RUNDLL error is displayed at the start of each time.

Similar Questions

• Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found.

  While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  ........ Content of the lead in double...

  I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.

  Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  Hi Barry,.

  Sorry for the late reply.

  The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.

  How to repair or reinstall Internet Explorer in Windows

  https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0

  Keep us informed on the issue.

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• igfxext module has stopped working message is displayed at the start of Windows 7. What is c?

  igfxext module has stopped working message is displayed at the start of Windows 7.  What is this and how can I fix?

  Hi Bob Bala.

  
  Thanks for asking this question to Microsoft Community!
  
  As I understand it you receive a startup message all to connect to the computer.

  He would be grateful if you can answer these questions to help you further.

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?
  
  I would suggest trying the following methods and check if it helps.
  
  Method 1:
  
  You can try to check if the problem occurs in safe mode and check if it helps.
  
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Method 2:
  
  If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.
  
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
  
  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.
   

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Errors are displayed in the event viewer whenever I'm pass user

  Greetings.

  I just installed Windows 8 on my PC and noticed a strange thing. I have 2 local accounts on my PC, and whenever I am pass between them an error message popping up in the event viewer.
  It's always the same:
  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.
  And details:
  
  
  -

  -

   

    10016

    0

    2

    0

    0

    0 x 8080000000000000

   

    1301

   

   

    System

    PC

   

   

  -

    application-specific

    Local

    Activation

    {D63B10C5-BB46-4990-A94F-E40B9D520160}

    {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

    NT AUTHORITY

    SYSTEM

    S-1-5-18

    LocalHost (using LRPC)

    Not available

    Not available

  I don't see anything wrong in the behaviour of my OS, but these consistent errors in Event Viewer makes me worry a little.

  What could be the cause of the problem? Is it possible to fix it?

  Hello Andrei Kharitonov,

  1. How did you install to Windows 8?

  2. who was the older version of Windows installed?

  Let us try these methods.

  Method 1.

  I suggest you run the utility for troubleshooting Microsoft accounts from this link and check the status.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Method 2.

  The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To run the System File Checker, you'll need open an elevated command prompt. This can be done:

  • Enter the start screen
  • Press Windows + C keys on your keyboard to show the charms. (If you use a touch screen: touch the right edge of the screen and slide your finger to the center of the screen to display the bar of charms)
  • Click on search
  • Type the command prompt in the search field
  • Click with the right button on command prompt (if you use a touch screen: touch and hold your finger at the command prompt, drag your finger downwards until you see an outline around the tile and finally release your finger on the screen.)
  • Click on run as administrator

  Enter the command: sfc/scannow
  Note: If you use a touch screen you can open the touch keyboard for the command prompt by typing on the keyboard icon in your taskbar near the system tray.

  Let us know if you need assistance with this problem of Windows. We will be happy to help you.

• Satellite Pro L50 - B - no display at the start of

  Hello

  Problems with getting my L50 - B to initialize display. Everything else is running, but the display won't start at all - I just get a full black screen.

  I tried without success to the following:

  (1) connection to an external display to work
  2 power failure), remove battery and discharge of power of the laptop before turning on again
  (3) turning off and on again

  It's a new laptop (~ 2 months), has been fine until a few days ago. Day 1 of her break, I had to reset hard once, then visualize booted up and laptop was functioning normally. Day 2 of her break, I tried everything above, he finally decided to start random BIOS, so I know that the screen itself is not broken. A few reboots later, it booted up fine and I was able to work on it for the rest of the day with no other problems (I was also able to wake from hibernation and the display came on OK). Day 3 of him breaking (today), I can not work at all.

  Any help appreciated!

  Everything is running

  Does that mean exactly?
  How did you know that everything is OK apart from the screen?

  You said that you already checked the laptop as part of the external display and external display even shows nothing...
  For me, this means that this issue is NOT related to the problem of the internal display, but probably with the other party such as RAM, motherboard or GPU.

  However, the laptop is only 2 months old then contact Toshiba ASP also ASAP... the warranty covers hardware problems and from my point of few this issue is causing my hardware fault.

• Satellite C50 - B with Win 8.1 - PXE error is displayed using the UEFI boot mode

  I have a laptop of C50 - b under Win 8.1 and recently needed to boot from a USB stick so finally found the way to do it (missing the start of the first bios menu) and managed to do.

  My problem is same when I returned in the uefi and set the boot order local drive, cd, network, he asks every time that I want to start PXE IP4, IP6 then IP4 and IP6 again. I also disabled secure boot

  I think that a value is missing, when I went to the BIOS and return to the start of IEFU option, but where is the laptop get the setting to tell him to network/PXE boot when the bottom of the list and the wake we LAN is disabled.

  Exactly, secure boot must be enabled in order to boot from the internal HARD disk where the 8.1 for Windows has been installed.

  If you want to boot from external sources (IE USB flash memory stick) you will need to disable secure boot.

• Why won't one of the picture of the user displayed in the Start Menu?

