No sound when using Windows Media Player

Similar Questions

• distortion sound when using the media player but not any other media suite e.g., be able to go

  I have a new samsung 305th and sound playback for the media player is distorted on the helmet and built in speaker, but all the others like suite of media and power go her crystal clear. makes all kinds of settings and checked sound card, what is the problem? Fix, it has found a problem but says to contact the manufacturer.

  Hello

  1. what fixit did you run?
  2 were there any hardware or software changes made on the computer before this problem?

  Carry out the methods to solve the problem.

  Method 1
  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  Try disabling audio enhancements and check if that helps.

  (a) open her by clicking the Start button, then Control Panel. In the search box, type sound, and then click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

  Also remove the audio codec in Windows Media Player.

  (a) open windows media player, and then press Alt key.

  (b) click on Tools, select plug-in and click on the option.

  (c) select plug-ins tab, and then under category, click Audio DSP.

  (d), select all the files in the DSP Audio box and click Remove.

   

  Method 3: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See the help article
  Tips for solving common audio problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• Blue screen error 0x0000007F When using Windows Media Player

  original title: need help w/video

  my hp Pavilion a1240n crashed to the point that I had to replace the hard drive and reinstall windows xp, then go to 7.  After 2 1/2 weeks of the trial, I am still unable to play a dvd, or get a video game to play.  If anyone can help me, chk the specifications of what I have and give me some options on what I can try.  The last time I tried WMP, I received a stop message 0x0000007f blue screen.  Help!

  A few quick to test things:

  Test your memory with a memory tester. Something like http://www.memtest.org/ perhaps, or an equivalent.

  Update your graphics card and sound card drivers to the latest W7 drivers available at HP for your PC.

  As test, download and install (free) VLC. Can do this reading of videos? In a first time, as this is just a test, do not let 'take over' as a default player until / unless you're happy with it. Just manually open a video with her.

  If you look in what is your WEI score and the base system in detail, i.e. amount of version W7 ram, CPU, and what is your GPU card?

  Basic details of 7F - http://support.microsoft.com/kb/137539

  Armed with a little more information, a person may be able to help more.

• "Access denied" message when using Windows Media Player on my windows based computers.

  Put all my music on an external hard drive.  Meticulously organized all the metadata on my Windows XP PC WMP (version 11) and my window 7 PC WMP (version 12).  Now, I get an "access denied" message for my music folder on my XP machine.  The new WMP restricted me to access this folder on all, but my Windows 7 box?  I take my external hard drive from room to room (study, gameroom,...) so I can listen to my music wherever I go in my house.  Should what changes I make to allow me to listen to my music on my different computers?

  Make sure that the group Everyone has read at least the permissions on all the objects on the disc.  Set the permissions on the root folder and then use inheritance to propagate permissions to all items on the disc.  See here for the typical instructions: http://windows-xp-full.net/Que-Special.Edition.Using.Micr1/0789732807/ch28lev1sec8.html

  John

• Scratchy Audio only when you use Windows media player

  For more than a month now, when I use Windows Media Player 11 to play any audio file, the music sounds saturated and rough. The volume is louder than normal. It is on a 5 year old XP PC, and I haven't added new software or hardware lately.  I can play the same files on the same PC with other readers multimedia (VLC Media Player or Quicktime) and I don't have this problem, and it's okay if I use headphones or speakers. I tried to uninstall WMP11, but WMP10 has the same problem, and when her reinstalled WMP11 still sounds bad. I have also reinstalled the codecs windows audio. Any ideas?

  Check the audio improvements and put them all turned off:
  Begin playing a file and then click the arrow below the now playing tab, point to enhancements, click show improvements and then go through each of the options.

