No tab parameters of Port in Windows Vista

Similar Questions

• Stealth Ports in Windows Vista SP2

  PROBLEM: I am unable to open the ports to download and run programs on the internet. All programs at all either. Whether it's Malware bytes, Spyware Doctor, Panda Antivirus, World of Warcraft, League of Legends, The Sims 3 Downloader and so on. I have spent countless hours trying to figure out what he should do about it and can not get what it is.

  It's Windows Vista Home Premium SP 2.

  < complaining="">I'm so sick of this issue. I built this computer 2000 dollar with my bare hands and without help, I build computers for friends all the time, I'm working in technical support for computers for a living. But I can't get this to work! I'm quite frustrated to complain to this topic in depth on a microsoft forum! And the only reason I complain on the forum because he asked my product ID and then a not accept even if I threw this operating system to $ 200 and have the ID of product directly on my screen at this moment and caught 4 times and it wouldn't recognize it as a real identification. UGH.< complaining="">

  Please help me.

  Estifanos,

  This is how I could solve this problem:

  1. Connect your PC directly to your internet modem. It connects properly? If so, you have hit the nail on the issue to your router.
  2. I'm assuming that the question is not associated with router. This question is rather a firewall problem. Try to work in Mode safe mode with networking and see if you are able to get one of the programs to connect.
     http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  3. If the Safe Mode with network works, you can perform a clean boot in order to identify the startup item, the origin of the problem:
     http://support.Microsoft.com/kb/929135
  4. None of the above help? Disable the Windows Firewall and see if you are able to connect:
     http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  5. He still does not? Remove your antivirus and firewalls you have installed. I would recommend using the AV. removal tools Here are some of the most common:
     Norton: http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US
     McAfee: http://service.mcafee.com/FAQDocument.aspx?id=TS100507
     Panda Internet Security 2009: http://www.pandasecurity.com/homeusers/support/card?id=60027
  I hope that those of you will help identify the problem and take appropriate action. Let me know the results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there as a resource for a list of parameters available for the Windows Vista Edition accounts service Home Premium x 64?

  Original title: suggested settings for the service accounts for vista Home prem x 64

  Is it a rsesource for a list ofs suggested settings for the service accounts vista Home prem x 64?

  Hi elmjyo,

  You try to interact with any server? If so, what kind of server?

  You can follow this link & check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-to-create-service-account-in-Vista-Home-Basic/598cd8b4-e35a-4d67-aab9-07651aa5d52c

  Hope the helps of information.
  Please post back and we do know.

• How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

  Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

  Hello

  Thank you for keeping us posted.

  Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

  Consult the manual of the manufacturer, to do the same thing.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Hope this information helps.

• I can't open up a new tab in the same window when I click on the little + next to the first tab. How it works on FF4 for Windows Vista?

  I have a labtop Sony Vaio with Windows Vista, just updated for the new Firefox and now when I go to add a tab in the same window, it will not allow a new. I clicked on the + thing button/tab a bunch of times and nothing happens. What can I do to fix this? I'm not very computer so the step by step instructions would help a lot. Thanks for any help.

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• I had to put my laptop to the original on the parameters of the box and now I can not get all updates for windows vista home preimum

  I have reset my Toshiba laptop for the orginial on the parameters of the box using my recovery disk that came with the laptop when I bought it years ago. Now reinstall and update of windows, I can not service pack 1. He said that the system may reboot several times, blah blah blah, it is said installed. I just want this computer up-to-date with all the updates. Its use will be mainly internet, e-mails and word documents. Help, please

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• my task manager on windows vista family premium does not show the tabs before and used to work properly.

  my task manager on windows vista family premium does not show the tabs it used to, when I used to open the Task Manager it would be things like 'process' 'services' 'preformance' ect. in the tabs. but now when I open it it shows just a window that has two columns, one labeled task, and other labeled status. It shows what im running, but there any options at all as the winger treat ect. the window is not even an exit or minimize the icon as other windows are in the upper right. the only way to close it alt f4 do - what I do? Ive already tried to restart the computer, and I'm on the only account to administer it. I have a screenshot of the new manager of task here: http://i1119.photobucket.com/albums/k621/a_bakedpotato/vistataskmanagerisue.jpg

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Why Windows Vista Home Premium squeeze all my open tabs in the right side of the taskbar?

  Normally, the tabs open or reduced are distributed on the task bar, which allows you to see about 8 or nine tabs in the taskbar. Recently, however, they all push in the far right of the taskbar, allowing two only is visible at a time. If I opened more than two, I have to click a scroll button to scroll through my tabs. Why is this happen and how can I get back to normal?

  All other spaces in the taskbar is open and unused.

  Hey Evan 1010,

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Make sure that the toolbars options are not enabled on the taskbar. Follow these steps:

  (a) open Taskbar properties.

  (b) go to the tab toolbars, clear all options.

  (c) click on apply and ok.