  On our old Netbook, there are 2 users. I am the administrator and my wife is a regular user. I have two of our photos in our profiles and our user accounts. Whenever I start, my picture is at the top of the start menu as it should. When my wife connects and starts, there is no picture in the start menu. I checked three times. All the settings on the two users are the same. Her image appears everywhere else it is supposed to, such as the log on screen, etc. What can I do to get it to show? A clue for you can be its start menu is much greater than mine. By that, I mean it takes more space, has more characters and icons. I checked all the settings too. They are all the same. Thanks in advance.

  Hello

  This problem may be caused due to file system corrupted or damaged user account. I would suggest trying the following steps and check if it makes a difference.

  Step 1:

  I suggest you to scan SFC.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Step 2:

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I get windows did not start and each time that I reboot I get the same thing.

  * Original title: Windows7

  O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great

  In addition:

  Clear CMOS - 3 ways to clear the CMOS - reset the BIOS

  The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below.  Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).

  Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner.   Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.

  Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7

• Need help to calculate the start and end time and place the result in a term like text box

  I did a search on the forum for calculating start and end time and found the code depending on which I am using as a formcalc on the duration field.
  ==============================================================
  Form1. Page1.duration::calculate - (FormCalc, client)
  
  If (HasValue (StartTime) and HasValue (EndTime)) then
  industrial var = Time2Num (StartTime.formattedValue, "h: mm A")
  var = Time2Num out_ (EndTime.formattedValue, "h: mm A")
  If (IN2 > = out_) then
  xfa.host.messageBox ("start time cannot be greater than or equal to the end time.")
  $.rawValue = null
  on the other
  var out_ - IN2 = diff
  $.rawValue = diff/3600000
  endif
  on the other
  $.rawValue = null
  endif
  =============================================================
  
  Then, when I enter for example from 15:30, an hour of beginning and end of 04:00
  
  The duration field will say 0.5
  
  How can I get my form to say 30 minutes instead of placing a decimal?
  
  Secondly, how can I use field models LC where the employee can just type 330 or 03:30 and it automatically based on the computer's clock on time to start 15:30?
  
  Any help will be greatly appreciated.  Thank you.

  Attached is the form for display:

  https://Acrobat.com/#d=f1kxh5qjuow5ujyZduF8OQ

  To view the results in a regular time format, you can use:

  $.rawValue = Num2Time (diff/3600000, "HH: mm")

  For a flexible time entry check this example.

  http://thelivecycle.blogspot.com/2011/05/flexible-Eingabe-von-Daten-und-Zeiten.html

• Regions must display on the same position using time delay

  Hi all

  I use APEX 4.0.2

  I have a page with 2 reports and 3 regions of the chart. Two reports are placed on the left on the page. Graphics one by a parallel with reports (right) need to display on the page. Is there anyway to show the cards one by one, using a few delay time? Is it possible to do like that in APEX?

  Please help me on this...

  Thank you

  Lacombe

  Try this in your DA

  function x(p)
  {
    $("#" + p).show();
    setTimeout( function(){ $("#" + p).fadeOut( 3000
                                              , function()
                                                { switch( p )
                                                  { case "chart_one":
                                                    { x("chart_two");
                                                      break;
                                                    }
                                                    case "chart_two":
                                                    { x("chart_three");
                                                      break;
                                                    }
                                                    case "chart_three":
                                                    { x("chart_one");
                                                      break;
                                                    }
                                                  }
                                                }
                                               );
                          }
              , 6000
              );
  }
  $("#chart_one").hide();
  $("#chart_two").hide();
  $("#chart_three").hide();
  x("chart_one");
  

• hpC309a-computer slows to a crawl after the restart of the impression must each time

  I don't know much about computers, my husband installed the wireless c309a.  The printer seems to work very well even though I have not tried the scannner, but after printing a document, my computer is very slow.  Opening a document may take a few minutes.  The internet is too slow.  I get the error messages often on the internal memory is too low.  I have to reboot to get it to normal and can not keep the printer.  Restart takes about 20 minutes for all the error messages which are erect and things are difficult to close.  Help - I'm a real novice computer, but I know that the problem is the printer / wireless.  I had to uninstall it and reinstall, but that doesn't seem to help.

  It is a program that runs in the background that monitors your printer use (always).  It can severely degrade the performance of your computer, especially if you have very little RAM.

  Go to start, Control Panel, add/remove programs.

  Select the HP Customer Participation program and uninstall it.

  Restart your computer.

  To find out how much RAM you have, click Start, right-click computer, and select Properties.

  On this page, it will tell you how much RAM you have.  512 MB is the minimum, one less is good, too little.

• Project cannot find the files loaded each time.

  When I opened my project, several files are not found during the research/loading phase until the project is actually open, and the "Search _ VI Named" window appears. The window opens in the same directory displayed in the "loading:" field and the file is there. I have to select the file and click OK to load the file manually. This happens for 50 files. It is quite tedious and takes a long time to open and it happens everytime I load the project.

  I tried opening the project, make a backup of all and then closing and reopening, which did not help to solve the problem. I have to mention that I was working on VI of script and modify these files from another project, so I think I might break a link to the project somehow. Does anyone know how I can force the project actually find these files when loading?

  Thanks in advance for the help.

  Thanks for the suggestions everyone. I was able to solve the problem by deleting all files in the project and time them. I had tried before but must have done something different this time.