools/Options/save message is not checked and no auto-macro display in the macro area.

  Editing the registry is above my pay grade and I don't have the disks of office. Two questions: 1) any suggestion (s) rather than buying another copy of Microsoft Office?, and 2) what are the chances that I actually eliminated the virus?

  Thanks in advance for any help,

  Dave

  See if the following can help. Lira entire thread.

  (Hidden?) missing files after you remove the virus from windows recovery

  http://forums.CNET.com/7723-6132_102-525986.HTML?tag=contentBody;threadListing

• RUNDLL error is displayed at the start of each time.

  When I start, this message appears in a small window, I usually just close it, but I want to get rid of it and find out if there is no danger. The message is:

  RUNDLL error loading C:\PROGRA~1\3721\helper.dll the specified module could not be found.

  I looked on the internet but I can't find any solution. I havn't made the latest changes to my laptop.

  System information:

  Microsoft Windows XP Professional Version 2002 Service Pack 2

  Please, any help would be greatly appreciated.

  Thank you

  http://www.pcreview.co.uk/forums/thread-428084.php

  Helper.dll and the specific load error are associated with
  spy | Adware. Better to download and install AdAware and Spybot.
  Activate files and hidden folders and then scan the system to remove the
  parasites.

  Read the info above about helper.dll by mow green MVP...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner