No USB options shooting Vibe

Similar Questions

• Satellite U840-111 - Boot USB option not seen unless

  With the help of the Ultrabook I have prepared an "emergency" Ubuntu USB boot image (LinuxLive used to transfer a .iso downloaded to a USB device) on an SD card in a USB - SD adapter (the map is to a USB port, not the SD slot).

  It worked well.

  But when I restart the Ultrabook using F12 to see the Start Menu there is no text next to the USB option in the start menu (and if I select the boot option I see Windows start as usual).

  If I select the option in the Bios on the F12 boot menu to go to the Boot menu in the BIOS I still don't see any text on the USB line.

  If now, I re - feed and use F12 I now see "Mass Storage Device" (or something equivalent, can't remember) on the port USB line and the machine now boot Ubuntu on it (and I can see the file system on the hard drive).

  As far as I know, you need to enter the BIOS Setup, but do nothing) before using the F12 boot menu if you want to start on a USB (well this one at least).

  This seems to be a bug in the BIOS? BIOS version is 1.4

  Not quite sure if it s a bug or not.

  To my knowledge, the USB boot option to flinch F12 menu until a USB compatible and put up-to-date device should be plugged.
  This means that you must connect a bootable USB device to the laptop and then power the device and press F12 to get the menu.

  I also read that all the devices can be fully compatible so it would be really interesting to know if the same question is displayed using a bootable USB flash memory key you've tried a combination of USB SD adapter I could be possible that it is the problem here.

• Where's my USB option...

  Hey guys,.

  This leads me into the wall...

  Yesterday, I installed a copy of Windoze 10 on my rMBP. I downloaded the ISO of M$ burned external (300 GB - single, I got!) through BCA, partitioned and installed. Everything is good with the world.

  Today, just a day later, I'm doing the same thing with another rMBP, but although they share the same OS, the BCA interface is completely different... Where I had yesterday, on my main machine, three options (check boxes) - burn the ISO on USB, download the drivers and installation, now on the secondary zone, I can only select an ISO (just the files - no USB option selector) and the partition. What is crack? The two report version 6.0.1 (522), why so radically different?

  I converted my USB disk in an ISO image (through disk Utils, I deleted the original when everything goes well, yesterday), ridden by BCA, set a 80 GB for Windoze partition and press the button install. It seems to download the drivers (who are actually on the image in any way, because they were placed there by the 'other' BCA yesterday), but the bombs, saying: there are not enough disk space to continue. Unfortunately it does not say which drive. Surely not ISO, which has no meaning, and both partitions are more than 80 GB, which should be more than enough space even for Windoze...

  I tried the hack plist on a copy of the BCA, but no effect.

  Any ideas or help appreciated.

  Danny

  UPDATE: I have not updated my comp card - both machines are running El Capitan 10.11.2

• All vmware products does boot from USB option in the bios?

  All vmware products does boot from USB option in the bios?

  Hello

  No it is not yet possible. I hope that this will change, but not at the moment.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• elitedesk: win7, can not find the usb option during the click on F9

  Hi all. I am a tech. I work with a new book of win7/elite that was just reimagee. Having problems connecting to the network. I had planned on all rebuild. He lets me click F10 to start sequence & save. But once I have restart & F9-click there is no option for me to boot on the USB. Really need these devices ended tonight. Thank you

  I'm sorry that this is not a laptop. It's an elitedesk of HP with win7 / 32 bit.

• Redirect USB option

  Hi guys. Before somewhere I red on USB redirection options. I want unilateral redirecting USB configuration. The customer to only light VM or block of VM USB redirection for thin client. Is this possible?

  Environment: vMWare vSphere 5, vMWare View 5. Version 8 of virtual equipment.

  Ah, I understand now. You probably want to look into something similar to the following: http://communities.vmware.com/thread/300141

  There may be another option, but I have not heard of him. I hope that someone will be able to shine more insight.