  Add a toolbar to the taskbar

  http://Windows.Microsoft.com/en-us/Windows7/add-a-toolbar-to-the-taskbar

  Method 2: Also, make sure that the option never combine is selected in the taskbar buttons. Follow these steps:

  (a) open Taskbar properties.

  (b) go to the tab of taskbar, under the taskbar appearance.

  (c) select the option never combine for the taskbar buttons tasks form the drop-down list.

  (d) click on apply and ok.

  Change appear on the taskbar buttons

  http://Windows.Microsoft.com/en-us/Windows7/change-how-buttons-appear-on-the-taskbar

  Method 3: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Provide for the issue of the screenshot.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• am running windows vista on dell inspiron1501laptop.installed new hard drive and ports usb recognize when the new device is plugged, but impossible to find / or install the drivers

  Recently, I replaced my drive hard because kept pc quit unexpectedly.
  am running windows vista 32 bit. on a dell inspiron 1501 laptop. Since the departure of
  the hard drive, when I try to use my SD card reader or usb ports, my pc recognize
  a device has been plugged in but can not locate or install the necessary drivers.

  You reinstall your drivers? Go to Device Manager and check your devices for problems. Usually with yellow and red symbols.

  Dell support
  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS
  Click on drivers and downloads

  Enter your Service tag or select your model

• Windows Vista - why my usb ports stopped working, and how do I fix them?

  My 3 usb ports worked very well, but a few days ago they just stop working.  I updated the drivers even though my drivers were already later.  I even tried to update the drivers.  Nothing seems to work.  Can you help me?

  Hi WillisPop,

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Use Device Manager to disable and re-enable all the USB controllers

  This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  1. click on Start, type Device Manager in the start search box and press ENTER.

  2. expand Universal Serial Bus controllers.

  Note: you may scroll through the list to find this point.

  3. right click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  4. repeat the above steps for each controller USB is listed under Bus USB controllers.

  5 restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  6. check the USB device to see if it works.

  You can also check out the article below for more information:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

• No printer Listed Port - can't get any printer to install on Windows Vista Home Premium - Please HELP!

  I was able to print to a Hp Officejet 4215 with no problems and a brother and then printer started to save as offline and would not print. Uninstalled all printers and tried to install a new HP Officejet 6310 printer. Ran the install disc included, but would get the message error, is went to the HP site and downloaded the driver, still received the error msg - Windows found a driver software for your device but encountered an error trying to install it. The specified port is unknown. and installation of the device software has no error. I went into control panel / Device Manager / USB controller group / and tried to uninstall - restarted the pc and still no luck. When I go to the control panel and try to install a printer, there is no port printer not listed and I can't add a new port.  I have connected the printer to another laptop running Windows Vista and recognized the new printer and installed the drivers and the impressions very well, but this laptop will not load the drivers. Help, please... Im a university student and desperately need to print!

  Hello

  All ports are used, and this is the reason why the installation goes through. We can uninstall these devices that are not in use and then try to reinstall the printer. Here's how:
  a. start, point to all programs, point to Accessories, and then click command prompt.
  b. at a command prompt, type the following command and press ENTER:
  Set devmgr_show_nonpresent_devices = 1
  c. type the following command a command prompt and press ENTER:
  Start devmgmt.msc
  d. troubleshoot the devices and drivers in Device Manager.
  NOTE: Click Show hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.
  e. now navigate in imaging devices and then Device Manager expand it. Check if there are any devices that are not highlighted or blurred. Right-click on these devices and choose uninstall.
  f. repeat the same Universal Serial Bus controllers also.
  g. now try to install the printer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista: 127.0.0.1 is not configured to connect to port 8080

  Hello

  Using Windows Vista, I installed Oracle XE, but trying to access to http://127.0.0.1:8080 / apex I get the below error.

  127.0.0.1 is not configured to connect to port 8080 with this computer

  Anyhelp will be highly appreciated.

  Hemant

  Go to start / Control Panel / Security Options / Windows Firewall / change settings / Exceptions / select Port / and add port 8080 and click OK.  See if that solves the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems in porting windows vista 32 bit on a 64-bit Windows 7 machine device driver

  Hello

  I'm porting windows vista 32-bit on windows 7 64 bit machine printer driver. I have compiled DLLs. When I add printer and load INF file, I get the message that this driver is not compatible x 64 driver. Please tell me what adjustments should I do in the INF file.

  Thank you.

  Go to the printer manufacturer's website and download the right driver (free) for your operating system. You should also disable automatic windows update - Start, made driver installation computer right click go to the settings/settings/device installation properties / Advanced - value - not let me choose/never install updated win - save changes, remove previous attempts also to devices and printers, have the printer on but do not connect the usb cable until you are prompted - install driver downloaded.

  If there is no 64-bit Windows 7 drivers don't try the 64 bit Vista driver, if it does not work then you will need a new printer.