No sound, HP 2009 m Monitor

Similar Questions

• Dynadock U3: 2 monitors external installed but sound on only 1 monitor

  Hello

  I just installed T24D391 2 monitors to my laptop to A.s.u.s using the Dynadock U3.0. 1 monitor is connected using HDMI (main monitor), the other is connected with VGA (extended scrreen).

  Audio output however comes only through monitor 1 (main, connected monitor via HDMI). The second monitor has no sound output whatsoever.

  Even when I change the screen 1 to extended and 2 on the screen, only audio screen 1 (now the extended) of the screen.

  -> How is it possible to have the sound on both screens at the same time?

  Thank you!

  HDMI interface provides video and audio signals.
  VGA interface provides a video signal only.

  I guess that's the reason for the lack of sound

• Apple Mac Mini Sound issues 2009

  Audio greyed out icon was used, until I tried hanging speakers to it and it does not detect it as an output device. I tried 2 different speakers and nothing, I tried to use headphones and nothing, he said: "no output device available." I deleted the BezelServices.plist and rebooted, I started in SafeMode... nothing doesn't work. I have it hooked up too a gateway FPD1560 TFT LCD monitor. There is no USB ports or sound jack on the screen itself that I'm missing. If someone else has had this problem and how they did solve it?

  disconnect whatever it is connected to the headphones Jack

  go to: Menu Apple > System Preferences > Sound > output tab

  Select the internal speaker:

  

  If a headset that works, an amplifier connected to speakers or a speaker powered (built-in to a speaker amplifier)

• (Redirected) Alienware Aurora (end of 2009) and monitor Dell 3715

  Hello

  I have a late 2009 Alienware Aurora and want to add a Dell P2715Q monitor. I don't seem to have the good ports to connect the two. Can someone suggest a solution (short of buying a new computer). I want the solution to allow me to get the HD display on the screen if possible.

  Thank you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• HP 2009 m Monitor - screen scratches

  It is difficult to put into words what it does exactly, so I took a video of it:

  http://www.YouTube.com/watch?v=66UiA9h950M

  I've only had the monitor about 4 months, and I woke up this morning for this.

  I got this monitor as a complete package, and the PC itself works very well. I don't know what to do next.

  Your advice is appreciated.

  ~ Avidan

  Avidan, you can update the driver day before contacting HP.  This is not like a driver problem, but who knows what can happen.

  Here is the page How to contact HP .  You can use the method that makes you more comfortable.

• Upgraded to Windows 7 and no sound from monitor speakers integrated

  I upgraded my desktop HP Pavilion Media Center a1450n PC to Windows 7 successfully except for sound. My speakers are integrated into my screen LCD 17-inch HP vs17e and Windows 7 can not detect my built in speakers, I downloaded most every sound driver out there currently is there something escapes me? Can anyone help to draw sound from my speakers monitor integrated in the Windows 7 operating system?

  Thank you.

  You have Realtek Audio, which is usually installed with 7 drivers builtin. That means your device errors, yellow have_any Manager! s?

  Choose High Definition Audio Codecs, contract, then download the "Exe" file:

• No sound from my stereo speakers to monitor. I checked the settings and volume?

  Checked audio devices in my dashboard as well as volume.  Can not get sound

  If your monitor driver CD is included with your monitor, then use the CD and install the drivers for the monitor speaker. If you have already done this than trying to update the driver and make sure that you use correct driver for your monitor as well as the President. Or check your sound card driver.

• Varying sound levels of my S2415H monitor

  The volume of the sound of my S2415H monitor is variable. It is connected to a laptop Dell Inspiron L502X that produces consistent, high enough volume that I need to reduce.  After a restart, the screen produces reasonable, but not high enough volumes I read to reduce.  However, after some time, the volume of the monitor becomes so weak that I can't hear it.  Restarting my computer restores the volume for a while.

  This has happened for a few months and becomes tedious.  Any suggestions would be most warmly welcome.

  Patrick

  Get it exchanged.

• Default sound will remain unresolved. Keeps swinging back on my monitor.

  When you try to listen to something, there is no sound through my speakers or headphones. When I go into Control Panel, the default sound is on my monitor. I go to my speakers but the button set as default value is grayed out.

  I stay together and keep coming back to the screen.

