No support of acceso directo a SAN

Similar Questions

• Acceso directo a sin cabina switch support

  Hola a todos

  Me ha EDI a compañero as en UN evento cierto very letras, dijeron that vmware manufacturer none that supports fibra entornos no tengan los por medio switch, decir los vayan directly connected host has the cabina. ¿OS sounds that can ser cierto? o well mas como UN farol para yo pienso that include extra pass?

  Yo pienso that if el esta hard en hcl, soporte of da VMware.

  Gracias!

  VCP 410

  Mira esto:

  Fiber Channel without

  For SAN Fiber Channel, if listed, VMware supports the following configuration, the bottom of page otherwise unless:

  • Basic connectivity - the ability of the host ESX to recognize and

  interacts with the storage array. This configuration does not allow

  for multiple paths or any type of failover.

  • Multipathing - the ability of ESX hosts to manage multiple paths to the same storage device.

  • HBA failover - in this configuration, the ESX host is equipped with

  several HBAs connect to one or more SAN switches. The server is

  robust to HBA and switch failure only.

  • Failover storage Port - in this configuration, the ESX host is

  attached to multiple storage ports and is robust to storage port

  failures.

  • Boot from SAN - in this configuration, the ESX host boots a LUN stored on the San rather than a local disk.

  • + Direct Connect - in this configuration, the ESX host is directly

  connected to the Bay. There is no switch between HBA and the table and

  each HBA should be connected directly to a port on the storage array.

  Multiple storage ports also known under the name of FC target port on a single fiber

  Channel-Arbitrated Loop are not supported; as a result, Garland of

  ports of storage within a storage controller, overall storage controller, or

  across several arrays are not supported. Windows failover clustering is

  not supported in this configuration. +

  Viene HCL:

  [http://www.VMware.com/resources/Compatibility/Search.php?action=Search&deviceCategory=San&ProductID=1&advancedORbasic=Advanced&maxDisplayRows=50&Key=&Release] = 74 & datePosted =-1 & partnerId [] = 43 & [] arrayTypeId = 2 & isSVA = 0 & rorre = 0

  Click on "Click here to view introductory information" en casi al final.

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• Network Red functions of Red corporate DirectAccess Area of trabajo Trabajo Acceso Directo

  No puedo tener Aceso wifi

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Hope this information is useful.

• Porque no permite apply icono cambio an acceso directo .pif en el desktop?

  Windows 7

  Create a shortcut

  Right click on the shortcut

  Click 'properties '.

  Click on the button 'change icon '.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Duda con disco RAW expressions has a VM

  Hola y buenos dias.

  Tengo una duda was the hora of dar una lun one virtual una Máquina.

  the digo at the VM Qué quiero UN HD en modo 'RAW device Mappings' simplice escogo cual're y digo as lo con store the vm (in este punto cuando voy a los estorages veo that crea otro fichero del tamano of the LUN pero not "gangsta" espacio en el propio estorage por lo than tiendo're solo UN puntero) ,

  y duda llega aqui in the siguiente what refiere al compatibility Québec modo da 2 options (virtual y fisico) no tengo clara the difference between these 2 y cual are over-tightened porque a mas cuentas fin not already ser a enlace directo a una lun.

  Alguien me can arrogar a luz poco sober este tema

  Gracias y a greeting

  Hola irasines:

  Dispones de la información aquí http://pubs.vmware.com/vsphere-4-esxi-installable-vcenter/topic/com.vmware.vsphere.esxi_server_config.doc_41/esx_server_config/raw_device_mapping/c_virtual_compatibility_mode_compared_to_physical_compatibility_mode.html

  In definitiva, RDM physical permite an acceso directo a SAN ejecutandose the majority of the comandos SCSI in su lado no permite through snapshots of VMware; Virtual RDM permite an acceso directo a SAN ejecutandose los comandos SCSI in el VMkernel y if permite hacer instant through VMware.

  Entornos cluster physical/virtual're obligatorio usar el tipo RDM fisico.

  A greeting.

• Download and store the pdf file into a Local support

  I generated a PDF with top of desktop PC and uploaded to Adobe Acrobat DC via the Acrobat.com. I can preview in a cloud of Document by opening Adobe Acrobat is installed in the iPad.