  You can also check and disable plug-ins:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-plug-in-to-Windows-Media-Player

• You met the C00D10D1 error message when you use Windows Media Player

  Hello

  I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

  You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Codec is missing

  Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

  The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

  Hello
   
   
  1. What is the file type or extension that you try to play?
  
  If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
   
  See also:
  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error when you try to play multimedia files using Windows Media Player C00D11B1

  Error C00D11B1

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  =======================================
  No guarantee... but the following links may be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

  Another possible solution:

  Q: error code cood11b1

  A: Try the following...
  Open Windows Media Player and go...
  Tools / Options / tab player... Uncheck the...
  Connect to internet / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• C00D11C8 error message when you use Windows Media Player

  How to fix C00D11C8 error messages when you use Windows Media Player.

  I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

  I downloaded the GoToMeeting codex and the problem was solved.

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• I have Acer Aspire 5735Z computer. Using Windows Media Player, I can watch a DVD, but have no sound.

  I have Acer Aspire 5735Z computer. Using Windows Media Player, I can watch a DVD, but have no sound. checked speakers that work well in other applications. IE I can download music from the internet.

  original title: can play a dvd. a picture but no sound

  Hello

  1 is this specific problem with a particular DVD playback?

  2 did you change on your computer before this problem?

  3 have you tried to play the DVD in another computer?

  4. What is the format of the video file?

  You can follow the suggestions and then check.

  Method 1

  a. open Windows Media Player.

  b. click on Tools.

  c. click on Options.

  d. click on devices.

  e. click on DVD and select Properties.

  f. ensure that Rip and playback are digital.

  Method 2

  You can download and install the latest codec of your favorite search engine.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Method 3

  Another possible reason is your audio driver. If the problem persists, I suggest that you download the latest audio driver from the manufacturer's website and install.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Play an audio or video file

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file

• When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  When you try to use windows media player, the wmploc.d11 file has a version number of 11.0.6002.18311 where to 11.0.6002.18111.

  The following article is maybe worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Failure to solve the problem... and if you
  are comfortable editing the registry... it
  may be worth a try to remove the following text
  Registry keys:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmp.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\wmploc.dll
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\\wmplayer.exe

• I keep getting out of memory errors when you use Windows Media Player.

  original title: of memory error

  Hi, I have a Windows 7 PC brand new with 12 GB of RAM, but I get low on errors of memory, especially when you use Windows Media Player. I tried:

  -Execution of the antivirus scans

  -Cleaning things out of the startup folder

  -Increase in the size of paging file

  I can't understand what the devil is the cause of this error - as I said, it's a new machine, and is not practically nothing on it yet.

  Any help is appreciated.

  Hello

  Follow these steps and check.

  (a) open 'command prompt' as an administrator (programs, accessories, right-click "command, prompt" run as administrator).

  (b) type the following without the quotes and press ENTER.

  "for %a in (% systemroot%\system32\wm*.dll) do regsvr32 /s %a.

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• Portege R700 - sound only in Windows Media Player

  I have a R700 with the RealTec sound when you use Windows media player, but not when you try to listen in flash, video, or audio system PC.

  Can anyone help?

  Hi Artrek,

  What it means that the sound card is properly installed and you don t have yellow exclamation marks in Device Manager?

  Hmm generally with each program, you should be able to listen to audio on flash videos I would try an update of Adobe Flash Player. Make sure that you have installed the latest version of this program.

  The sound settings, you can check the Windows default audio output device. Make sure that the internal speakers are the default settings.
  By the way: If you see this problem with external speakers too?

• I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop

  I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.

  I could at some point... but now all I get is audio, no video.  The files open and work on

  my laptop that also uses Windows Media Player... but for some reason now... nadda.  Seemed

  This all started when I upgraded Windows more late service CAP and also installed Real Player.

  Help!

  Hello

  • What version of Windows are you using?

  1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.

  2. the link provided below lists supported by Windows Media Player file format.
  It does not list the AVCHD or. MTS files supported file format directly:
  http://support.Microsoft.com/kb/316992

  3. yet we cannot be sure at this point that the issue is due to interference with some files.

  Method 1:
  Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Method 2:
  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  
  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions