No signal through Aver H339 Tuner, adapter connection video watch but its very small

Similar Questions

• What should I do to get my pc to play through the TV? Ive connected the two, but still not getting all of the music television.

  Ive connected the two, but don't know how to get the sound to play through the TV speakers.

  Standard graphics cables don't carry audio, you need HDMI cables to the video with audio. If your PC or TV has no audio HDMI capability must come from the audio output jack on the PC and go to the audio in connector on the TV, which is probably phono, so you'll need stereo Jack 3.5 mm to phono plug lead (or 3.5 mm jack on some audio input of your TV is compatible).

  Tricky

• RALink 802.11n Wireless Adapter - connects at startup but the dsiconnects after a few minutes

  Hello

  I have a HP Pavillion DV6-3125SA and just reinstalled Windows 7 Home Prem after installing a new hard drive. Initially everything (including the wireless adapter) had been working perfectly, and then after the last round of updates (as you know that get you about 1 million of updates on the re - install) my wireless adapter started to misbehave. He started sporadically disconnect and reconnect, but now it gets disconnected and remains disconnected. It still works fine at startup. I checked that the driver software is updated, more I also uninstalled and let it automatically re - install. An interesting point to note, is that when I linked to go in Device Manager to disable (and re-enable), Device Manager freezes and unresponsive.

  Someone at - it had a similar problem or know a solution?

  Thanks for your help.

  Megan

  Its a cell phone, right?

  Run windows Update >... settings disable the updates recommended leaving ONLY the important updates for automatic installation.

  Visit the HP support, specific to your model, and then reinstall the chipset and wireless driver

  See if that helps

• Skype on tv through ipad2 with hdmi adapter?

  Is it possible Skype on tv through ipad2 with hdmi adapter? I am attentive 4 my 94-year-old father who has low vision & hoped us could buy the hdmi adapter to use Skype on his big screen tv. It has the Skype app on his tv, but for that we would have a limited use won't have to buy a TV camera. TNX for any suggestion,

  I have connected my iPad 2 to my led TV via an adapter (HDMI) Apple, Skype running AV, it works well. Transfer the image and the sound of the iPad to tv. The microphone is built into the microphone of the iPad 2. I also used the bluetooth headset at the same time, it also works very well.

• New wifi router installed. Why do connect to sites but lose the connection as I browse even though Windows said excellent signal. To deactivate/activate

  New wifi router installed. Because then I can usually connect sites OK but when getting around a site or to another, I lose connection even though Windows said signal is excellent. Toggle heals the problem temporarily. Two tablets under the same roof using wifi even have no problem. There is no consistency in when the problem arises in any session. It happens in Firefox and Thunderbird. Close and restart the program does not help.

  I tried the reset and it was not good. Then I learned that my wife had a similar problem with his ipad I did what I should have done at the beginning, I restarted the router again. Hey presto, problem solved.

  Now, I'm off to eat some humble pie. Thank you, guigs2

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal.

  original title: pictures playing on tv

  I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal. I know that I have selected the right input of the TV. Is there something that I need to set up the laptop to send the signal to the s-video connector?

  Perhaps the following links will propose a few ideas:

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set How to connect my computer to a TV
  http://hookpctotv.com/ PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• My tv is not receiving a signal from my computer when I connect it via cable.

  problems with the computer to the TV.

  my tv is not receiving a signal from my computer when I connect via wires, I unplugged both ends and reconnected without result.

  I see on my computer if she went out a signal?

  Make sure that you connect to the right port.

  http://Windows.Microsoft.com/en-in/Windows-Vista/connect-your-computer-to-a-TV

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.

• Microsoft Virtual WiFi Miniport adapter connection with "no internet access.

  Microsoft Virtual WiFi Miniport Adapter missing (hostednetwork starts but cannot connect devices)

  I upgraded my Windows 7 to Windows 8 Pro and everything worked fine, I was able to host a wifi network using the command "netsh wlan. I have a htc x, it successfully connected to the wireless network on my laptop via the netsh tha.

