Windows Vista: 127.0.0.1 is not configured to connect to port 8080
Hello
Using Windows Vista, I installed Oracle XE, but trying to access to http://127.0.0.1:8080 / apex I get the below error.
127.0.0.1 is not configured to connect to port 8080 with this computer
Anyhelp will be highly appreciated.
Hemant
Go to start / Control Panel / Security Options / Windows Firewall / change settings / Exceptions / select Port / and add port 8080 and click OK. See if that solves the problem.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.
Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005. Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs. Have the free version of Malwarebytes, run regularly, nothing comes.
Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix
-
Windows Vista Build 6002, this copy is not genuine
I just update Quicktime and another, something to do with the overvoice for iPod (which I uninstalled it after I restarted my computer). He said now in the lower right of my screen
Windows Vista Build 6002, this copy is not genuine... also, after updatingand restarting my computer, I get a bubble telling me to activate windows
Help
AAARGH! :)
Has no task you!
For some reason, the operating system cannot correctly read the BIOS SLIC table that is required for automatic activation key OEM_SLP used here.
You must change the key to that on the link change the sticker COA product key using ghte on the system properties page.
You may need to activate by phone.
(This is another of your rescue machines?)
-
Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer
The link below has options to solve your problem of loop.
http://support.Microsoft.com/kb/949358>
04:17:0407/17/11
-
I'm trying to get my spell checker in Windows Vista to work, but it does not check my work. I put several spelled words and it always gives me a "Spell Check Complete" message
It can cause that. Their our dew case, where you can smell bad words and spell check don't pick them up. It wood help if their was also a check for two grammar...
Just an example... :-) Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
Error: 0XC004F050 Windows Vista Home Basic product key is not valid for activation
I bought this dell laptop 2 years. my laptop is to sometimes have blue error screen, but when I restart it, allows it to function normally. recently, when I turn on my laptop, my screen goes black and a box come up saying that the Windows Vista Home Basic product key you typed is invalid for activation.
Then he gives me 3 options
1. access your computer with reduced functionality
2. enter a different product key
3. contact Microsoft to help solve this problemI was trying to enter the product key as indicated on the sticker attached to the bottom of my laptop but still invalid product key. Code: 0XC004F050
I had
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 4WD8X - M9WM7-CH4CG
The Windows Product Key hash: EkdqJZ28Y9zyrh7DU/lHNjTXlQY =
Windows product ID: 89572-OEM-7332166-00096
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6001.2.00010300.1.0.002
ID: {B353C367-9E97-407C-A335-269CB0707324} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Basic
Architecture: 0x00000000
Build lab: 6001.vistasp1_gdr.100608 - 0458
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398
Windows XP Notifications data-->
Cached result: n/a, hr = 0x80004005
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Caching the result: 103
Version: 2.0.48.0
OGAExec.exe signed by: Microsoft
OGAAddin.dll signed by: Microsoft
OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Users\Tien Siew\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
Other data-->
Office details:
{B353C367-9E97-407C-A335-269CB0707324} 1.9.0027.0 6.0.6001.2.00010300.1.0.002 x 32 *-*-*-*-CH4CG 89572-OEM-7332166-00096 2 S-1-5-21-2878899211-3288161655-3842348923 Dell Inc.. Inspiron 1420 Dell Inc.. A07 20080203000000.000000 + 00034303507018400EA 0409 0409 peninsula malaise Standard Time(GMT+08:00) 0 3 DELL M08 103 103 Microsoft Office Enterprise 2007 12 fFic3JgCreGGRxyF8uMWB4R4Jcg = 89388-707-1528066-65881 14 ACD7202654E586 Content Spsys.log: 0 x 80070002
License data-->
C:\Windows\system32\slmgr.vbs(1635, 9) (null): 0xC004E017
Windows Activation Technologies-->
N/A
--> HWID data
Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEAnJ80kiKfGtPqTSSWoFyuf/yQRoPeS1K88vTm9 + 9aSGmsViqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value ValueOEMTableID
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
STARTING DELL M08
Original title: my windows vista Home Basic product key is not valid for activation
MCFG DELL M08
M08 DELL SLIC
SSDT PmRefCpuPm
How can I solve the problem? Thank you.
Run the Diagnostics of Genuine tool at this link http://go.microsoft.com/fwlink/?linkid=52012.
