No USB 3.0 or WiFi after installation of Windows 10
OS X El Capitan 10.11.4
MacBook Pro (retina, 15 inches, end of 2013)
10 64-bit home edition Windows
Problems that I encountered so far for which I found online solutions:
(1) ISO unrecognized - download corrupted through Chrome. full full download via Safari
(2) no image available - key not recognized; installed without key (what is a problem?)
I can't boot into Windows 10 but I'm completely blocked because my USB 3.0 is not recognized and wireless networks is disabled. Shows Device Manager there are problems with both but I can't install the drivers for the USB key or can I download the drivers!
I was never introduced to any screen, which indicates that Windows drivers have been installed. I suspect that's the real question although I don't know what steps I missed.
I have tried to format the USB stick in various formats, including the formatting on a Windows PC. No luck. The only thing I saw that I had the chance to try this day uses a USB 2.0 but I don't have one of those lying around.
I don't know how to take screenshots of the dual boot screen, but when I hold down the option key and do the two choice, there is also the possibility to select the network. My wireless network is recognized on this screen, but when I select it, the 'Lock' icon is locked and I can't enter my WPA2 key. I thought that if I was able to connect to my network at this stage, it would be may be available when I start Windows. It's probably unlikely because it seems that the drivers are not installed.
Really don't know what else to try after several days ago. It would be nice if I could get just sort the drivers on this Windows partition...
On the side of OS X, download the drivers from the USB3 flash drive. Download Paragon NTFS for Mac from https://www.paragon-software.com/home/ntfs-mac/ test and install it from the side of OS X (you can use other software that has an equivalent function). This will provide a read-write access to the Windows partition. Copy the contents of the USB in a folder on the Windows partition and boot into Windows and run setup.exe from this location known to install the drivers.
Remove test of Paragon Software.
Tags: Windows Software
Similar Questions
-
Cannot get wifi after installation of windows 8 pro on Dell Inspiron 3000 11 two in one
I got a Dell Inspiron 3000 11 two in one. He had windows 8.1 installed, but I have windows 8 pro and downloaded on my new pc. However, my computer no longer with my WiFi. It does not show a wi fi connection more. My wifi worked until I installed Windows 8 pro and it worked all my other devices when on another laptop, including. It is said that there is no link at all. I tried to turn the wireless switch, etc.
Hi Floyd,
Thank you for your response.
I appreciate your time and your efforts.
You reinstall drivers wireless from the manufacturer's website?
I appreciate the fact that you have already uninstalled and reinstalled the drivers wireless.
However, I suggest you put in day wireless drivers and chipset from the following links and check if it helps.
Network wireless driver
http://downloads.Dell.com/FOLDER02661735M/2/Network_Driver_GY2WC_WN_6.30.223.215_A03.exeDriver Chipset
http://downloads.Dell.com/FOLDER02267754M/1/3148_Chipset_Driver_P5MX8_WN_9.4.0.1027_A00.exeI hope this information helps.
Thank you
-
Pavilion dv7 4270us: no wifi after installation of windows 7
Replaced drive and installed Windows 7. Internet connects only hard cable. Download the LAN drivers. Said that no connection is available. What to know? Computer store. Any ideas on what to do next.
Hi, @Chassell :
Have you installed the drivers wireless and bluetooth for the Broadcom wireless card that your laptop is shipped with?
This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.
File name: sp57965.exe
This package contains software and a driver to support the Broadcom 2070 Bluetooth for models of laptop computers that are running an operating system supported. Of Broadcom 2070 Bluetooth driver works with the Broadcom WLAN driver that supports the NETWORK card in your laptop to enable Bluetooth connections. This package also provides additional Bluetooth profiles.
File name: sp50180.exe
-
No 1110ea audio envy 15 after installation of windows 8 64 pro
No sound on my 1110ea envy 15 after installation of windows 8 64 pro.
Maybe the audio drivers hp are repaced by victory 8 drivers?
ass pls
Hello
Try the driver from the following link and see if it works...
-
What do I need to uninstall Windows 7 after installation of Windows 10?
What do I need to uninstall Windows 7 after installation of Windows 10?
You upgrade from Windows 7 to Windows 10? If so, how it remains on the disk?
If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system. Then it may take wake-up phone to retrieve the old operating system license. Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.
Let us know if that answers your question.
-
Can I install Parallels after installation of Windows using Boot Camp?
