Upgraded to Windows 7 and no sound from monitor speakers integrated

Similar Questions

• How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  How to import emails from Windows mail to Outlook.  I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.

  The following versions of Microsoft Outlook are fully supported on Windows 7;

  • Outlook 2003
  • Outlook 2007
  • Outlook 2010 (when it came out)

  It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.

  Previous versions
  Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;

  • Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
  • Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.

  The info source:
  http://www.MSOutlook.info/question/303

  t-4-2

• Upgraded to windows 7 and also a new hard drive

  I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
  I was looking to upgrade to Windows 7 and also install a new drive.  New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
  How could I then exchange the old files to the new drive?
  What is your solution the best and less expensive?  How do you do this?  Help, please.
  Thank you
  Marco

  I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

  Clone the original 200 GB drive to the new drive.  To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

  PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

• I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose the music library?

  I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose any music library?  I'll be able to download I Tunes and recover my music library >?
  original title: Windows 7 upgrade from VISTA?

  Hi Jrawie,

  If you want to upgrade Windows Vista to Windows 7, you won't lose iTunes music library. However, there is a chance of losing the music of iTunes library if you choose custom installation.

  You can see the Microsoft article for more information on the upgrade:

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  You can also view the article mentioned for more information:

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/UpgradeAdvisor

  Let us know the results.

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

  Original title: Windows7 and Tablet PC

  I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition 2005 Version 2002 Service Pack 3 on it.  It has a processor Intel Pentium M 1.73GHz, 1,999 GB of RAM or processor if you look in the BIOS, 2048 MB of RAM.  I think it's the RAM Max will take this particular PC.  The processor is scalable?  I know that I have contributed to a maximum of one of my doors from the other monitor has collapsed on me one day and is unusable, so I think this is one.  The ugly manual, I downloaded did not about the Max RAM, a Fujitsu 37.2 GB HD and a CD - RW Optiarc.

  Because Windows XP is longer supported, no. updates (although I find it odd that a pop-up saying updates are ready for your computer is fun) and for some reason it will run is more than some previous programs I ran over it, such as MSE and Windows Media Player 11, and I don't know I'll find others.

  The important question is: I want to upgrade to Windows 7 and would like to know if all my tablet/pen functions still work, since it's the main reason I want to use?  And of course running WinXP is a safety hazard as well.

  I use my ASUS X54C now and you want to reset to factory settings and reformat the HD, so I want a computer to use while I'm this, as well as using his pen to create a clip art image and also many other things.  Is there anything else I should know?

  The first thing to do is to check the support web site of the gateway to see if there are drivers for devices on Windows 7 for your model. If there is no record of specific device in Windows 7 listed then you will not be able to run Windows 7 correctly, or it may not work at all.

  Gateway driver support web site: http://us.gateway.com/gw/en/US/content/drivers-downloads

  Note: There is an "Auto Detect" option that can help you determine the right model you have.

  M280 using as a guide I tried to see what is available and found only XP / Vista and Windows 2000 drivers, so you may be out of luck, but try to auto detect and see if you have Windows 7 drivers listed.

  J W Stuart: http://www.pagestart.com

• I want to uninstall the upgrade of windows 7 and go back to Vista.

  This device comes preinstalled with Vista so that I only have the recovery disks that I made when I first set up the computer.  How can I uninstall the upgrade of windows 7 and reinstall Vista?

  BogeyB,

  If you have made a real upgrade (overlay on Vista), you might be surprised.  Click on the computer and open the D Recovery drive.  Open the folder named Recovery. Look at the bottom left corner.

  What is the date of creation?  Mine is from 2007.  I do not superimpose WIN 7 until 2011, but the recovery is still 2007.

  It's actually your full version of Vista recovery... it didn't get deleted or altered, except if you did.

• HP Pavilion entertainment laptop upgraded to windows 7 and webcam is longer.

  Laptop computer HP9925nr has been upgraded to Windows 7 and the Webcam is no longer find. Is disabled over Webcam because it is not compatiable with Windows 7? I updated the driver from the website, but says that the Webcam is not found.

  Try to install the driver from the following link:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45825.exe

  If the problem persists, consult the document below for more troubleshooting:

  http://support.HP.com/us-en/document/c02452221

• I have upgraded to Windows 10 and all my creative apps cloud disappeared. How can I recover/reinstall?

  I have upgraded to Windows 10 and all my creative cloud applications have gone... How can I recover / reinstall?

  Please install the latest version of the Adobe Creative Cloud Desktop from here: creative cloud desktop application

  Then, you can use the desktop creative cloud app to install applications. Creative cloud help | Download, install, update or uninstall applications

• Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

  I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

  OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

• Folio 13-2000: Folio 13 - upgrading to Windows 10 and USB Hub 3 driver error

  I just upgraded to Windows 10 and found a USB port (left side) does not not and verify that there is a driver for Fresco Logic USB 3.0 error root hub error friv. Previously the USB port works well when he was Win7. Updates driver or the driver who needs to re - install?

  Broadcast

  Please first install the Intel® Chipset Device Software setupchipset.exe

  Reset

  Read the page

• IM using Windows XP Profesional, can I upgrade to Windows 7 and what would be the cost?

  upgrade windows xp to windows 7

  IM using windows xp profesional can I upgrade to windows 7 and what would be the cost? what I have to put all my files on an external drive then uninstall windows xp then put in windows 7 then put back my files? is that how its done? Thank you.

  First the cost, you must know if your hardware can support Windows 7

  In General win 7 should a minimum og 1 gig of ram (for 32 bit) or 2 for 64-bit, and it needs a video card 256 MB or greater.

  If your less and can not be updated it may be best to start thinking about a new computer.

  If the above is ok there are various offers for win 8, but make sure you buy form a reliable site of Ms.  There are a lot of current scams.

  Good luck

• Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10?

  Original title: Dee

  I have an old Dell Inspiron 15 with Vista Home Premium and want to switch to the window of 10. Y at - it a link to the free update or I must first upgrade to Windows 7 and upgrade them to Windows 10? Or could it be the Windows 10 Pro?

  The free offer of Windows 10 is not available for Vista.  You need to upgrade to Windows 7 SP1 or Windows 8.1.

• I have Windows Vista installed on a Dell Inspiron 530 s. Vista can be upgraded to windows 10 and, if so, how?

  I have Windows Vista installed on a Dell Inspiron 530 s.  Vista can be upgraded to windows 10 and, if so, how?

  Vista is not included in the free update.  If your hardware is compatible wins 10 you can buy a key for windows 10

  1 GHz processor or faster 1 GB of RAM (32-bit) or 2 GB RAM (64-bit) 16 GB of disk space available (32-bit) or 20 GB (64-bit) Graphical device DirectX 9 with WDDM 1.0 or higher driver Your processor (CPU) must support the following extensions: SSE2, NX, EAP

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.