No sound through the phonak icom

original title: device I have a phonak icom and can not get the sound to come thru, had run so I changed a parameter and cannot find my way back to cancel any suggestions

have a phonak icom that brings the sound of the computer in my hearing aids, works very well. I've tinkered with a frame, now I can't get the audio to work.

Does anyone know how can I fix that I don't know what I did to screw it up. Tinkered with something in the audio settings in the bluetooth settings. Please helpmy teens are away from home and they were my resolvers :)

Hello

I suggest you try these methods and check the status of the issue.

Method 1:

Open the hardware and devices troubleshooter.

http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

Method 2:

Restore the system to a system restore point, where the device has been communication with the computer properly and check the status of the issue.

What is system restore?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

You can also refer to:

Connect to Bluetooth and other wireless or network devices.

http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

Add a Bluetooth device or other wireless or network device: frequently asked question.

http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

Tags: Windows

Similar Questions

  • You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

    For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

    If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

    Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

  • Computer says his play a sound but no sound through the speakers

    Original title: my computer says his play a sound, but I can't hear anything and he's not really playing the sound through the speakers
    My computer is not playing any sound / sound, but the computer says it is but there is no sound coming through the speakers

    Hello

    1. don't you make changes on the computer before the show?
    2. are you able to hear the windows startup sound?
    3. What is the brand and model of the computer?

    Method 1:
    Make an audio store and check.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Method 2:
    You can perform the steps in the link and check if you can hear the sound.

    No sound in windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 3:
    If the steps above does not help then you can uninstall and reinstall the sound drivers and check.
    To uninstall the sound drivers from Device Manager, follow these steps:
    | a. Click Start, type Device Manager and press ENTER.

    (b) in the Device Manager, select sound, video and game controllers and the same.
    c. highlight the driver, right click and choose uninstall.
    d. restart the computer, if prompted.

    Check out the link:
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Reference link:

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  • I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers.

    I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!

    Hello

    Troubleshooting with the monitor speakers sound problems

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01289551&LC=en&cc=us&DLC=en&product=3770742

    Also try to update the drivers of his last.

    I hope this helps.

  • Re: Satellite C660: Sound through the speakers when the headset is connected.

    I have a brand new 258 C660, running on Windows 7.
    Playback device: Realtek High Definition Audio

    * Whenever I have headphones or external speakers connected via the 3.5 mm jack plug, sound still comes through the built-in distant.*

    Here's what's happened so far:

    When I plugged the external speakers were first, I was asked to choose if I had plugged a headphone or speakers. I selected "speakers" and then also, perhaps foolishly, choose "do not ask me again".
    Now, I can't to this selection again.

    Here's what I've tried so far:
    -Reboot
    -Try different headphones, try them on other devices
    -System Restore (not, for some reason any)
    -all settings via the sound control panel

    Basically, I think that I am looking for a way to disable the internal ATAPI Jack when the external Jack 3.5 mm is used.

    I am aware, there was a similar thread some time ago, but the problem may be slightly different and perhaps due to the fact that I chose "do not ask me again". At least, I hope this isn't a hardware problem...
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=241409𺼁

    Thanks in advance for any advice

    Don t think there s hardware issue.

    Try this:
    Connect the headphones.
    Go to the control panel-> Sound-> playback tab
    Here, you should see the speakers and headphones.
    Now choose the headphones and set this default value.

    This help you?

  • No sound through the speakers

    I have a HP Pavillion DV6 earlier and today a window Insyde Flash skipped upward, I didn't know what it was and did not trust in it so I closed it, seconds later a CMD window opened and closed then the sound on the video, I watched her leave stutering and stopped while I went on another video and it's the same thing and there was no sound on spotify so I rebooted. When I turned my laptop it was normal, I'm so back spotify and noticed a message at the top that says: 'there is a problem with your sound card. Spotify is unable to play music. "and still no other windows will produce sounds, I realized then that I can get sound on things like youtube or games through my headphones, except spotify plays no music and always produces the same message, I'm doing an analysis of the system and updated 11 things waiting for me , which none seems to have been of Insyde. I'm really stuck with it and hoping that someone here will help me.