• Re - activate the AutoPlay for USB (option-list in right click) device

  Win-7 - 64-bit, 16 GB RAM, SSD drive (C)

  All of a sudden, when connecting a Flash stick or Player cards and just clicking on... the function "Auto Play", with the drop-down list - is GONE!
  I used to go there, select "Download images with Adobe Bridge" - to transfer images in bridge
  I read that the Microsoft eliminated the AutoPlay for security reasons... feature updates?
  Please see also this link: (I'm I was wondering if it is save to do as suggested below.) (or any other suggestions?)
  I checked my: his game to 0x000000FF (255)
  Thank you

  In the following registry key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer and possibly (but not necessary in my case) in: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  The value:

  "NoDriveTypeAutoRun" set you 0x000000FF (255) which I discovered disables Autorun on all devices.

  Set this value to decimel 145 (the default value).

  Another value (I have not confirmed that they are correct)

  0x1 disables autoplay on drives of unknown type. 0x4 disables autoplay on removable drives. 0x8 disables autoplay on fixed drives. 0x10 disables autoplay on network drives. 0x20 disables autoplay on CD-ROM drives. 0x40 disables autoplay on RAM disks. 0x80 disables autoplay on drives of unknown type.

  0xFF disables autoplay on all types of readers.

  Hello

  The function of auto run if not used correctly could lead to the breach of security. That feature could have been disabled by an update, there are still options made to enable it again. He has the discretion of users to use it again or not, based on how often or more often they use the service. As you already know, there is section that will allow you to disable or enable the feature by using Fix - it.

  Thank you.

• Portege A600 - start option disappear from USB after update BIOS 3.00

  USB boot option seems to have disappeared the BIOS boot sequence small after that I installed the bios 3.00. I wonder why this happened and how can I get him back.

  Hello

  normally, the boot USB option is available and you can select the modi supported in the bios settings.
  In an enterprise environment, it is possible to disable the USB as a device to start with special tools. In this case yo ushould ask your administrator.
  If you are a private customer, you should visit an ASP.

• NB500-107 - no option in the boot on USB

  Hi experts,

  Help, please. I can't do my NB500 begin on an external DVD - rom because there is no option in the BIOS, only the HARD, LAN and Fdd drive... I replaced my faulty HDD... Please help

  Thank you...

  When you start your press NB Please F12 to get into the boot menu. USB option is listed here?

  In General, Toshiba offers small tool for installing on USB recovery image. This bootable USB key can be used for recovery image installation.
  You created this USB key in the past?

  Out of curiosity: what operating system you want to install?

• USB boot option just don't not using uefi

  I am trying to install windows 7 64 bit. my hard disk partition type is TPG. But Usb boot option does not come in UEFI boot mode.

  If I choose the start for Legecy support option, then the usb option comes, but I want to install win 7 64 bit in the uefi.

  I have already created the USB bootable in uefi gpt mode by using diskpart as mentioned in other topics. Also tried with rufus.

  BIOS settings:

  G50 Lenovo 70

  Safe boot: disabled

  Start mode: uefi

  Quick start: disabled

  Boot USB: enabled

  Operating system optimized defults: other os.

  Format hard drive: TPG

  When I boot, only option "EFI PXE Network" comes. Not boot from usb option

  Help, please

  Thank you

  
  

• Recovery Manager has no option for usb. Is there an updated version?

  Hello

  I'm on the edge of a HD crash and everything will create the recovery media.

  I took the first steps in the instructions, but then the Recovery Manager program does not have an option to 'media', as suggested in the support article. I hate the disks and they often end up getting damaged or lost somehow. Is there a place that would allow me to use the USB option to square one update or I'm stuck having to go buy the DVD?
  If this is the case, you must update your bandages to mention that only some versions allow the USB option.

  I'm on windows 7

  Thank you.

  Thanks for the reply.

  I got a 64 GB and a 32GB on the spot and I tried both on each port on the system.

  They worked like USB drives, but has never had the option in the Recovery Manager.

  I gave and went and bought the DVD. It worked.