  Question: How can I download the file and place it in a Local of the iPad support?

  Hi Kishida-san,

  Unfortunately, there is no this option, but once you download the file of cloud, a copy of it is saved on the device which you can access without internet connectivity.

  In addition, you cannot copy the file from the cloud to a specific folder on the device, but you can copy a file from local storage on the device to the cloud.

  In addition, this link appears corresponding to your query: https://forums.adobe.com/docs/DOC-5782

  Hope that helps

  Kind regards

  Rahul

• web Camara, como encenderla

  El saber como hacer funcionar web camara be grounded en mi equipo, is that el acceso directo knew desaparecio operation. Gracias a quien can help me.

  HI Maria,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• error 800645

  Hola disculpen mi desconocimiento, pero... error UN that are 800645? framework of he intentado fornuis el are only any use none of las herramientas Office porque puedo me as no hay a mistake in el acceso directo o Quebec no instaladas estan, tengo windows vista there is tapeworm habilitadas las plots automaticas. Cuando me compre the sony vaio computadora, fled a UN tecnico oficial electrodomesticos where the want a local led me las instale por lo tanto no tengo idea TR're oficial o no, aunque purchased a product number. Disculpen soy disaster informatico y realmente no tengo idea of do

  Hello
   
  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language above, support for additional international sites options are by following the link below: http://support.microsoft.com/common/international.aspx

• Do I make a PDF Pack shortcut on my desktop?

  Contratado HE Acrobat PDF Pack El y no encuentro al servicio formation of access has no ser Québec comes into el me don't ship ha enviado Adobe y click en el enlace. is posible crear an acceso directo in el desktop?

  Hi angelm,.

  Depending on the browser you are using, you should be able to create a link to https://cloud.acrobat.com/createpdf and to put this link on your desktop for easy access. For example, here are the instructions to do this in Firefox: https://support.mozilla.org/en-US/kb/create-desktop-shortcut-website

  Best,

  Sara

• virtualizar infrastructure

  Hola,

  Tengo as montar una respond para una application, el scheme e infrastructure Quebec me so esta pensado in una fisica, yo estoy pensando in pasarla structure a virtual, creo are mucho mejor.

  Infrastructure practice:

  -2 QC (minimum 2 GHz) cpu con Servidor con 16 GB of RAM / S.O.: W2003 2008 Enterprise.

  -Storage 100 GB (netos) (cell conexion al servidor bbdd SAN). Toda en high availability (HA) infrastructure, storage replicado y servidores clustered Activo-passivo (el servicio bbdd) (sincrono)

  -License BBDD Oracle para 25 nominal version estándar GR 11, 2 users.

  -Especificacion tipo, puesto del client (Pc)

  Chasis

  Arquitectura BTX

  Chipset (minimo)

  Q45 Express con

  ICH10D

  Disco duro

  160 GB S - ATA

  Memoria (minimo)

  3072 MB (2 GB + 1 GB)

  Procesador (minimo)

  5300 E

  Operating system

  Microsoft Windows XP

  Sequence of the architecture practice: ver imagen adjunta

  Estoy pensando in montar 2 ESX in CPD cada uno

  2 processors 6 hearts

  48 Gb of Ram

  8 red cards

  VmWare

  Máquinas office (oracle, application server, terminal Server para run the application server)

  2 cabinas ISCSI AX4 EMC software con 5i of Replicación sincrona tipo.

  4 switches

  The duda is me plantea are if you need clusterizar los servidores con VMware is 'covered' esta necesidad o tr.

  OS thank any observacion o mid-week.

  Gracias.

  Saludos.

  Hola,

  Virtualizacion of the respond planteas're totally achievable, además are documents good practices con y para virtualizar Oracle methodology. ECHA a vistazo por los KB of VMware y Fiesta information.

  Respecto el acceso directo than say at the cabina, Debera¡s el raise TR disco that going to an asignar an Oracle will a ser con el con o Windows iSCSI initiator el datastore are asignado por parte of VMware.

