HELP: chkdsk.exe file corrupted

Similar Questions

• WinRelauncher.exe - file corrupted

  The file or directory X:\Windows\System32 is damaged and unreadable. Please run the Chkdsk utility. I get the above message on my laptop when it boots, I have windows vista

  Hi DenisJames,

  1. you remember to make changes to the computer before this problem?

  2. are you able to boot into Normal mode?

  WinReLauncher.exe error always occurs when the corresponding WinReLauncher.exe file of the operating system is deleted, corrupted or infected with the virus.

  You can try an advanced boot options startup repair and check if it helps.

  a. restart your computer and keep pressing the F8 key. This will open the screen that says "Advanced Boot Options".

  b. click on 'Repair your computer' and press 'Enter '. Select the keyboard layout and click "next".

  c. type the user name and password and press the OK"" button. This takes you to the menu"System Recovery Options".»

  d. click on "Startup Repair". You need a few options that the system will suggest. During the boot process, your system may need to restart to make the necessary repairs.

  If you are unable to do the repair to start the advanced startup options, and then try to start from the full version of Windows Vista installation disc.

  Check the link for more information:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help with exe files.

  I am looking for an exe file to play on the laundry. How to insert the exe file in dreamweaver 8 to play when the page is loaded. Very similar to a flash movie is loading. The file is created with the extension exe and I can't change it or recreate. any help is appreciated. Thank you

  In general you can not do this on anything other than an intranet. Is it
  where you work? If so, then you should investigate using
  ActiveX to run this exe file - check the Microsoft site...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "brananc1" wrote in message
  News:ee265m$LCT$1@forums. Macromedia.com...
  > I'm trying to get an exe file to play on the laundry. How do I insert the
  > exe
  > file in dreamweaver 8 to play when the page is loaded. Very similar to the loading
  > a
  > flash animation. The file is created with the extension exe and I can't
  > change
  > who or recreate. any help is appreciated. Thank you
  >

• Several registry / other errors, was working fine yesterday. "setup.exe file corrupted.

  each registry you can think no error.  I can connect to the internet, but not to download anything.  It seems to be linked to a "installation of Microsoft office 2007" as the registry main/first error was a mistake 'groove '.  At the start, it gives a message of a generic profile will be used... no programs or the desktop icons showing... great disorder.  Would appreciate any help.

  Thank you.

  Chris.

  Hi chrisgregorio,

  1. Did you the latest changes on the computer?
  2. You have a security software on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If you don't receive a similar error message that is mentioned in the Microsoft article then try the steps mentioned below.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

• Help, please! File corrupted on USB!

  Dear ladies and gentlemen,

  I am the a professional graphic designer currently used by the MLSIQ Solutions. I was working on a very important project and have done a little. I saved and saved, etc. But a participation rate very unhappy of events that happened.

  The project was saved on a USB key. He pulled the computer that I was SAVING the document to my office, and because of this event suddenly I ACCIDENTALY saves the file in photoshop as a .com extension!

  Now when I try to open it, it opens in the command promp and does nothing!

  Can someone tell me please how to bring in .psd format?

  
  NOTE:

  The USB has failed because it was torn, and all the data disappeared.
  Rename the .psd file create a photoshop file, but that does not open.

  Help, please

  No worries, and you're welcome.  I'm just happy to have been able to help you recover your file.

  -Christmas

• Each exe file I open me gives a "corrupted file... run chkdsk', but the analysis of virus and malware are clean?

  Hello

  I'm completely puzzled here. When I started my computer today I got a notification saying one of the start-up programs exe file has been corrupted. I think that "uhoh". Then my antvirus software is dΘmarre with the same and I get the notification that I'm not running and antivirus. Then I realize counts all exe files I click gives me the error "file is corrupted... Please run chkdsk" appear in the taskbar. At this point, I am thinking virus or malware.

  Some programs still work even with the corrupted message, but every exe, whether old or newly downloaded, will give me this corrupt message. Also, when I tried to reinstall my anti-virus, he wouldn't. (I'm under Avast Internet Security Pro).

  I found myself downloading AVG free and for some reason any that exe is not being corrupt. So I at least have a running antivirus software now.

  I scanned my whole system with AVG with the latest virus definitions, and it sees no virus. I run only Malwarebytes with the latest updates... nothing there either.

  Is my computer clean? For me this seems unlikely, but there is something that is not a virus or malicious software that could cause this?

  Also, I started in safe mode, and it makes exactly the same thing. Each exe is corrupt when I open it.

  I am all of these ideas, except to the reformat.

