No sound on the video file problem

Similar Questions

• Problems with codec... need help to open the video file...

  Hello
   
  I tried the previous suggestions and ran the reset... no change...

  · What happens when you try to play the video file? You get the error message? Yes, error msg - windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.
  · What is the file format? 3GPP
  · The question is limited to this video file? Yes, all the videos copied from my cell and downloaded on PC, the problem occurs. Note all the copied images have no problems.
  · Did you do changes on the computer before the show? None.

  Any further suggestions? I fear, if I should try a codec download from the internet and that you and the measures to be taken.

  Thank you

  Dan

  ... Any further suggestions? I fear, if I should try a codec download from the internet and that you and the measures to take...

  I would recommend that you download and install K-Lite Codec pack from here.

  
  Download K-Lite Codec Pack
  

  Get either the Standard or complete package to halfway to the bottom of the page. There is a package tailor-made for 64-bit if your Windows 7 is that the flavor. The 64-bit package is not always necessary, as most of the programs are still 32-bit.

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• No sound on the videos uploaded from a mobile phone to the computer

  I saved several short videos on my memory card on my mobile phone.  When I imported the files on my computer, the video is perfectly, but there is no sound.  I can't find a way to get the proper functioning.  Can anyone help?

  Thank you

  Ali.

  Hi Ali,
   
  The file you are trying to play may not be supported in Windows Media Player.
   
  You will have to perhaps download and install the codecs that support the file type for Windows Media Player.
   
  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
   
  To check the file type
   
  a. right click on the video file
  b. Select Properties.
  
  Reply back with your answers.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop

  I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.

  I could at some point... but now all I get is audio, no video.  The files open and work on

  my laptop that also uses Windows Media Player... but for some reason now... nadda.  Seemed

  This all started when I upgraded Windows more late service CAP and also installed Real Player.

  Help!

  Hello

  • What version of Windows are you using?

  1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.

  2. the link provided below lists supported by Windows Media Player file format.
  It does not list the AVCHD or. MTS files supported file format directly:
  http://support.Microsoft.com/kb/316992

  3. yet we cannot be sure at this point that the issue is due to interference with some files.

  Method 1:
  Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Method 2:
  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  
  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Receive the poor quality of the sound on the videos of YouTube on Google Chrome.

  Original title: sound quality

  I have distorted sound on You Tube videos i-e poor sound.the sound on I-Tunes is ok my operating system is windows XP

  my browser is google chrome

  Hi kenrushton,

  Thanks for posting in the Microsoft Community.  If I understand correctly that you receive poor quality of the sound on the videos of YouTube on Google Chrome.

  Try to play videos in Internet Explorer and check.

  You can follow this link & check if the problem persists:

  Games flash, video or audio player does not work. Windows

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope it will be useful. Incase if you have further queries please reply and we will be happy to help you.

• every time I lookon internet to images, texts and videos no sound on the videos and pictures freezes

  my computer crashes when I look at pictures of Web sites also no sound on the videos of you tube

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• Why can I get only audio when I play the video files?

  I only get the audio portions when I play video files.  The video is black and white.  What is happening with mi/gal., avchd and videos posted to Web sites. YouTube, Facebook, etc.  The video files only can I play are windows media files.  Media Windows PLAYER will not play any other video files?  I have the latest updates for my video card and the adobe flash player.  Thanks for any info!  Elwood, Windows 7 64 bit, i7 980 x @333 6 hearts, 12 GB of ram DDR 1600, Radeon 5850 GPU, OCZ Vertex 3 120 GB SSD

  It is likely that the various files contain the CODEC, that are either not installed on your computer, or PrE is not able to use them.

  You list several types of files, and I urge you to first see this FAQ entry, then get one of the utilities file info, related to it, G-Spot, MediaInfo, or MediaInspector, then view the details on the different CODECS: http://forums.adobe.com/thread/440037?tstart=0

  In addition, WMP cannot play the video shows the probability of a CODEC problem.

  Or another of the great, try free media players, VLC Player, or MediaPlayer Classic HC. Both contain many useful CODECS, but they do NOT install them in the operating system.

  Good luck, and with the CODEC info, can anyone give your recommendations.

  Hunt

• Re: How to save the video file to a DVD-R for Equium A200

  I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

  My cursor also has disappered in the suite of windows media, that makes life quite difficult.

  Any ideas?

  Thank you.

  You mean, you want to copy the original DVD movie to HARD drive?
  Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
  I would recommend shrinking the DVD movies using a tool called DVD shrink.
  It would decrease the data and would also copy the content to the HARD drive.

  But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
  Google a bit and you should find many free applications that would help you to do this work.

  Good bye

• How to play the video file from Gigashot A40FE?

  I have 40 GB A40FE cam gigashot.

  I can't able to play the video file from this cam. no support for the folder.

  Please give me answer.
  How to play that format or I want to convert or download any player for whom?

  Hello

  Have you tried to read this file using the VLC Player?

  It is a small player and the best is that it is just for free! :)
  He plays most file types, and I think that you should test.

  See you soon

• View thumbnail in the video files does not not in xp real player but working in windows media player files

  View thumbnail in the video files does not not in xp real player but working in windows media player HELP files!

  It might be worth a try to run the following command:

  Reach... Start button / run...

  In the box run... type or copy/paste...

  regsvr32 shmedia.dll

  (Yes, there is a space between 2 and s)
  Press on... Come in...

  You should see a dialog box stating:
  "DllRegisterServer in successful shmedia.dll".