Windows on Mac
Can I install Parallels after installation of Windows using Boot Camp?
You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
WiFi doesn't work don't not on vostro 3460 after installation of windows 8
HII,
I have vostro 3460, after installing wireless window 8 works do not, I downloaded the driver wireless dell site, but its not to proceed with the installation
Please help me
OK, I found a solution
-Download the 1 x 1 Dell Dell Wireless WLAN 802.11b/g/n (2.4 GHz), the Bluetooth v4.0 + HS driver (link: Network_Broadcom_W7_A01_Setup-WTD28_ZPE)
-Run the file. It will extract to c:\dell\drivers\WTD28. Then an error/warning occurs and that execution is aborted.
-Open the Windows Device Manager. Find the missing element of WLAN with the yellow exclamation point (here name like 'Network controller')
-Update the driver manually and use c:\dell\drivers\WTD28 as the path of the driver. It will automatically install and start working.
Hope it helps someone
-
No WiFi after installation of XP SP3 on Portege M100
I have a used protégé M100, on which I recently did a clean install of Windows XP Pro (SP3).
Unfortunately, as a novice, I didn't save my drivers.I've been on the Toshiba site and that you have downloaded everything for this model (M100 protégé Centrino), I printed the "content and the order of installation for windows XP" and load all the drivers at best in the suggested order.
However, some items were not available to download, or I did not understand the references.
I downloaded and installed the Atheros client utility and the customer, as well as Configfree utility aironet Cisco, but could find nothing to match the description "wireless driver".
Perhaps because of this, or not? customer utilities above and ConfigFree (connection doctor) as well as some other diagnostic software downloads tell me I have no installed... wireless LAN hardware but I know it's there, and I never got it out!
Can someone tell me what I can do?
Hi George
I think that you just have not installed the right driver WLan.
The Portege M100 was certainly equipped with a wireless network card internal minPCI and you should see it in the device under network card Manager. It should appear as an unknown device (if no driver has been installed) or a Wlan-Intel/Atheros/Toshiba/Cisco card.
Always it is that there are different models of the Portege M100 with different internal minPCI WLan cards and I think you used the incompatible driver.
Please check the single WLan drivers published on the page of the Toshiba driver and check if you allow your internal wireless network card.
In addition, you can use the Toshiba WLan portal to get the latest drivers for the Atheros/Intel cards.
Check this box:
http://APS.toshiba-tro.de/WLAN/Good bye
-
After Installation of Windows 7, it hangs at the splash screen
Original title: could not get windows 7 or Home server to install
There is a computer on which he worked. Put in a new drive, because I wanted to reuse it as a home server.
Now, it will not install, tried Windows Home server and Windows 7, they all have two freeze at the same place.
They both
- boot
- load files
- and then freeze to the windows splash screen.
All of the suggestions.
Thank you
Jeff
Hello Jeff_Myers,
Thank you for the question!
It is disheartening to know that have problems you with Windows 7. As I understand it the computer crashes at start Windows after the Installation of Windows 7.
Method 1:
Disconnect or disable any external devices (printers, scanner, USB (universal serial bus) drives, sound card and graphics card etc.) except the mouse and keyboard and then boot\start the computer.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.
Method 2: Perform the Windows 7 installation disc Startup Repair by using the Windows recovery environment.
What are the system recovery options in Windows 7?
Answer to us if you are having problems with Windows 7 or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
No wifi after windows 10. Uninstall my VPN afterwords, but still a problem of sam.
The keyboard button vill not turn blue. Tryied the Microsoft solution
Hey @Lajen,
You will need to return the system to Windows 7 using your diskettes. All this work and then upgrade to Windows 10 has.
Thank you.
-
Computer cell G6, don't wake up not the mode after installation of windows 8
OK here is the problem, computer works very well with Windows 7 (64 bit), but after the installation of Windows 8 (64-bit) system incounters errors. To put the system to sleep, closing the cover or on its own, during the process of awakening Windows 8 says it has incountered a mistake and must restart and it does on its own. He tries to wake up but freezes and restarts. There is no error code given just that windows has incounterd an error and must restart with a face to frown. I contacted microsoft support and after many hours on the phone, it seems that the bios does not support this feature with Windows 8. BIOS have been updated to the newest bios listed for the upgrade of Windows 8 on the HP website. All the driver have also been updated with those listed for Windows 8 upgrade to the HP Web site.
