After Installation of Windows 7, it hangs at the splash screen

Similar Questions

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Debug build hangs at the splash screen after Update Beta 4

  Since the update of the fall of November, debug builds Dev Alpha hang at the splash screen.

  By release notes, on the basis of known issues:

  "AIR debugger cannot display the IP host dialog box when a debugging session is initiated. This can cause applications to hang at the splash screen and fail to launch. (240219, 242986) »

  A workaround solution is given for people running Flash Builder, where you explicitly give the Debug IP address host instead

  in relying on the auto-discovery.  I use the command line flow (don't have Flash Builder), and my debug builds that were operating out of now drop from September to the start screen. -DebugHost 169.254.0.2, I added to my blackberry-airpackager command and the debug builds always hang.  Release builds signed with my symbolic debugging normally launch, as they did before the update to the decline in November.

  For people who use Flash Builder and who know how to look under the hood and find the blackberry-airpackager command that distributes when you do a debug version: to debug this launch is built successfully

  on a Dev Alpha with the November update, can you please put the blackberry-airpackager command line which

  Flash Builder is running?

  Got a reply from them and they confirmed that the dialogue will be back. Let's make it a part of our test cases in the future.

  See you soon,.

  Dustin

• Photoshop CS6 hangs at the splash screen.

  CS6 hangs at the splash screen and displays a small black box around it.  This happened all of a sudden without new programs have been installed.  I have CS5 and who still works.

  

  After attempting to do as suggested and did not solve the problem, I removed and reinstalled.

  Thanks for all the help.

  Terry

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard

• Upgrade to Indesign CC 2015.5 - does not open and hangs on the splash screen

  I upgraded to CC 2015.5 2015.  After you have installed indesign, it allowed me to open the program once.  After closing the program, any attempt to reopen causes an error pop up during the splash screen that says "Adobe InDesign CC 2015 has stopped working" and leaves the program.  I uninstalled / reinstalled two times with the same results.  Other 2015,5 improvements seem to be fine, only the Indesign program is having issues.  Any advice would be much appreciated on how to fix or revert to the previous version that worked.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Vineet

  (InDesign engineering team)

• CC will not open - hangs at the splash screen

  Had a problem with my video card where he died so I went back to the use of the onboard video. First Pro CC will not open at all. I tried uninstalling and reinstalling several times. All my other CC Adobe software works without problem and the integrated video card has the last update directly from the manufacturer's Web site. When I try to open Premiere Pro the splash screen appears, starts to load, then a Windows error box pops up saying that the program has unexpectedly, he's looking for a solution, says that there is not and the only option is to close.

  Thanks I actually just found the answer on my own - it worked for me: first cc pro trial hangs

• Windows hangs at the splash screen (Windows startup screen), but works after restart

  I encountered this problem recently. On my Dell XPS M1530, when I turn on the laptop after a few hours, windows gets stuck at the start-up screen. I restart it once, and once again, it gets stuck on the start screen. But when I restart twice, windows starts successfully.

  When I turned off the computer and launch until it is physically hot, then windows starts successfully. But when I start the computer after his East become physically cold to room temperature, again the problem starts. I've never seen this kind of problem never or don't want to believe that windows or equipment can be affected by temperatures. It's almost as if windows starts up when the laptop is pretty hot.

  Anyone any idea what the problem is?

  Hello

  As you experience the same in Safe Mode, it may be the case of a faulty hardware or a damaged system file. However, we can run a Microsoft Fix itfirst to troubleshoot your Windows system performance and restart your device after execution of this. If the problem persists, we can also try the System File Checker tool to repair missing or corrupted system files. After execution of the auditor of the files System tool you will see the result, if there is a file system damaged the cause of the problem.

  If there is no corrupted files, it is indeed a defective hardware, and we ask you to contact your manufacturer to resolve the problem suggests. Please see this link for manufacturer support website for your.

  Note: you must enter correctly on your desktop to run the Microsoft it Fix tool and auditor of the files System tool.

  Best regards

  MICAH Bat

  * If this post responds to your query, please click Mark As response *

• Windows XP hangs at the splash screen, safe mode does not work either

  I've updated my laptop with a windows update and when I went to restart, it crashes just in the start screen.  I tried in safe mode hanging at MUP. SYS and I tried the last known configuration.  So far these options do not work.  I tried Memtest, HDAT2, Ultimate Boot CD tests, chkdsk/p and chkdsk/r, Windows XP, CD recovery and rebuild, tried to start up with each opening of USB port and even tried formatting and installing Windows XP Pro SP2 and Windows XP Home Edition SP1.  So far I have always in step 1, where nothing has solved nothing.

  I noticed that there is a thread here where a person has had the same problem and he said that it has updated its BIOS.  For hours, now I did research on how update my BIOS by creating a bootable disc...  I'm thumbs on a mile it looks. Here is a link to the thread with the person who had the same problem. http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/2b3f344c-F923-4D84-868d-c0be603e601b

  I've been on the forums of Toms Hardware for more than a week with a little support, but so far, nothing has worked. http://www.TomsHardware.com/Forum/253683-45-wont-load-hangs-splash-screen#t916360

  I could use any help we can on it.  It would be deeply appreciated!  My email is * address email is removed from the privacy *.

  Well I tried to Win 7 on a bootable disc.  I followed a bunch of instructions I found on youtube.com, but for some reason that I could not burn to disc.  Kept getting an error even if I followed every perfect step.