  Respecto has the Replicación, lo has into account if going to usar los CPDs como o Activo/passivo Activo/Activo,'re decir, corriendo todas las VMs en a host o repartiendolas en ambos. Con las tarjetas 8 okay, asi podras redundar todos los servicios como production, vMotion, administration e iSCSI.

  Necesitaras clusterizar los servidores, el reason are Québec HA of VMware TIENE PARADA, are only the virtual machine if desde cero arranca otra sufre caida. While if you have a cluster No. HAY PARADA. At into account than spend the respond are designed as client no. QUERRA PARADA are only Replicación sincrona el con el coste that supone el software EMC + cabinas las 2... por lo tanto have than 2 Windows Enterprise montar con el coste as acarrea.

  A greeting.

  -

• LUN showing sufficient free space but VMware showing low on space!

  Hello

  I have a very strange problem on a loan SAN, I don't have on hand the model number for the moment, but it's a PS6000 with NL - SAS drives.

  When I look in VMware to the DRLUN01 it seems that there is only 149 GB of free. When I look at the same SAN logical unit number, he says he has 985 GB free!

  

  

  The SAN is running the latest firmware and is connected to a server ESXi 4.1.0 through iSCSI. The LUN contains replicas of Veeam my production systems. When I talked to Veeam they notify that they have seen this twice but only know that Dell has solved the problems.

  As I'm not offered no support, even if I'm likely to spend August 20 k with Dell and have the Support Pro on my production SAN, I was wondering if someone can get ideas?

  Thank you

  Greg

  If you have allocated (from the point of view ESX) all your space so it is a different matter.  ESX needs free space to work properly.  Temp files, the swapfiles, newspapers and snapshots of VMware.   For example, I usually create volumes of 600GO (in general), I leave at least 100 GB free.  If that gets close, I create a new data store and move the virtual machines or simply create the new on the new data store.

  Re: ESX knows.   Basics of basic/SCSI disk.  At the level of the storage disk, there is no "files" there are only blocks.   Each block has an address, called a LBA, logical block addressing.  Each volume (disk) reports so that its ability to the controller.

  The volume (disk) starts at LBA 0 and goes to the LBA The ESX server keeps a table of total blocks and when you make an entry, it selects and for use LBA.   LBA (and data) are written in the volume (disk).

  The table knows also how each volume is great, so he knows how many blocks there.   ESX server sends that data with the LBA ESX choose to use, at the same time, it will update the allocation table which is on this VMFS volume...  The table can then locate LBA (X) and write the data here.

  So, since you gave us (X) MB, we can infer that from the free space of the total volume.   Works fine as long as you never delete anything.   A removal of ESX is a WRITING on the VMFS allocation table.  We record this writing as others.   There is nothing to say the array, AMLA (X) is no longer used, so return to the Member's area.   This is where the new command comes in cancel the MAPPING.  Now the server can send a command that tells unallocate (free) LBA (X).   Use space will go down and free space on this member will go up.

  Re: Re-use of Array.   So since it's the ESX Server that determines the LBA to use, it will be re - write down as needed.

  Re: Free to the declaration space.  # Important indicator is what the operating system said, not the table.  Finally when SCSI UNMAP is indeed those two will be much closer together.   If a VMFS volume goes to 100%, you're in trouble.   ESX will no longer be a LBA list to choose from.  Entries will fail and VMs will go down.

  The table in use is assistance to make sure that you attach no more space than you did.

  That is if you had a table of 2 TB, you can create a volume thin MUCH bigger than available.  But up to what you actually write more than 2 TB, of a data value, you're fine.  If you do, then the table runs out of space and volumes to disconnect and all virtual machines would stop.  This gauge to judge when to buy more storage.

  If w/o UNMAP, finally the EQL GUI does NOT reflect the free space for a volume.

  Bottom line, follow what ESX (or any server) said being used and free space on a volume.

  Best?

• Close VMWARE al close una maquina virtual

  Estoy probando tool VMWARE por primera vez. He has achieved include una Máquina virtual XP of a team that corre con W7 dentro.

  También he achieved mediante VMRUN y I START crear an acceso directo that abre the desde el solo con Desktop 2 click XP virtual machine.