HP Pavilian G6-1b22ca
Windows 7 Edition Family Premium in Windows 8 pro
BIOS F.48
Does anyone know of a work around or a solution to this problem?
You are the very welcome.
I am pleased to read that you got your laptop in an average point round.
As long as it works well, then it's essential.
Enjoy!
-
Recently, I installed windows7 build7227 on my pc. I want to install virtual xp on it. I downloaded 469 MB "windows xp mode" and "Windows6. 1-KB958559-x 86.msu. After the successful installation of "Windows xp mode" in this regard, I can not install "Windows6. 1-KB958559-x 86.msu. When I try to install it says "this update is not applicable to your computer. How to solve this or my windows is not compatible for the virtual machine.
Nadim,
Virtual PC is not supported on the Windows 7 trial version you have. Once you move to the commercial version full of Windows 7 you will be able to install KB958559. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
USB mouse does not not after update. Windows detects that usb is connected
after update to windows 8 my usb mouse stopped working drivers are up to date and clean. tried turning off then turning, resettlement, but nothing does. After a few minutes that its connected it also plays the "detected usb device" then removed "usb device" ringtone It can be connected to my problem.
Hello
Thanks for the info and sorry for the late reply.
I suggest you to run the Microsoft fixit and see if it helps:
Diagnose and automatically fix the Windows USB problems
http://support.Microsoft.com/mats/Windows_USB_diagnostics
Please reply with the results, in order to help you solve the problem.
Thank you
-
R3000 Presario will not boot from the cd after installation of windows 7
Hello
I have an old Presario R3000, someone updated to windows 7, has a few problems, including the cd player read don't not bootable disc, because I would like to install Vista instead, any suggestions on how to solve this problem, thanks in advance.
chefey aka David
Hi Futoji
Portable office, dismissed plugged DVD and voila, it worked. I have an installation disc Windows 7 Starter and installed as I thought it would be better for! GB of memory, was not bothered with it runs, so Vista, installed fine. Some drivers are missing, sound and player card, as it's XP, so no drivers HP, I have a fixed front sound, means add files in a folder of the directory, will have to google search it again once, thank you very much for your advice, which fixed the problem, I am not too bad for a surfer of money. I know the numbers of the missing drivers, it's just a case of locaing, some of the download sites are very confused. Once agai thanks.
David
-
Network adapter missing after installation of Windows 7 Ultimate on my PC
Hello world
My computer's CPU is Intel Core i3-2120 3.3 MHz.
After you have installed Windows 7 Ultimate, I tried to connect to the LAN, but I found that I had no LAN driver. So I downloaded the driver from the Intel site. I tried to install the lan driver but I get a message that is no network card. I tried some different things but nothing seems to work.
Hi Nitin,
Thank you for visiting Microsoft Community.
According to the issue description network adapter is missing after I installed Windows 7 Ultimate on your computer. The network adapter might need to be reset, or the driver for the card may need to be updated. Try these steps and see if it helps you to solve the problem.
Method 1:
First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.
See the article below to run the network troubleshooter utility.
Using the troubleshooter from network in Windows 7.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2
Method 2:
This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.
Follow the steps in the following article to troubleshoot network adapter.
How can I troubleshoot network adapter?
http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7
See also: Wired and wireless network problems.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
Maybe you are looking for
-
Can I transfer files from my recorder ICD-BX132 to my computer?
Can I transfer files from my recorder ICD-BX132 to my computer and if so, how?
-
I need a wireless adapter for my old desktop PC. I think the WMP54G. Old desktop has XP Pro. Base of PC has Vista Ultimate. Router is a WRT54GL. Network is WPA2 encrypted. I should have no problem, another adapter would be more appropriate? Th
-
"Loving DroidX case feeds on phone.
Since the 2.2 update my phone then turned itself whenever I put it in its case... after of tons of attempts to understand why and to fix and inadvertently screwing my phone, I finally understood this morning that it is: The magnet on the purchased Ve
-
Question cannot install the latest recommended driver Audio Realtek worm 6.0.1.7737, A04 When you point to the location of the driver is generic message > "Windows has determined the software driver for your device is up to date. "Windows has determi
-
DVD drive will burn discs and not read the content
my dvd player will be only burn discs... any time I put in a cd of software or audio CDs, it won't let me veiw content... When I put in a cd of software says "Please insert the disk" and ejects the cd. When I put a CD audo (burned) it gives me just t