  In any case, I watched my CMOS on compensation, but the battery is soldered on.  I just messed with it a little bit to see if it was lost or anything thing but I didn't rip out and one other solder on because I have never done this before.  So I put everything back together, turned on my laptop and it finally starts up the Windows installation screen.  FINALLY!  Thanks for everyone's help and patience.  I guess the battery has lost... but not quite sure.  I left the laptop off for about 4-5 days before I tried to play with the CMOS this morning.

  Daavee, thanks for your help on this.  I learned all troubleshooting and making the ISO.  Have a good Christmas!

• Error 17-Windows will not load past the splash screen, and system repair has no effect...

  Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

  Start "openSUSE 11.2 installer (NET)".

  (hd, 1)

  Specifien type is ntfs, partition type 0 x 7

  /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

  Error 17: File not found

  I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

  I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

  Thanks for any help!

  "Off my laptop the night before, an upgrade has been installed as usual."

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows recovery disk 8 in virtualbox hangs on the splash screen

  Hello Lenovo community,

  When I try to install the copy of Windows 8 I got with my Lenovo S440 in a virtual machine environment

  the installation hangs on windows startup screen. I've never seen a Windows 8 installation

  procedure before, so I booted my laptop from the installation media to check if it is corrupted.

  It works very well. A loading circle dot is displayed the logo after a few seconds and that after quiet

  some time the wizard of lenovo is shown... so there must be a problem with the virtual machine.

  I have attached a screenshot to show you where it crashes.

  It would be great help ! Thanks in advance!

  Link to photo

  Note of the moderator; image (s) converted into programming on display images in Forums

  Hello

  I think that reinstall drive wouldn't work on a virtualized machine, only directly on the Lenovo hardware, in order to prevent the copy of Windows, more whatever additional licensed software is on the media, to be pirated.

  My best advice would be to insert a blank HARD drive in Lenovo ThinkPad S440, use the recovery media, produce an installation complete on the HARD drive and then run a program to convert the HARD physical disk to a virtual machine, as Microsoft Sysinternals Disk2VHD.

  Kind regards

  Aryeh Goretsky

• Applications Windows 8 not opening not and windows store hangs on the splash screen

  Basically, none of the applications opens and when I click on the store it will open the screen green spash and then crash.

  I used the troubleshooter of app windows 8, which he says he has solved the problem and asks me to restart, which I do and the apps don't always work.
  I deleted all my recent programs, but this has not fixed it.
  I have now uninstalled my antivirus and firewall, but they still do not work
  Could someone help me solve this problem?
  Thank you

  Hi Tom,

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand from the description of the issue, that the store Windows and applications do not work on your computer Windows 8.

  1. do you receive an error message when you try to launch applications?
  2. is it works much earlier?
  3. using a proxy connection?

  Here are a few methods, we can try that these measures could help set the question of the application.

  Method 1: Please change the resolution and check if that helps.

  a. press Windows + x, click or tap command prompt (Administrator).
  b. navigate to the command prompt, type desk.cpl.
  c. Please change the resolution of the screen 1366 * 768.

  Method 2:

  
  Since you aren't able to access the Windows store I suggest you turn off the proxy connection, and check again.

  a. click the gear box in the upper right corner in internet explore.
  b. click on tools and then click Internet Options.
  c. click on the Connections tab, then click LAN settings.
  d. Select the use a proxy server for your LAN check box.
  e. in the address box, type the address of the proxy server.
  f. in the Port box, type the port number.

  Method 3:
  

  I suggest you to reset the cache to store and check if you are able to open the store.

  To do:
  a. press the Windows key + R
  b. Type wsreset.exe and press to enter.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Tecra S1 does not start and hangs at the splash screen (boot)

  Tecra S1 model PT831E-107EQ-GR

  Problems started a month ago. Randomly, he didn't not started. After some power or off attempts it finally started and worked properly. I bought a new hard drive (Toshiba 40 GB) because it happened more often. I got Acronis True Image and planned to clone a disk to the new disk. The problem is that a cell phone now won't start any more so I can't boot from a CD or hard drive. It stops at the logo 'In Touch... "with text" Press [F12] for boot device selection menu ' and does not react any key. I tried to boot with no CD, no disk hard - the same thing. I also connected internal HD using ATA to USB adapter - even. This means that it is not a disk problem but motherboard, or other components? Is it possible to get into the BIOS before boot selection screen?

  Kind regards
  Jacek

  Hello Jacek

  Try to enter the BIOS to ESC settings initially upwards.
  The question is strange and I do not think that anyone here can offer the exact diagnosis. The fact is, you can use multiple bootable devices but if there is something wrong with the motherboard HARD drive CD/DVD doesn't work. CD/DVD or HARD disk controller is maybe defective.

• T43 - hangs on the splash screen

  Hi all

  I have a G 45-2668 Thinkpad T43 that simply no longer starts. This laptop was not started or loaded for a long time before I got to it. Warranty is exhausted just 1.5 months ago.

  Description:

  -By pressing the results of power on button to start the laptop. Start screen appears and nothing else happens.

  -No reaction if I press the "Access IBM" or F1 button at all. I can not enter in BIOS or any other reaction (no beeps, no error message, no num lock light switch).

  Turns hard disk, CD-ROM prepares.

  What I tried so far:

  -Remove battery and AC-cable, press the power button 10 times for a longer time. Then I plugged the AC cable and pushed F1 during the market. I sometimes start menu. But only rarely. And if I'm here, once again no reaction on the key pressing.

  -J' opened the laptop, if there is no visible problem. It does not exist. After the opening and closing, I could pass once the BIOS, but there was no reaction to pressing any key. So I could not reset the BIOS of some default state.

  -Portable computers will beep but if I remove the card memory.

  What can I do now?

  Please help me.

  Best regards

  Laurence