  Thank you

  Mike

  I don't see you mention on running "chkdsk".
  So, do you?

  How to run the check disk (chkdsk)... assuming you are using Vista

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator >

  in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.
  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
   
  Restart your computer. It will take a while. DO NOT stop the machine. Just wait.
   

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• App data folder corrupted when you attempt to install the .exe file

  Hello

  I'm using Vista OS, I get an error message like App data is unreadable, when I try to install any .exe file and ask me to run chkdsk.exe. I run, I don't enter comments screen black (I'm not aware of any comment). But no use, I still face the same question. while trying to install any .exe file. Please help me out of it.

  Thank you for your support in advance.

  Kind regards

  Manosarath

  Hello

  1 did you change on your computer?

  2. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  WARNING: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

• I have a file corrupt Microsoft. He told me to run the chkdsk utility, but it won't work. I can't defrag my pc because of this

  I have a file corrupt Microsoft on my computer. I have no idea what this file. When the warning it tells me to run my chkdsk utility. I tried to do, but it won't work. I can't defrag my pc cause when I try it tells me scheduled for the chkdsk utility. It really seems to be spoil and slowing down my computer. I don't know much about computers so it becomes really frusrating. Any help would be really appreciated!

  Hi DonnaPeterson,

  Click Start-> run, type &-> chkdsk c: / f-> ok. You will be asked to schedule the scan of the disc, restart your pc.

  If above used to work, start your pc in safe mode and try.

  I hope this helps.

• boot critical file c:\ntoskrnl.exe is corrupt

  Every time I do windows update and then restart, when it configures updates that does not have the login screen, then on my laptop restarts and goes to startup repair. She does every time after that the update and I think it restore my laptop to a working state, because sometimes my files are missing, although she said that no change will be to your files. I used registry booster and there was problems 226 rate was high. When I had repaired problems I installed service pack 1 manually since it wouldn't do it through windows update. When he was made to install the same thing happens again. The problem was boot critical file c:\ntoskrnl.exe is corrupt. From start of the repair, I looked for booster registry to see if he can repair the file, but for some reason it was not on my laptop.

  "Windows NT did not start... Ntoskrnl.exe error message.
  http://support.Microsoft.com/kb/124550

  http://search.Yahoo.com/search?p=Ntoskrnl.exe+is+corrupt&EI=UTF-8&FR=HP-PVDT

• How can I get my help and support in my menu start to start so I can use it? one of the tech told me that I had to reinstall the exe file, but it didn't help me find to reinstall the file.

  My help and support does not come to the top in my xp home computer. If I need to reinstall the program exe file, I can find to operate here? It is not on my computer.

  Hi Rex-36

  You can consult the services to see if the service is running. Click 'Start', click 'run' and in the Run dialog box, type "services.msc". On the page that has ensued, scroll down to "Help and support" and right click. Select 'Properties'. .  Look to see if the service is running and if this is not the case, click on the button to start the service. In the box "Startup type", make sure that it is in the type of start "Manual" or "automatic" . Click 'OK' and exit.

  I hope this helps.

• I have a file corrupted on my windows xp Hyperthreaded system. the file is c:\Windows\System32\svchost.exe. is there a way I can get this to work without a windows dump

  the title tells the whole story

  Hello

  1. how assume you that the files are corrupt?

  2 are you facing problems on your computer?

  I suggest you to try the steps below and check if it helps.

  SFC [SFC system] scanner on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.

• need help to program deleted / 32/rundll.exe file system

  need help with deteleted system32/rundll.exe.files

  Hello

  ·         What is the full error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps:

   

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Startand then click run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer.

  You can also try System File Checker analysis to repair missing files or damaged in Windows XP.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• Explorer says Windows can't open .exe file and all my files have .lnk now... someone help please...

  does not .exe

  Hello AYTEZ,

  You can try the following to see if it will fix the association for .exe files.

  Click on the below KB article number for help with the problem of setting file association.

  KB Article ID: 555067 -cannot open EXE files
  Please let us know if that helps.
  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HELP: .exe files will open in Windows Media Player

  Yesterday, I did something with my computer and now it opens all .exe files in Windows Media Player. This means well enough that I can do anything. When I click right a .exe program, it does not say "open with...". ». SystemRecovery does not work either. Please help me solve this problem

  Salvation of Daniel,

  Try the steps in this article

  Change the programs that Windows uses by default

  http://windowshelp.Microsoft.com/Windows/en-us/help/6ef5399f-a0b6-4133-AC76-41cda36b1ca21033.mspx

  Hope will fix your problem, please post back and let us know ok.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.