No sound from Midi to all

Similar Questions

• No sound from my Mac, all THE

  Hello

  Earlier today, I connect my Mac to listen to the music and the sound no longer works. I checked the system preferences and went to the sound option. I looked out, and the only thing available was my apple tv.

  As you can see, the mute box he checked and gray. I been to countless forums telling me that the red light in the headphone needs to be reset for the internal to appear again speaker. Well... There is no red light at first. I tried to reset the thing of LANDAU and he just a gray screen as a thing that is like the terminal because you can do almost anything on the mac from there. I didn't know where to go from there, because the only thing that told the forum is to listen to the startup sound and a few buttons. I don't hear the startup sound at all.

  I don't want to go antics with all that because I don't want to mess up anything else.

  While writing that gave me access to reuse my Soundbar and the volume changer, but the internal speakers still do not appear, and the mute button is still gray and ticked off. No sound from the computer. No matter what. I'll try to reset once more.

  -Kay

  Hi Kay, try this:

  1. Plug your headphones.
  2. Play sounds through them, then stop the track.
  3. Go to System Preferences > Sound
  4. Set on headphones, then remove the headphones.5
  5. Who should provide "internal speakers".

• I don't get all the sounds from my speakers

  Original title: sound recording play

  I don't get all the sounds from my speakers... the icon has an x through it... said that they don't are not hooked... shouldn't have internal sound

  Hello

  1. what version of operating system you are using?

  2. What is the full error message that you receive?

  You can try the procedure in the below mentioned link and check if it helps.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   

  Hope this information is useful.

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• I'm not all the sounds from the speakers. The volume is up

  I'm not all the sounds from the speakers.  The volume is up

  The following links may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  (307918) how to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/en-GB

• I can not all the sounds from my computer

  I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

  The sndvol32.exe file is possibly corrupt.

  To replace, there are two methods:

  (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

  (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

  If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

  See you soon,.

  Jerry

• Sound from internal speakers past (iMac 21.5 mid-2011, Yosemite 10.10.5)

  Last week, exactly after I unplugged my headphones, the sound from the internal speakers went and I don't understand how to solve this problem, please help.

  Sound still works when I connect my headset (or other device) to the audio output.

  Sound still works when I connect to my USB external sound card.

  Internal speakers still work (I can hear the start-up tone when I turn on the machine).

  In preferences / system I see "Digital output" instead of "internal speaker".

  Volume buttons do not work,

  Audio output leddoes not light.

  I tried:

  -Reset the PRAM,

  -SMC reset,

  -' sudo killall coreaudiod ".

  -repair disk permission

  screenshot:

  Plug and remove the headphones.

  If you see the red light in the headphone port, plug the headphones

  in and o ut of time port 5 or 6 to swing the microphone inside.

  Audio output can be blocked using digital technology.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• make a clicking sound from inside my Mac

  Just started today. Every few minutes I get a clicking sound from inside my iMac. It seems to work ok, however. Thought, it may be overheating and cleaned by vacuuming all the vents, but it did not help.

  Perhaps an early indication of a hard drive failing. Support everything up immediately (if you have not already) and get it checked with a free diagnosis in an Apple Center.

• Laptop: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  The first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Try to connect headphones or a pair of external speakers
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager
  • Reset your laptop

  These solutions and much more are explained in detail in this document: laptops HP - no noise or distortion of the sound from the speakers.

• Desktop PC: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  Have you tried a few different devices (headphones/speakers)? There could be a problem with the hardware with one of these devices. Also, keep in mind that most of the computers do not have built-in speakers, you don't need to have a connected device to hear anything.

  If you have already tried a few different pairs of headphones and speakers, the first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Make sure that your device is connected to the appropriate port on the computer, and if you use powered make speakers you they are plugged into a working outlet
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager

  These solutions and much more are explained in detail in this document: HP-no sound from the computer desktop.

• Qosmio PX30T - no sound from speakers

  I just replaced a failing on my PX30T HARD drive and now I get no sound from the internal speakers. I used the media restore and also put all the patches and windows 8.1. Still no sound from the speakers, but the headphones work well.

  As a last resort, I started with an image of Ubuntu USB and also no sound. I think I might have loosened a wire when replacing the HARD drive, but I don't see how because there are no other wires in the region. Ideas?

  If the headset work correctly, the audio driver must be already installed and I don't think that a parameter must be checked and changed.

  Reach:
  Control Panel? sound? Recovery tab
  Here, you should see the speakers and speakers must be marked as default device.

  Make and check if the sound seems once again

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite L650 no sound from speakers or phones

  I.ve just had my first problem with my Toshiba Satellite L650 - particularly serious, because I rely on it for all my music playback!

  Normally I can plug and on the headphone jack on my stereo, speakers cut out and I get HiFi glorious while it is inserted, and the speakers onboard bounce when I delete.
  Today, I have plugged as ususal and listened to a few songs.

  I unplugged (to move the laptop) and the internal speakers not to bounce.
  I reconnected the headphone jack and there was no sound from my stereo (finger test confirms the work of jack stereo).

  I checked all the app and the main volume - level in good health indicators were present.
  In the Device Manager, all reported correctly and counter activity took place during the test routines of the audio device for both speakers and headphones, but no real signal to the phone jack, or speakers.
  "Update drivers" who fired the message I; m to date.

  I uninstalled the drivers of "High definition Audio Device", and scanned for hardware changes after - drivers were automatically found and installed successfully, but still no sound.
  In desperation I dug an old USB-audio gadget, plugged and his fate that perfectly well by the USB port.

  Can anyone suggest what I can try to force an internal connection between Microsoft Sound Mapper (i.e. the string digital things that seems to work very well) and outputs real material?
  This machine is not an old duffer and this should not be the case!

  Thanks in advance!

  Hello

  Hmm, I doubt that the headphone is faulty because in this case, the internal speakers of the laptop computer s should work properly.

  Please go to Panel of-> sound-> the Read tab.
  The speakers as default device?

  In addition, please see the Audio Manager HD Realtek located on the control panel.
  On the right, you should see a few options (in my case, that they are marked with a folder icon). Check it!

• Satellite L650 - no sound from the left speaker

  Hi, I just bought a Toshiba Satellite L650.

  For some reason, the sound is only coming out of the left speaker and no sound comes out at all of the right speaker. Also even if I increase the volume of the sound still seems very low. I have reviewed and played around with the settings and same speaker balances without success.

  Help, please.

  Hi Rick1968,

  Theoretically, the left speaker could be faulty and needs replacement.
  What you can do is to check the sound settings where you can test different balances. Also make sure that its latest driver of Toshiba official Web site is installed.

  By the way: are you running pre-installed version Windows from Toshiba?