Pavilion dv7 4270us: no wifi after installation of windows 7

Similar Questions

• No USB 3.0 or WiFi after installation of Windows 10

  OS X El Capitan 10.11.4

  MacBook Pro (retina, 15 inches, end of 2013)

  10 64-bit home edition Windows

  Problems that I encountered so far for which I found online solutions:

  (1) ISO unrecognized - download corrupted through Chrome. full full download via Safari

  (2) no image available - key not recognized; installed without key (what is a problem?)

  I can't boot into Windows 10 but I'm completely blocked because my USB 3.0 is not recognized and wireless networks is disabled.  Shows Device Manager there are problems with both but I can't install the drivers for the USB key or can I download the drivers!

  I was never introduced to any screen, which indicates that Windows drivers have been installed.  I suspect that's the real question although I don't know what steps I missed.

  I have tried to format the USB stick in various formats, including the formatting on a Windows PC.  No luck.  The only thing I saw that I had the chance to try this day uses a USB 2.0 but I don't have one of those lying around.

  I don't know how to take screenshots of the dual boot screen, but when I hold down the option key and do the two choice, there is also the possibility to select the network.  My wireless network is recognized on this screen, but when I select it, the 'Lock' icon is locked and I can't enter my WPA2 key.  I thought that if I was able to connect to my network at this stage, it would be may be available when I start Windows.  It's probably unlikely because it seems that the drivers are not installed.

  Really don't know what else to try after several days ago.  It would be nice if I could get just sort the drivers on this Windows partition...

  On the side of OS X, download the drivers from the USB3 flash drive. Download Paragon NTFS for Mac from https://www.paragon-software.com/home/ntfs-mac/ test and install it from the side of OS X (you can use other software that has an equivalent function). This will provide a read-write access to the Windows partition. Copy the contents of the USB in a folder on the Windows partition and boot into Windows and run setup.exe from this location known to install the drivers.

  Remove test of Paragon Software.

• Cannot get wifi after installation of windows 8 pro on Dell Inspiron 3000 11 two in one

  I got a Dell Inspiron 3000 11 two in one.  He had windows 8.1 installed, but I have windows 8 pro and downloaded on my new pc.  However, my computer no longer with my WiFi.  It does not show a wi fi connection more.  My wifi worked until I installed Windows 8 pro and it worked all my other devices when on another laptop, including.  It is said that there is no link at all.  I tried to turn the wireless switch, etc.

  Hi Floyd,

  Thank you for your response.

  I appreciate your time and your efforts.

  You reinstall drivers wireless from the manufacturer's website?

  I appreciate the fact that you have already uninstalled and reinstalled the drivers wireless.

  However, I suggest you put in day wireless drivers and chipset from the following links and check if it helps.

  Network wireless driver
  http://downloads.Dell.com/FOLDER02661735M/2/Network_Driver_GY2WC_WN_6.30.223.215_A03.exe

  Driver Chipset
  http://downloads.Dell.com/FOLDER02267754M/1/3148_Chipset_Driver_P5MX8_WN_9.4.0.1027_A00.exe

  I hope this information helps.

  Thank you

• Here are two correct graphics for the Pavilion dv7-4270us cards:

  Here are two correct graphics for the Pavilion dv7-4270us cards: ATI Mobility Radeon 6370 AND AMD880G with ATI Mobility Radeon HD 4250?

  An overview chart problems and need to ensure.

  Well, after all the day I found my answer in a review of this laptop on amazon.  That is this HP forum.  I never get help here.

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• What do I need to uninstall Windows 7 after installation of Windows 10?

  What do I need to uninstall Windows 7 after installation of Windows 10?

  You upgrade from Windows 7 to Windows 10?  If so, how it remains on the disk?

  If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system.  Then it may take wake-up phone to retrieve the old operating system license.  Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.

  Let us know if that answers your question.

• Can I install Parallels after installation of Windows using Boot Camp?

  Windows on Mac

  Can I install Parallels after installation of Windows using Boot Camp?

  You can install Parallels, but you will not be able to transfer your license existing if its already active in Boot Camp. You first need to remove the Boot Camp, then you can transfer it to Parallels. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• HP Pavilion dv7-6c20us: HP Pavilion dv7-6c20us - Driver Wifi Win 7 64 bit

   Hello friends, I have an HP Pavilion dv7-6c20us, however not have the Recovery DVD , I format and install windows 7 64 bit and all the drivers and app station operating normally with the exception of Wireles and Bluetooth , already downloaded on the site , however does not work , someone can you help me? Number series: [Personal Information Removed] Product: A7B09UAR#ABAHP Pavilion dv7-6c20us
  
  Thank's
  
  Zenilson Rocha
  

  Hello:

  According to the product specification, your laptop does not come with built-in bluetooth.

  http://support.HP.com/us-en/product/HP-Pavilion-dv7-6c00-entertainment-notebook-PC-series/5169332/model/5218579/document/c03128542/

  The parts list also confirms because the card that your laptop is wireless a Realtek PCIe 8188GN half minicards (HMC) WiFi adapter - 802.11b/g/n 1 x 1, card no bluetooth.

