No sound on playback in Movie Maker

Similar Questions

• Sounds of Windows Live Movie Maker fine in project but no sound when recording video

  So, when I put the video set the sound worked fine, but after that I had edited and saved as a video rather than a project of wmm and then opened it in Windows Media Player, there is no sound.

  I would appreciate any advice.
  Thank you!

  So, when I put the video set the sound worked fine, but after that I had edited and saved as a video rather than a project of wmm and then opened it in Windows Media Player, there is no sound.

  I would appreciate any advice.

  Thank you!

  =============================================
  More that likely there is a problem of compatibility with one or more
  of your source files. Even if the project plays when
  under the direction... the problem occurs when it is coded as a video file.

  The only solution I know is to convert your source files
  the formats that are no longer compatible with Movie Maker.

  Several formats are apparently compatible
  with different versions of Movie Maker
  but the most reliable choices are:

  Photos - bmp, jpg
  Video - wmv
  Audio - wav, wma, wmv

• problem with photo to movie maker

  I get no picture and sound to playback of movie maker. I can see the files when I play in the media player and photo gallery, but not in the movie maker. How can this be repaired?

  It is possible that the file is not compatible with movie maker.

  Convert a wmv file using one of the many good free apps, some are listed here and everything works fine.

  http://myvideoproblems.com/webpages/UsefulProgrammes.htm

• Windows Live Movie Maker-no sound from imported video

  No sound on Windows Live Movie Maker!

  I use a Windows 7, and I have a camera "Canon PowerShot SX210 IS." I want to make a simple movie in Windows Live Movie Maker, and after that I imported the video from the camera to Movie Maker, there is no sound at all.

  There are other issues similar to this, but it describes go to 'Tools' and I can't seem to find the regular tabs like that.

  Please answer with anything!

  I use Super to convert it to a .wmv and see if it works.

• Windows Movie Maker 2.6 plays no sound on some videos

  I converted the videos of. MOV to. MPG and so they could be added in movie maker, the video works fine but the sound does not work. I already tried to play videos on windows media player and the sound works fine. I also tried to add another video from a different digital camera (it is also. MI/GAL) and the video worked very well... they are both. MPG, but only the sound files works in Movie Maker.

  just forget about it. for ANYONE having a problem with Windows Movie Maker, just go and download Video Editor Pad. its free and 10 times easier to use.

  Here is the link http://www.nchsoftware.com/videopad/index.html

• No audio in Movie Maker on Windows 8

  I have Movie Maker installed with all Windows Essentials which are pre-installed on my laptop Windows 8. I started using Movie Maker and I imported a video of music in there. When he finished preparing, there was a great video, but no audio signal appeared. Also, when I add music manually in the home menu, the music is always silent. The video is fine when I open it upwards on Xbox video or Windows Media Player, just not movie maker. And if I can't find the right sound to cut, then Movie Maker would be useless for me. Help, please! AS SOON AS POSSIBLE

  Hi Kyle,.

  Are you referring to Windows Live Essentials?

  If so, then validate the application in the Windows Live Essentials forum for better support.

  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV?sort=lastreplydate&dir=desc&tab=threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=all&TM=1387036233827

  Answer please if you have any questions.

• Windows Movie Maker, create empty audio files from Audio CD through Media Player playback.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  =================================
  As the Audio Input Source, try the stereo mix.

  Or... it may be worth trying to RIP the CD with .wma as the
  target format, then import the .wma file into Movie Maker.

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx

  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx

  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm John Inzer - MS - MVP - digital media experience

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• Windows Movie Maker, a problem of sound with the "Split"?

  Well, that makes me extremely crazy because I'm unable to download videos on youtube. So I have this video which lasts 7 minutes. I decided to split the video into two (at halfway accurate). Then I inserted a photo in the middle of the video. The problem here is that after the image in the Middle, the second part of my video plays fine except for the sound (my voice). He decided to play my voice from the first part of the video response and bacsically everything for the second clip! I tried everything in my power to make it work. I even tried to cut the second part, while he was alone and recording, but guess what? He still played my voice of the first part of the video! It is making me upset moajorly. I also have the updated version if you were wondering. It is much too difficult to work with, especially since I'm used to the other older, so I think I'm missing a certain button or article or something. I don't even know. So my question is, how to split a video by half, add a picture and make sure that my voice is match with my mouth & video. Moreover, I do not have voice on it or add audio. Quite simply, I filmed a video of me talking.

  Since you use Movie Maker 6 and not Live Movie Maker, what follows
  tutorial composed originally for XP, Movie Maker, you should get started

  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

• How is it that windows movie maker has prepared a video for playback quality

  It was not used to do but now she prepares to video for playback quality, I don't want to I know that sounds strange, but it takes forever to do if there is a lot of videos or if the video is long so how can I disable this function I updated and since then there this preparation video message and I want to know how to turn it off and I tried to uninstall it and reinstall it but when I get it installed, once it has always the same thing, I don't know how to get out of there so I don't have to wait if a long time when I have a movie to do and my computer is fast, but it's just that it takes ages to prepare the video if I have a long movie , so if someone could help me I would really appreciate it

  Just a guess...

  Have you ever used Windows Vista Movie Maker 6
  and are now using Windows Live Movie Maker?

  Try to return to Vista Movie Maker 6... It should always
  be available in your Start Menu.

• Pavilion dv3500: STATIC SOUND during the OPENING of MOVIE MAKER

  Hi good day!

  When I opened my Windows Movie maker, all that audio recordings of my laptop becomes static, I can't even find a better way to solve this problem, I think I need an Audio encoder. Kindly help me with my problem. Hoping faster responses. Thank you.

  Hello @Trafalgar_Law,

  Welcome to the Forums of HP Support!

  I read your post on the sound and wanted to help!

  Are you just having this noise problem when using Windows Movie Maker?  If so, try to uninstall and reinstall the program.  Alternatively, you can try to use Windows Update, to search for the drivers that are compatible with Windows 10.  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• Live Movie Maker: why the sound does a video when the video is on an effect of speed? If someone can solve it?

  When I set the speed of the effect on my film I can't hear the sound of the film. Someone help me please to solve it im trying to get a voice Chipmunk or fred, thank you

  Hi CaraPeters,

  If the problem occurs only in Windows Live Movie Maker, and then you can see the following link for Windows Live contact for further assistance:

  http://www.windowslivehelp.com/searchresults.aspx?query=no%20sound%20when%20The%20video%20is%20on%20A%20speed%20effect&ProductID=5

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Hope this information is useful.

• Windows Movie Maker - sound only, no video is displayed

  Using the Director to download my video noise is get recorded. Black screen is displayed on the video section. Any ideas on what I am doing wrong? I checked the help on the program and measures diplay window all correctly until I try to capture the segment, then no video.

  Whenever you get a black screen for video and audio played correctly, this means that you do not have the right video codec installed on your computer. To solve this problem, the simplest method is to install an application called MediaInfo on your computer, so that you can analyze the video file and see which codec you need to install. This tutorial on sound with no picture in Windows Media Player mentions the problem, that is the question even if it occurs in Windows Movie Maker or Windows Media Player.

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• No sound in Windows movie maker

  I was doing the video it worked perfectly with the first then the sound just stopped working. When I click on it in the collection, but nothing when I try to play in the timeline, it will play the melody.

  I was doing the video it worked perfectly with the first then the sound just stopped working. When I click on it in the collection, but nothing when I try to play in the timeline, it will play the melody.

  =====================================
  There may be a compatibility problem with music
  Conversion of files to WMA before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...