Hi steph_ts,
In addition to the suggestion of Andre.Ziegler, following links and check
1. you remember to make changes to the computer before this problem?
You can consult the following KB articles and try the suggested methods for error: 0XC004F050
How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
http://support.Microsoft.com/kb/938450
Error message when you try to activate a copy of Windows using the Windows Activation Wizard: "the Software Licensing Service reported that the product key is not valid: 0xC004F050.
http://support.Microsoft.com/kb/950756
Also see the following link for more information about reduced functionality mode:
Error message when you start Windows Vista: "your activation period has expired".
http://support.Microsoft.com/kb/925616/
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hello
I just deploy the tomcat in windows server 2008 and to test whether it is installed correctly. When I opened the IE9 and type in http://localhost: 8080, he goes to the homepage of tomcat successfully. However, when I slap http://127.0.0.1:8080, it shows that Internet Explorer cannot display the webpage (normally, these two methods are the same for the homepage of tomcat). Then I try to diagnose the connection problem. The problem found is - the remote device or resource does not accept the connection. The device or resource (127.0.0.1) is not configured to accept connections on port "8080".Then I tried the same procedures in my own laptop, there is no problem. So I wonder if there's some features are disabled on the windows 2008 Server. Can you help me?Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/categories/ -
Update Windows in Windows 7 will be not updated.
Error code 80244008.
Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".
You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I move my windows pc to windows 7 10 but its many problems.
can I roll back to windows 7, my internet connection is always troubleshoot 'device or resource (web proxy) is not configured to accept connections on port "8080".
First of all, I say I have windows 7 os in the office and we are connected to the network with BSNL Modem LAN cable. Its saying connected and access to the Internet but cannot able to access to any browser.
I can using only Mozilla Fire Fox his work but other browser do not work.
Hi Dhyan Singh Talodiya,
Thanks for posting your query in Microsoft Community.
I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.
- Are all the device drivers and Windows updates are updated?
- You have security software installed?
According to the description of the computer problem is cannot connect web proxy. The device or resource is not set to accept the connection on port 8080. The question might be if there is a corruption of parameters network or security software is limiting. Then, I suggest you to try the steps below and see if it helps you to solve the problem.
Method 1: Resolution of network performance problems.
Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.
Run the network troubleshooter utility:
Method 2: Are looking for connection settings:
1. start Internet Explorer.
2. click on the Tools menu and then click Internet Options.
3. click on the Connections tab.
4. by dial and VPN settings, click the broadband connection, click settings, and then click on automatically detect settings.
5. click on OK.Method 3:
Temporarily disable the software security and user account control exit ramp when connecting.
Follow the steps described in the article below to temporarily turn off the ramp of user account control and security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Enable or disable the User Account Control
http://Windows.Microsoft.com/en-us/Windows/turn-user-account-control-on-off#1TC=Windows-7
Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.
I hope this helps. Please let us know the results. Feel free to write us again for any further assistance. We will be happy to help you.
Kind regards
-
Hello
I have a year old Acer Aspire 5720 with Microsoft Windows Vista installed on it. Windows Update said I had to install a Service Pack, and when I let it go automatically everything seemed fine and update 3/3 went to 100% and then rebooted and said 'not installed the Service Pack. Coming back has changed. Do not turn off your computer. "This screen for hours or as long as the computer is turned on. I can't access either safe mode. The computer came with an installation CD. I can access the recovery menu by pressing F8. My stuff is not backed up either and I can't access it and I am really worried!
Looking forward to your help!
Kind regards
Sher
It's fixed! After about 3 days trying to solve this one!
Acer E tool safety program was causing some issues, preventing the updated files to a proposal!
Get rid of it, reboot and install SP2! :)
-
My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW.
How can I stop the update and close?
http://support.Microsoft.com/kb/555375>
It helps those answering questions if you provide:
What version of windows (32-bit or 64-bit) and service pack level.
you use what browser (exact version).
What application or antivirus security suite is installed and your current subscription?
What third-party firewall
What anti-malware software can be installed.· What are the updates that you try to install on the system?
If the update has failed then try these steps and check if that helps. I suggest you to let us know the number of KB updates.