  But earlier, I have no idea of what happened but no device (for example, my cellphone) is able to connect to the wifi/hostednetwork hosted on my laptop.

  He sees the connection, but still hung on access to 'internet '...

  netsh wlan set hostednetwork mode = allow
  netsh wlan set hostednetwork ssid keyUsage = HP = key persist = "abcdefgh" mode = enable
  netsh wlan start hostednetwork

  I use this command virtual wi - fi with success with 'no Internet', I created...

  someone can help me...!

  Hey,.

  Visit this link:

  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  If you had installed drivers of the network up to date maps, remove this update. It worked for me.

  Check the steps to remove the software update:

  ·        Go to the Control Panel and open Windows Update.

  ·        On the left side, at the bottom of the window, click the installed updates link.

  ·        In the next window, scroll down and select the update of the NIC has installed recently.

  ·        At the top of the window, click the Uninstall button.

• I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  Widget Browser is long gone.  Adobe stopped quite earlier.  The widgets were outdated and 3rd developer were not very keen on keeping them.

  Use the Adobe Exchange panels.

  Or look at jQuery Plugins.

• Problem connecting, Win 7, WPA - PSK (computer think it's WEP). Managed to substitute, but now very unstable connection.

  Hello, I use Windows 7 to my computer. Here wireless signal is encrypted with WPA - PSK TKIP, but my computer could not register as such (he believes that its WEP). I managed to force it to connect, by manually adjusting for WPA - PSK with TKIP (and the correct password) in the control panel.

  However, the connection is extremely unstable. Often, he simply stops working, although the icon says that there is a link. (Note that this window of available connection has a large red cross next to the signal, because he claims that the settings do not match. He just logs occasionally when I start).

  I wonder if there is a way to solve this annoying problem. I don't know what is causing the computer to see the signal as WEP, when it clearly is WPA - PSK.

  Oh, I found what I think, it is the router in the basement: that said on it: Motorola SBS101E.

  PS: I'm not good on the technical stuff (although I understand basic concepts such as network card drivers, etc., don't ask me not to disable or install a protocol without walking me through the steps).

  Thank you!

  As I wrote, your problem is probably related to the adapter wireless in your office. Maybe it's as simple as that requires an updated driver, but it remains to be seen.

  Result of your ipconfig is quite surprising.  Because you are in a university environment, if we cannot identify a problem with your wireless adapter, you may be able to request assistance from the University of the it Department.  See also comments below on the VPN.

  Here - is more as a matter of interest than anything else - what some of your settings mean:

  Wireless network adapter

  • Your card is a Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC (Realtek RTL8188CE 1 x 1 11 b/g/n Wireless LAN PCI Express Half Mini Card Adapter, which seems to be installed on Lenovo ThinkPads).
  • Your card is automatically assigned (usually by the wireless router, but see below) an IP address of 10.92.129.20.  This address is part of what is called a 'Class A' network, which is generally only used by very large organizations (for example, a University).  This suggests that this wireless network is from University wireless access point rather than a router connected to the modem cable into your basement.

    So it is possible that the antenna on your desktop computer wireless card is not in as good a place as your laptop computer to receive the signal. It's especially if your office uses a built-in wireless adapter, with the antenna at the back of the computer under a desk and near a wall. If you try USB wireless adapter for your desktop computer (or an antenna on an extension cord) move the antenna near a window, if possible.

  • The 'default gateway' for this connection (the address of the wireless router) is 10.92.128.1, which is in the same class A network.
  • The DHCP server (which is what affects your IP address card) is 195.130.132.102.  It is a public IP address belonging to Telenet/Pandora, a Belgian Internet service provider.  In almost all wireless home networks, the DHCP server is part of the router, so your situation is very different.