  Ahora El saber if possible Quebec, al close el XP (Inicio / Apagar) al cerrarse the virtual machine not me only the ventana abierta VMWARE. A worm if me explico, quisiera apagar Windows XP (mi Máquina virtual) y what cierre VMWARE automatically. Is esto posible?

  Desde is muchas gracias, y aprovecho para desearles a buen ano.

  Steinhaus

  Tranquilo...

  Para of you doy una variant than quieres hacer lo. In el screenshot editor are posible Québec una Máquina virtual este arrancada sin ventana of VMware, asi puedes entrar por 'Remote Desktop' sin necesidad of that VMware is one abierto administrarla, cuando y Niños apagar the ventana no estara.

• Bloquear maquina virtual en pantalla

  Now that metiendome in el tema Las estoy virtual machines... Is the virtual machine arrancar manera alguna y bloquear one el usuario no dirty ella can?. Yo para correr a scada (that works solo sober NT...) sistema y uso las VM claro, no me interesa me salgán al HOST... The use of VMWare Workstation now.

  Saludos!

  A las buenas

  Recuerdos of Quebec gave traido Samquejo con Lucio Perry y known Ciber control jejejejejejeejeje. Como aquellos tiempos counter, Quake, Diablo anoro y mIRC jejeje.

  Ruben algo that you can use are lo explican http://blog.gr80.net/post/autostart-vmware-workstation-machines-automatically-upon-windows-restart/, deberias if mirar aqui hay alguna opcion para lanzar application is a pantalla completa.

  Otra opcion are that mrge UN ESX 4.0, you cries ahi las maquinas Office NT back y mediante el Servicio Web has ESX descargues el acceso directo icono has the virtual machine in los los operarios products escritorios.

  A greeting.

  -

• Rdm VMDK

  Buenos dias,

  Pongo este post porque tengo unas dudas, a worm if me podeis las resolver.

  The current situation are the following: I have a vm with a db2 en W2K. Hemos pasado UN entorno Vmware Workstation al entorno ESX 3.5 than we have. Segun amendments say, el servidor tiene a respuesta al superior than antes tenia tiempo. Hemos comprobado performances y hemos visto that has a disco problema (una CX4480), seems that already processes the cola del disco en. Hemos probado mil things (stocks, paginacion...) y sigue igual.

  ASI lo vamos a test are vmdk pasar a Raw disco in modo fisico, segun than he visto, tiene an acceso directo has the lun sin pasar por the ability of virtualizacion (if me equivoco corregirme). Pero cuando hago todo el proceso con las vmkfstools me not of as el destino disco none are physical.

  Data:

  Location of the VM that wants to convert: /vmfs/volumes/LUN186/VM1/VM1.vmdk

  Target location: /vmfs/volumes/LUNRAW/TEST-RAW.vmdk

  Destino Disco: / vmfs/devices/drives / vmhba2:1:187

  Esta manera el comando Québec me is are this:

  vmkfstools-i /vmfs/volumes/LUN186/VM1/VM1.vmdk /vmfs/volumes/LUNRAW/TEST-RAW.vmdk d vocation: / vmfs/devices/drives / vmhba2:1:187

  Cuando lo ejecuto me appears el siguiente error: "doesn't have to clone the drive: the specified device is not a valid physical disk (20) device '

  y aqui me quedo. BUSCO information pero no encuentro which are the problem.

  A worm if alguien me can echar una mano...

  A greeting

  Buenas

  Prueba an el disco RDM pinchar y el vmdk in una VM valere is clonas UNO a otro con o similar ghost

  Despues con you original VM para as solo vea el destino rdm disco

  If esta u otra respuesta're util, por favor su marca used notificador.

  Gracias / looks

• SAN HQ on Windows 10 Support

  Any idea when the installer SAN HQ will be patched to support Windows 10?  Right now it won't install not because he thinks that .net 4.5 is not installed, when it comes with 10 Windows by default.  Guessing the installer is simply not set up to correctly detect.  Thank you.

  I realized a work around that.  Install SanHQ 2.6 on your machine windows 10 then when it opens it will say the version is obsolete and it will upgrade.  On the Server Setup does not check for .NET 4.5.