Question on USB.

Similar Questions

• TV 39L4353D - 5.1 to pllaying question stereo USB flash drive files

  Hello

  have recently purchased the above model, and will have questions game 5.1 Blueray audio files from my USB drive on the TV...

  Basically, I can change the audio channels via the remote control, but the only channel I can operate is a horrible English dub!

  The correct language is selectable, but does not play at all... any ideas?

  Thank you

  Hello

  In my opinion, you should check first if the same question would appear from different sources.
  I mean, you should check 5.1 movies playing appearance of DVD and BD discs that support 5.1

  In addition, you should check the manual for the video/audio codec and file format supported by using the USB interface.
  To my knowledge, not all formats are supported!

• Question about USB mouse help

  Can you get it someone please let me know if all precautions must be taken when using a mouse; usually is it necessary to exercise caution while connecting and removing the mouse from the USB port.
  From now on, the mouse is detected automatically and there is no icon for 'remove hardware safely '.

  Thank you very much

  Best regards

  Hi Karthik,

  the icon "Remove hardware" usually appears with resources such as hard drives, ADSL modems etc. who have the ability to buffer data, and it is necessary for this dump buffer to the device before it is disconnected.

  Your mouse is classified as a device of human Intervention, and as such it does not buffer all data therefore should not be removed "without problem". You will be completely sure just to unplug it when you need to.

  Kind regards

• Question about USB DAQ 6363

  Hi all,

  I'm new with LabView, currently, we plan to purchase NI DAQ USB 6363 to use the entry to read the value of the resistor, capacitor and a diode and use digital i/o to check the functionality of the analog shift register. I want to check if it is possible that NI DAQ USB 6363 to acquire communication RS232 function because I want to drive barcode interface on it. I'll use LabView to log the reading result of database (SQL, Access) to do some data analyzation. IM also confused on test bench OR what is the relationship between she and NI LabView? is this another software to install except for LabView?

  Thank you

  No, you do not connect an RS-232 device to the DAQ card. The RS-232 is connected to the pc. If your pc lacks a built-in port you can use a USB-> RS232 converter.

  TestStand is a test of the direction which runs tests written in several languages, including LabVIEW. He plans the tests determine the success/failure, record results, create reports, etc.

• Question about USB-ERB08 VI relay

  I just had a question of specific labview...  So for our relay VI (which works fine), we want to now that she continuously power on all seconds, instead of having to click the button a hundred times.  It seems it would be an easy solution, I'm just having hard time understanding.  I played a bit with "loops" and "wave" screws, but did not have much luck.  I have attached the VI for the relay.  Thank you.

  I can't write the VI for you because I don't have the particular VI you are using. Here is a screenshot of what the code should look like with DAQmx VI is used instead. This should help you understand my slightly better text.

• HP Sectre XT Pro Windows question 8 USB 3.0

  Hello

  I need your help with the following.

  I installed windows 8 on my spectrum xt pro and usb 3.0 Windows drivers do not work corectly.

  I tried the different usb 3.0 drivers (including intel one and still no luck).

  the port can read and write usb 2.0 devices, but when I plug an external device usb 3.0 devices freezes.

  all the solutions to this problem?

  Thank you

  Hello

  This is wat I found

  Try this link

• HP pavilion 17 e049wm question win7 usb

  Hi it :-)

  I just installed Win7 on my new e049wm Pavilion 17 and installed what I think are all the drivers (following the instructions in this link, on the account that Win7 seems to be unsupported for the e049wm so far)

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/looking-for-Windows-7-driver-of...

  It works pretty well, but my device manager still reports an unknown PCI device, SM Bus controller, USB controller and unknown device. In addition, two usb ports on the left side of my laptop don't work! : s there at - it gurus of support out there that might lead me in the right direction to solve this? Any help would be greatly appreciated, I would be disappointed to be forced using Windows 8 when it requires users to have accounts of microsoft simply use several 3rd party applications.