  Virtual private network (VPN)
  What complicates your Internet connection is the fact that you seem to be using a VPN. This is identified as the 'card Ethernet Hamachi.' I saw many posts complaining that the Hamachi software interferes with various other network connections.  For example:

  After the installation of LogMeIn Hamachi, my continuous wireless network connection disconnected from the internet every few minutes. The wireless connection is ok, but trying to access the internet, I get a message to reset the connection.

  Once I got disabling the network Hamachi (Control Panel-> network) connection and Internet-> network connections, everything is back to normal.

  It happens on two different routers, then the router is probably not the problem.

  This happens with the wired connection.

  I use Windows 7 Home Premium SP 1 64 Bit, Hamachi 2.0.3.89, Intel WiFi Link 5300 AGN.

  LINK

  This is beyond my area of expertise.  If you are unable to determine a driver (or hardware) problem with your adapter wireless and you have installed Hamachi VPN software on your desktop and your laptop, assuming that you really need, you need to get help from the support service of some entity required or recommended use of Hamachi VPN software.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• WRT54GS can't connect to IE but can connect to Firefox

  I have recently change DSL broadband through Comcast and I can't get on IE. I can get on IE when I connect my cable modem directly to my computer, but when I connect my cable modem to my WRT54GS it does not connect to IE but I can't get on Firefox. I work at home so I need IE to work. By the way Im using a wired connection.

  Make sure that the proxy settings are disabled in Internet Explorer. You don't need them with a cable Internet connection.

• Can connect to the server (although very slowly) but unable to connect to the internet

  Original title: network connectivity

  I have a user who has been connected to the internet through our SBS server.  All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet.  The network and sharing shows that it is connected to a public network not by the domain server.

  I hooked another computer for network wiring and it worked fine.  I changed the wiring, and it still doesn't work.

  Any ideas?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.

  I get this error DNS tries to connect to facebook, but no other site I noticed my internet is very slow right now too.   Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the address of the DNS server

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\mark>ipconfig/all

  Windows IP configuration

  Name of the host...: cookiemonster

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: ccrtc.com

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-22-8B-C3

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : ccrtc.com

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : 64-31-50-43-AE-8F

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::3458:a8df:c03c:d596% 12 (Preferred)

  IPv4 address...: 75.103.136.150 (Preferred)

  ... Subnet mask: 255.255.252.0.

  Lease obtained...: Wednesday 10 October 2012 21:16:34

  End of the lease...: Thursday, October 11, 2012 21:16:34

  ... Default gateway. : 75.103.136.1.

  DHCP server...: 209.132.160.25

  DHCPv6 IOOKING...: 207892816

  DHCPv6 DUID customer...: 00-01-00-01-14-FF-6D-A2-64-31-50-2E-2F-F5

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: enabled

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-22-8B-C2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : ccrtc.com

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2002:4 67 b: 8896:4 b 67:8896 (Preferred)

  ... Default gateway. : 2002:c058:6301:c058:6301

  DNS servers...: 209.132.160.4.

  209.132.160.5

  NetBIOS over TCP/IP...: disabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  Active DHCP...
  . . . . . . . . : No.
  Autoconfiguration enabled...: Yes
  IPv6 address...: d 2001:0:9 38: 6ab8:3482:e41:b498:7769 (preferred
  EXEs)
  Address IPv6 local link...: fe80::3482:e41:b498:7769% 16 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled
  Tunnel adapter ISATAP.ccrtc.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : ccrtc.com
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\mark >

  Hello

  Thanks for asking! If I understand correctly, you cannot connect to Facebook and get error, Internet is also slow. Try the question of fixing.

  Before I continue, I would like to collect some personal information.

  1. have there been recent changes to the system before the show?

  2. what web browser do you use?

  Method 1:

  Follow this link can not connect to some Web sites to perform the troubleshooting steps. Check if it helps.

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 2:

  Follow this link Internet connection is slow , and perform the operations. Check if it helps.

  Method 3:

  Follow this link, Update driver and update the network map. Check if it helps.

  For more information, see: link

  Answer us with the results. I'd be happy to help you further.