  Here is the link to the wireless card driver you need for this wireless card...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_105197_1&swEnvOid=4058

• Card NVIDIA of Pavilion Dv7 no longer works after warranty repair

  In February, I sent my Pavilion Dv7 (product # A5F93AV, running Windows 7 with NVIDIA GeForce GT 650 M graphics and more onboard Intel(r) HD Graphics 4000) for warranty repairs because he had lost the capacity of the batteries.  While there, according to the Scriptures, HP replaced the motherboard, the antenna wireless (twice) and the bottom of the case.  I received it by FedEx last Thursday, and superficially, everything works well.

  However, over the weekend, I loaded one of my most games intensive graphics (Guild Wars 2) and immediately noticed that the video performance was degraded. FPS fell less than 10, when before repair, the game went very well.  After some digging and run Open Hardware Monitor, looks like maybe running has not been reinstated to the GPU when the motherboard has been replaced and the game (and everything else) are using integrated computer graphics.  The monitor indicates that GPU temperature is constantly 0 degrees, with 0,0%, memory controller GPU load 0,0-0,0% video engine GPU GPU.  The GPU memory runs at a constant 2.8%

  Because it's my first machine, I really prefer is not to return to Texas for another 2-3 weeks.  Is that what I would be able to visually check myself and potentially connect myself without welding? If so, where I would look internally to do? or what should I take to my local repair shop to repair?

  Hi Ja_Q,

  Please contact our technical support at the 800-474-6836. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  They will help you.

  Thank you.

• Pavilion DV7-4270us: Windows 7 cannot locate bluetooth device drivers

  Hello:

  Windows 7 can not find the drivers for the bluetooth headset.

  Any suggestions?

  Thank you.

  Hi Jkhjr,

  There are 2 possible solutions to install the Bluetooth driver.

  You can install 'Broadcom 2070 Bluetooth software and driver' and see if the bluetooth appears in Device Manager. If this isn't the case, please unisntall it and try with ' Ralink/Motorola Bluetooth Adapter Driver.  You can find these drivers in this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-4200-entertainment-notebook-PC-series/4346314/model/5048769

  Select the option "expand all" and with ctrl + f search for bluetooth.

  Hope this helps. !!

  Kind regards.

• HP Pavilion dv6 Notebook PC: I can not turn on Wifi after upgrade to windows 10. Having to uninstall my VPN system

  No wifi after windows 10. Uninstall my VPN afterwords, but still a problem of sam.

  The keyboard button vill not turn blue. Tryied the Microsoft solution

  

  Hey @Lajen,

  You will need to return the system to Windows 7 using your diskettes. All this work and then upgrade to Windows 10 has.

  Thank you.

• HP Pavilion Notebook: No more Wifi after update realtek wireless LAN drivers

  Thus, HP support Assistant said I had to update the 7 things. Including RealTek Wireless LAN drivers. After having done that, I've disconnected my wireless network. When I click on the internet icon in the bar below, it shows only a "Airplane Mode" button and that's it. Before, it would also show all available networks. I don't know what I have to do, but I need a quick fix!

  Peppers

  Hello;

  Let me welcome you on the HP forums!

  I read your post about the loss of WiFi after a driver update and wanted to help.

  I see that you are running Win10.  Then, click the start menu and open the Device Manager.

  When you find the wireless network device, try rolling back the drivers to the previous version.  With a little luck, after you do this and you reboot, the WiFi will work again.

  And if it works, then disable HP Support Assistant so it won't mess up your drivers more.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• WiFi doesn't work don't not on vostro 3460 after installation of windows 8

  HII,

  I have vostro 3460, after installing wireless window 8 works do not, I downloaded the driver wireless dell site, but its not to proceed with the installation

  Please help me

  OK, I found a solution

  -Download the 1 x 1 Dell Dell Wireless WLAN 802.11b/g/n (2.4 GHz), the Bluetooth v4.0 + HS driver (link: Network_Broadcom_W7_A01_Setup-WTD28_ZPE)

  -Run the file. It will extract to c:\dell\drivers\WTD28. Then an error/warning occurs and that execution is aborted.

  -Open the Windows Device Manager. Find the missing element of WLAN with the yellow exclamation point (here name like 'Network controller')

  -Update the driver manually and use c:\dell\drivers\WTD28 as the path of the driver. It will automatically install and start working.

  Hope it helps someone