  Thank you and best regards,

  Dean Harliwich

  Hello:

  For the SMBus Controller, you must install the drivers for the AMD Chipset, which is the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  The PCI device to the first driver on the Web page below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  The unknown device needs this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4158&product=5388069&sw_lang=

• Question of USB connection? Office Jet 4500 g510n

  I have a HP 4500 g510n printer.  It works great as a home network wireless.  I noticed that there is a connection to printer cabe on the back of the case.  There is nothing in the mannual users on a cable connetion.  This printer may be connected to the computer with a USB printer cable?  Is the port to connect just one part of a multi-model standard case and not connected to anything for this model?   If it can be connected can manage both wireless and cable connection at the same time?  I have a pc I ' d electrician it but I have others who need to continue using the wireless.  Thanks for any information.

  Hello

  Any USB connection as part of its standard specifications of the printer support, it means that you don't connect the model 4500 with a USB wireless as well.

  Network and USB connections will not interfere with each other, you can use the printer with a USB connection to one of your PC and the network wirelessly with any other PC.

  Kind regards

  Shlomi

• question to usb windows 10 Alienware 2015

  

  Hello

  If you are currently running Windows 10 correct? Try flashing the system Bios to the latest version, click here for the download link for the Bios (the Bios version is for the Alienware 15 R1). After that, check the Device Manager again to confirm if it still shows the error.

• Recurring question Renesas Electronics USB 3.0 Host Controller

  Hello

  I get this question contextual all a few days/weeks/months and she has been driving me crazy, but I think I have narrowed down and would like tips are possible please.

  Question:

  USB 3.0 Host Controller error Code 10

  USB 3.0 ports front and back go dead.

  Cause:

  I don't know at all, I feel that perhaps it is TuneUp Utilities 2013/14 or maybe my smart phone Samsung Galaxy S3.

  Difficulty:

  Uninstall/remove up to present drivers, by restarting and installing fresh drivers do not work. He used also but the last 2-3 times, I couldn't get the error to go away as a result of this process.

  I talked to a technician Support of Dell by phone and by working together, we found to be a BIOS problem, since a full format of the PC still had the error when he brought upward once again, leaving only the hardware itself (USB 3.0 ports) or BIOS.

  Bringing F2 menu and make a F9 reset by default a F10 save and exit solves this problem, every time.

  So what is a BIOS issue or a compatibility issue?

  I know how to fix it temporarily, but I don't know the cause.

  Data sheet:

  Alienware Aurora R4

  3970 X 6 @ 3.5 extreme core I7 (turbo boost 4.3)

  NVIDIA GeForce GTX 690

  Windows 7 Ultimate 64 bit

  Internet Explore 10

  32 RAM

  Liquid cooled

  3 TB Seagate hard drive

  BIOS A07

  If you would like more information, please let me know.

  I have no discharge reports that the PC did not yet have a BSOD, but this is a replacement PC after the last (same PC and specs) had exactly the same problem and basically could not be fixed by a Dell technician.

  OK, that sounds good.

  What I might suggest at this stage is to put the service 'Windows Driver Foundation - User-mode Driver Framework' to 'auto' as this can help with any problem of detection:

  Start > type services.msc in the box "search programs and files", then press "Enter".

  In the right window to scroll down to the "Windows Driver Foundation - User-mode Driver Framework" service and double-click it and set the "Startup type" to "Automatic" > OK

  Then, restart the computer.

  Then, if Renesas USB 3.0 controller number happen can you create and provide the .evtx, and nfo files to the exact time.

• MTP USB device failed to install

  During the installation of the driver the USB MTP device fails. Four of the five categories work fine, but it fails every time.

  I'm not the only person having this problem, but I can not find this question on the support forum.

  Should I send the phone to USCellular?

  Should I send the phone to Motorola?

  or is there a solution for this on Microsoft or Motorola?

  Please notify

  Motorola or someone who has an idea on how to solve this problem.

  Question about USB drivers you have installed this driver on your PC:

  http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

  Driver USB Motorola 5.2.0 with MotoHelper...

  Poko

  Published by: Poko... you may need to uninstall the driver, reboot your PC and then reinstall USB with MotoHelper driver. Do not connect your phone until the driver is completely installed... try to reboot your PC before connect you your phone via a USB cable.