    Hello:

    Please, try the following...

    First do a hard reset of the laptop and if the audio does not return thereafter, then try reinstalling the audio driver.

    Hard reset instructions on the link below.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=...

    If you are still without audio, go into the BIOS and set the defaults, save and exit.

    Paul

  • Windows 7 - sound through the internal speakers but not headphones...

    I've upgraded to Windows 7 and got the latest Realtek HD Audio driver, and the internal speakers work fine. Nothing is coming through the headphones well. In the Audio Device Manager, it lists the headphones as "Realtek Digital Output" and seems to work, but there is no sound. Before I could just plug my headphones and it would turn off the speakers and only use the headphones. Help! Any ideas?

    Hello jrh388,

    To better help, what is the brand and model of your PC?

    You can check if the headphones are activated as a playback device. To do this, see the following steps:

    ·  The Pearl-click Start and type Sound in the start search box.

    ·  Select card change settings in the Start Menu Options.

    ·  Then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

    · Select headset and select

    You can also view the following link for more information about advice for solving common audio problems:

    Solutions to solve common audio problems

    Please let us know if the steps to solve the problem for you or if you need assistance.

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • No sound through the TV speakers after connecting the dv7 - 1247 cl via hdmi

    I have connected my laptop to my harman kardon receiver via hdmi, which is connected to my HDTV.  The video shows big... looks great. But no sound is coming through the TV speakers.  I went to the audio options and an hdmi output chosen, but still no sound. Any ideas?

    Ty

    Hello

    Take the receiver the most out of the image and connect the laptop directly to the TV. Does your sound work now?  What SW you use for audio/video playback? MediaSmart? Try this also - disconnect the cable - release MediaSmart - plug the cable and then try again.

    Press Fn + F4 to switch to HDMI only. This action refreshes the screen, transfers to the screen from the laptop to the external display and audio now comes from the HDTV sound system.
  • Qosmio X 70-A-12 X - no sound through the HDMI connection

    Qosmio X 70-A-12 X - Windows 7

    I have tried everything regarding this issue, lost 12 hours of research and asking everyone... I hope that you will give me the answer. I tried to install the drivers for different processor, Intel based, each time nothing, I have a controller, video, audio and Conexant smartaudio HD game.

    I also tried letting windows install their own driver. Windows Media Monitor... I have this case HDMI is shown but gray color, as there is nothing plugged. When I click Properties it says that everything is ok and active... so thank you for reading this. If you know another way to activate the sound via HDMI, I would be very grateful.

    PS - I picture on HDMI, but no sound.

    Thank you!!! :)

    Hello

    I checked the Toshiba download page and I can see your Qosmio machine is supported for Win7 64 bit and I think that you are using this version.
    I see ago offered all the important factors like driver chipset driver driver sound or display, so I hope everything works out well and there is no reason for experiences drivers.

    I would like to know if there is a problem when you use your machine without connect anything to it? is everything is OK with the material? You hear the sound on the internal speakers or headphones?

    To your HDMI issue: can you please explain what you are trying to do exactly?
    Are you trying to use your Qosmio with TV or what? When you open the properties of the sound > playback devices have tried to activate the listed device output digital (HDMI) and set its default value?

    By the way:
    Click on the volume icon in the taskbar and click mixer.
    Digital output is listed here? Check it out in the operative part of the option. Make sure that is not set to mute.

    Play a little with all these settings to make sure that everything is OK.

  • Satellite P500 - cannot get sound through the HDMI to the TV

    Hello

    my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

    I can't get sound via the HDMI to the TV,
    I've updated all the drivers.

    There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

    See you soon.

    Hello

    SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

    If so, mark this device as * default * and test the sound of the TV again.