  I got this laptop late October and just point out that I don't want to continue to have to keep resetting it every day.

  HP Pavilion dv7 notebook

  Series # 2ce2401z09

  Product # a5f92av

  Windows 7

  Version 6.1.7601 Service Pack 1 Build 7601

  System Type x 64-based PC

  I did not make any changes. It has been thus since I have the laptop.

  I don't know why the link doesn't work anymore.

  Try this one

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• my monitor is in "sleep" and he can't get out

  I have a HP 2009 m monitor is stuck in mode 'sleep' and he won't come out of him. I tried all cables cords, turn on and off the computer since I can only turn off by forcing it to restart I hit all the functions on the screen and he wakes not it I cannot enter in the computer to see whatever it is just a black screen.just lately I have made a download and it works after download , but I noticed that the monitor was Granie. Help, please!

  Hello! You could try a reset of the power. It helped me a few times on older computers in my village.

  Shut down your computer. Unplug your Tower from the socket. Hold the power button for 30 seconds with the Tower disconnected from the mains. Plug the power cord back into the tower. Hold the power button until the lights are we (5seconds)

  This clears the memory and discharge capacitors. It works for me. If your monitor has gone bad, it's another story. You will need the excess to another monitor.

  Dokie!

• HP PAVILION 550-126: start PC Desktop Monitor question

  Installed a HP Pavillion PC with Windows 10 550-126.  I plugged my old model monitor (2009) PC Pavillion, which is a HP 2009 m.  HP 2009 m monitor had a DVI connection, so I bought a DVI adapter to HDMI to connect the new 550-126 Pavilion.  At the start of the monitor shows nothing.  It takes a long time (5-10 minutes) before the login page appears.  When starting I have pressed the "Source" button on the HP 2009 m monitor and it comes up with a block that says "Check Vidoe cable", the block is delivered on one that says DVI is scanning, then digital asset.  I'm trying to understand if the problem is I use an adapter DVI to HDMI or if there is something else that happens - or I need to get a screen that has a direct HDMI to HDMI connection.

  Thanks for the help.

  It's the adapter.

  If you want the video to appear quickly, you'll need a display more modern.

  Yours is a type of old-school LCD vice a LED modern type.

  Fortunately, most modern screens usually have a HDMI input.

• HP G62-b24eo: can not get hdmi sound HP G62-b24eo

  Hello

  I can't sound to work on my laptop to my lg 32 tv(32LC51-ZA). (Video works)

  When I go into audio setting is no hdmi in option. (it is not regonize my tv and I clicked on see the disabled devices)

  but when I connect the laptop to my new sound, the led fujitsu monitor works.

  Device Manager show lg as pnp monitor.

  same raspberry pi did not work until I'm forced to use hdmi. (video worked but no sound)

  is there a way to force sound gap even when it is not regonize my tv hdmi.

  Thank you.

  very strange, but I managed to do that work by changing the port hdmi on my TV and now I can see my TV on playback devices.

• HP 2009 m: HP 2009 m screen brightness keeps going back to zero.

  HP 2009 m monitor brightness can be set in the menu and saved. He will stay at the setting you him adjusted for this session. The computer (Center think Lenovo M73) past in mode standby mode when it is not in use. Then when he wakes up, the monitor is usually resetting the brightness.

  Hi there @billc1257,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the brightness of the screen. I'll be happy to help you.

  Here is a document use and setting of your monitor.  I follow the step of adjustment automatic and locking the OSD settings.

  If you still have a question after that, I would contact the software company.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• 251 - a123wb Office with22uh MB: sound issues

  Just got this system 2 days ago. Apparently there is no sound associated with this monitor.  I'll have to buy speakers? I did have a system of office for many years. Where would I plug in speakers? I looked at the back of the monitor. Don't see any type of connection. Please help me!

  Hello:

  Yes, you need to buy a set of speakers for computers and they plug into the back of PC Tower, not the monitor.

  Here is the link to the section of the motherboard of your PC and the ports are marked as to where things hook up to.

  You would connect the speaker plug in port number # 8.

  http://support.HP.com/us-en/product/HP-251-A100-desktop-PC-series/8499652/model/8888621/document/c04383000/

  Figure: Nuts of nutmeg-P rear i/o ports

  1. DC power input