Step 1
Uninstall the updates failed program and features, follow these steps
a. open Control Panel from the start menu
b. Select programs and features
c. click View installed upgrading
d. uninstall the update failed
Step 2:
Reset the component of windows update and then try to install updates, check if the problem is resolved.
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058>
Step 3:
Install the stand-alone package containing the updates. You can download the stand-alone version of the below link with number:http://www.microsoft.com/downloads/en/default.aspx> and check if the problem is resolved.
For more information click on the link below.
The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
-
Window vista business 32 bit auto update not install SP1
I have Window vista business 32 bit on Sony Vaio laptop. My automatic update of the window is on, a lot of updates were installed, I can't find the SP1. I checked the updates, saw "the view update history" but can't find SP1. Basic information system shows no service pack. 'Winver' shows Version 6.0 (6000 building). All other window updates have been installed except "Microsoft SQL Server 2005 Express edition service pack 3 (KB955706) who is still unable to install, do not know for what reason." I guess that there is no link between the failed SQL and SP1. It is after a complete reinstall of Vista 3-4 days back.
Prior to the relocation is in that the original version, Vista SP1 was installed automatically by the Update window.
I wonder if SP1 is already installed, but is not displayed or should I download and install it manually.goyalvimal
Thank you. I was able to install SP1 and SP2 after the changes and the process you described.
Thank you very much. goyalvimal -
Why Windows Vista Home Premium 32-bit installs not Windows updates?
I am not able to download and install Windows Vista Home Premium 32 bit windows update. This Gateway laptop has always been able to quickly and easily install the update by clicking windows update. However, since the introduction of Windows 10 it has been a lot of your time trying to install updates. I had this same problem with Windows 7 too. Never before there was no problem for the two operating systems. Installation of Windows updates has always been easy and fast without any problem. Running the troubleshooting isn't good and hunting error codes has been unproductive. What the hell is happening?
Hi Joe Cool1:
'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems. The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.
There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista. The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.
You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/. Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.
------------
32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS -
My Windows Vista suddenly says product key is not valid.
Hi, my windows vista family premium has been recently reisnatlled of the disks that came with the computer, and suddenly he says that the product key is not valid. I put the computer to get the product key and he came and he said that it was not valid.
Any help would be appreciated.Thank youScottHello
Use the phone activation method > do not follow the Auto guests > hang to a real person explain that you have reinstalled using the recovery supplied with your computer disks and Activation does not work.
It is explained in this link
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Windows Vista when I open the help file & support I get this error msg in the body of the glass:... "Help topic not found. This content under construction. We were able to retrieve the requested topic. "Please tell me how to get help & content & data support or fix this problem debilitating w/vista. Thank you
Hello
Thank you for writing to Microsoft Communities. From your problem description, I understand that you cannot open help and Support on the computer.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
1. have there been recent changes to the computer before the show?
Please go ahead and follow the steps mentioned below and later a update on the State of the question.
Method 1: Difficulty of Windows Desktop Search when it hangs or no display of results.
http://support.Microsoft.com/mats/windows_search
Method 2: Try toscanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 3: I can not open the help that was created in Windows Help format (WinHlp32.exe)
http://support.Microsoft.com/kb/917607
WARNING:
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registryPlease follow these recommended steps and post if you still experience the problem.
Maybe you are looking for
-
Satellite A300D - overheating issue and it stops itself
Hello Computer: Satellite A300D (PSAHCE) Bought my A300D two months ago. It was pre-installed with Vista, which, unfortunately, after a while, became so slow, that it was impossible to get anything done. So I decided to install Windows 7, the other d
-
What means connection 1394?
can you tell me what this connection is appearing in my lan or access connections section broadband internet?Mike Martin
-
Z800 upgrade RAM &; GPU - HP Performance Advisor WARNING
Hello guys,. I would appreciate if you can help me with this. HP Performance advisor, gives me the following warning: 'Memory '. Maximum memory performance is achieved with a balanced configuration memory evenly distributed throughout all channels of
-
Hi all I wonder how I can store data in a Subvi in the loop iteration (a so the shift registers) are in the mainVI (or in my case real, four levels on appeal VI). so far I solved this problem with a variable picture, but according to me, that's not t
-
I followed the instructions to load the OS disk, type expand C:i386\rundll.ex_ C:\windows\system32\rundll.exe, etc., but the error continues to appear.