    Greetings

  • sounds through the speakers internal helmet

    I have sound coming through my internal speakers and my external speakers (those who connect in the back), but not through my headphones. I wish that the defect of being my intern that if my external or a headset isn't plugged. He used to work, but suddenly changed. It is a work computer, but I have some access to the settings etc. Help? I don't want to call it!

    UPDATE:
    Apparently, as soon as you ask for help things themselves figure out. Somehow, I got it to work. I opened "Realtek HD Audio Manager in the settings area and unplugged and replugged in everything." All of a sudden it works exactly how I want it! :)

    Hope this helps someone in the future...

    Hello

    Try the steps mentioned below and check if the problem persists.

    (a) click Start, point to control panel, and then click sounds.

    (b) click on Speech and Audio devices, click sound, and then click Audio devices.

    (c) click the Audio tab look to the default device in the sound playback section, click the drop-down menu next to the audio device name tab and looking for headphones.

    (d) change the audio device may require that restart you your computer.

  • HP pavilion g series: no sound through the speakers

    If the laptop is showing all the drivers etc are correct and it works even shows her on the equalizer with the background of the right speaker symbol However im not receive no sound at all

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59154.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When finished, stop the laptop.

    Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • Satellite M305D: No sound through the headphones but the speakers don't work

    Hey,.

    I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

    However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

    I don't know if the socket has worked before I refomrated.

    So I can't tell if it's a pre-existing condition.

    Assistance on the issue of the helmet would be greatly appreciated.

    Hello

    Have you tested with another helmet?

    Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
    In this case the question would be related to hardware

    I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

  • I can't hear sound in my headphones on my laptop but I can hear the sound through the speakers

    I have a laptop Toshiba A210, he has a lot of Windows Vista. When I watch a video and listen to the speakers I can hear it. But when I put my earphones in I cannot hear any sound. I went to control panel > sound > playback > in this screen the peripheral headphones appears as a disconnected device.

    I can not configure or test it and when I right click on it I can not set as default device.
    Help, please.

    Hello

    1 have had any changes made on the computer before the show?

    2. what happens when you try to set as default device?

    3. do you get an error message? If Yes, what is the full and exact error message?

    Method 1:

    I suggest you to make sure that the helmet is well plugged into the headphone jack.

    I also suggest you to test the issue with a different headset.

    Method 2:

    See the article and try to run the Troubleshooter:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • lost all sounds through the speakers & headphones

    I just watched a video on YouTube. left for a few seconds, returned, the video was stuck & no noise at all does not work on my computer. FixPro Microsoft failed to detect a problem and it is my computer. Help, please. Thank you.

    Hi ArleneHerring,

    I say follow the provided article and check if t help.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

Maybe you are looking for

  • Tecra A3 - 108 memory upgrade - which speed?

    Hello I bought my Tecra A3 - 108 3 years and everything works fine. But 2 GB RAM Windows Vista with certainty is not enough. I want to upgrade the/3 GB with 1 to 2 GB and 1 module of 1 GB. In-service tries with Apacer memory running at 800 MHz, but T

  • Pavilion dv7 docking station

    I want to know if the Pavilion dv7-6b32us will have a docking station.  I'm fairly certain that the answer is, but I would get confirmed.  Thank you.

  • MSN Gaming zone Backgammon

    insane, loading the game selects the opponent but then fails to open the game I deleted zone software reinstalls it but I can not play games on msn zone

  • Wants to follow the list of activities of the entire Windows + L in the server

    Hi we are using Windows Server 2003 and with nearly 150 client machines.I want to follow the customer journal of the events of the machine all the screen lock at the server, is that if a person in a machine client or Pressed (Windows key + L)I want t

  • How to install windows 7 on vista 64-bit with USB key or usb hard drive

    I use windows vista 64 bit on HP Pavilion dv9925nr. HL-DT-ST DVDRAM GSA-T40L ATA Devicedisappeared 'my computer' and 'Device Manager' list a few days ago. There is no upper and lower filter. Device is that in the "boot order" Start menu device someti