  In case it is of any relavence to update your support pages or leave a customer in the future knowledge, the version I have is 5.5.1931. To find this information right click the exe (you'll find my clicking on "position to open the file" in the properties of the shortcut, when you right click on the shortcut on the start menu) and select the Details tab.

  Thank you.

• the external drive BIOS boot option usb missing

  I am trying to boot from an external USB device.  I have a DELL with a Pentium M with WINDOWS XP.  I entered Setup via pressing F2 at startup.  I changed the BOOT SEQUENCE so that a USB storage device is top of the list.  I rebooted the computer & F12 key to display the options of start & USB device are not yet listed.  As far as I can tell when the computer starts, it uses the internal hard drive & not the USB device.  This computer has more than 1 USB port.  Y at - it a specific USB port I need to use, or is not properly enabled USB option because I don't even see it not as an option when I press F12 at startup.  If it is not properly active how can I do so?

  I am trying to boot from an external USB device.  I have a DELL with a Pentium M with WINDOWS XP.  I entered Setup via pressing F2 at startup.  I changed the BOOT SEQUENCE so that a USB storage device is top of the list.  I rebooted the computer & F12 key to display the options of start & USB device are not yet listed.  As far as I can tell when the computer starts, it uses the internal hard drive & not the USB device.  This computer has more than 1 USB port.  Y at - it a specific USB port I need to use, or is not properly enabled USB option because I don't even see it not as an option when I press F12 at startup.  If it is not properly active how can I do so?

  I think that I activated correctly now, I see the USB option when I press F12.  I don't know why it does not appear initially, but it does now.   Now, I have a related associated error hal.dll missing or corrupt.  I started another thread on this question, so if anyone has knowledge on this departure: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/imaging-an-xp-system-on-an-external-harddrive/adcf7894-bd6e-4fcd-94d0-3b1894e8020c

• My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection

  Greetings:

  I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer.  I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord.  I'm not find no possibility to install it as a usb printer.  Please help as soon as possible.  I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had that problem w/Dell.  (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.)  that option is absent in my attempts).

  Thank you!

  Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor.  at this point, I plan to return to the model of costco and return to dell.  Thank you for your help.

• Probe reading USB Audio option not there - Dell XPS 15

  Hello

  I wanted to use the USB option out for better digital sound. When I go to the sound > playback I only see one option of Realtek HD audio. Even the digital output HDMI is not seen.

  Can someone advice how can I load the USB audio option out. I checked all the hidden devices in device under his management and do not see this option

  Running windows 8.1

  Thanks for your help

  scothernman

  a dynamic power mix

  Without knowing the model of the mixer, it is difficult to say, but if it is a model such as the PDM L405 it won't work. This model and other similar are analog mixing tables. The laptop won't see this table of mixing as a device usb audio. The mixer is equipped with a usb port accessories in order to play music from a type of mp3 player flash player, but the port isn't supposed to be a connection to a computer.

  scothernman

  When I connect HDMI to the TV, it connects directly and there is no other choice highlight and the TV screen are mirrored on the TV

  Sorry, but I've put everything I know about audio HDMI in the FAQ. If the instructions in the FAQ on the cables, ports, drivers and connection steps are met, but you still get no sound, I can't think of anything that you can do.

• Satellite T230-12V - can't boot from USB

  Hello

  I have a Satellite T230-12v and I decided to change the hard drive for a faster SSD.

  The problem is that I can't just boot from a USB pen to install windows 7.
  The pen works fine.
  The SSD is properly found in BIOS.
  The pen is in the boot options.
  Seems that the BIOS is always keep me to start appropriate.

  I have succecefully started a prompt back from the pen of USB, but not the Original Windows 7 I have here.
  I can't boot from dvd because the laptop is not a.

  Can someone point me in the right direction?

  The original HARD drive is not an option, I don't have it anymore.

  Please advice.
  Thank you

  Miguel Pereira

  When you start your Satellite F12 press to enter the boot menu.
  USB option is listed here? Have you tried this option?