• strange usb performance disparity

  I was using a USB - 6221 BNC to control experience. Control, written in C++, software runs as a process from command line in Windows and is quite simple in its basic approach. It uses a polling loop to constantly query a single channel of analog input and a single output channel. Treatment of entry involves a set quite complex calculations (several of the FFT and some research complex tree). For the release, we essentially generate a simple string of digital samples that control a pulse generator. The program data are large (> 100MB) but fits comfortably in the physical memory of all systems, we test. We need low latency in response to changes in the entrance, so we try to buffer what about 0.1 sec worth samples of output at a time. This means that we must question the release at least 10 times per second to avoid the digital output channel underflowing.

  What we see is a difference of weird performance on different laptops. On a laptop computer, a system of dual-core AMD 64-bit with 4 GB of RAM, the software works very well. On all other systems that we test, USB activity seems slow processing so that we always have the overflow of the digital output channel. The time to process the analog input data increases by <20 msec="" on="" the="" "good"="" system="" to="">500msec on systems 'bad '.

  In a test version of the software, built with fake calls to the interface DAQmx functions, the processing time of the software is consistent with what we see on the 'right' laptop, even on systems of 'bad '. So we are certain that the actual processing time is in 100 ms or that we face at the exit. However, as soon as we establish with the libraries OR "real", the performance is reduced by an order of magnitude.

  It comes with NOR-DAQmx 8.6.1 (that we use for historical reasons) on Windows Vista and XP. However, the upgrade to 9.2.2 does not affect performance. The faulty systems are all 32-bit Windows, so I guess that it is a possible cause.

  Are there known issues with performance USB that would explain this? I'm happy to share the source code for the main program if it will help in the diagnosis.

  Adam,

  Here's the question - the USB-6221 BNC returned to a buffer which is identically zero when the input is disconnected.

  In my previous experience with data acquisition devices, it was generally safe to assume that some noises would come of an ADC. So it did not reach necessary checks to avoid division by zero if the signal energy and the beach were zero. The division but resulting in zero errors have not generated exceptions, simply slowed the calculations to a crawl.

  Sorry for the confusion.

• Dv6-7229wm Windows 8 for Windows 7 no USB 3.0 supports

  I have a HP Envy dv6-7229wm. I have almost all my drivers installed and running, except on Windows 7 Pro SP1 64-bit.

  It is a system of AMD with the APU A10 - 4600M / 7660 G HD / 8 GB memory / replaced 750gig HDD 250gig DSS

  I have 4 x (3 x USB 3.0 Ports) USB Ports & (1 x USB 2.0 Port)

  USB 2.0 Port works great!

  USB 3.0 ports offering power, but no info is detected by Windows 7 Pro

  My mistake: (!) XHCI USB controller compatible host

  I need Windows 7 to work as 8 or 8.1 is not supported. Can HP if you please help me with this problem. I'm on 4 hours of research on just this issue and I'm stumped.

  Again, everything works fine and as you can see in the Device Manager the ony question is USB 3.0.

  Thanks in advance for the help. Let me know if any additional info is needed.

  Plug connection http://support.hp.com/us-en/document/c03497773

  

  

  Hello:

  Download and install the driver for AMD chipset on the link below. The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• USB drive unplugged when wake up mode 'sleep'

  I use windows vista business version for my 6400 Dell insporon laptop.

  When my laptop wakes mode ensures, in the wondows login procedure, it seems he disconnected from usb drives to not communicate with windows at this time. One of the USB (simpletech 2 TB) was not connected (it loses the drive letter in windows Explorer). Two other brand always connected.

  If I recycle the power of this USB, it connects back.

  Simple question: where can I change once and for all so that I don't have to recycle that drive usb every time when you wake up mode 'sleep' (she becomes very annoying since this USB does not start button / stop)? Personally, I think it's microsft windows 'default login procedure question' no usb drive manufacturer bug (contact usb drive tech support).

  Thanks in advance for any help.

  Hello

  The problem is perhaps due to several parameters being off, and you can actually have
  go through the list again. It could be you have a hardware problem with
  the USB port or might have to reinstall Windows. Even if it is complex you need to use this
  keep track and not as a menu.

  Another possibility is to use a clean boot to see if something in startup is at least partially
  in the mixture. It is the only method of control similar to your idea about the login procedure.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx Rob - bicycle - Mark Twain said it is good.

• Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

  I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

  On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
   
  > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
   
  I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
  questions of cable is not HDCP compatible. (Rules of DRM Media Center
  apply).
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question