No video in the Source or the monitor with PremierePro 2014 update program
Since the update from yesterday, I now have video now in my source or program monitor. Reads the audio. When I insert a clip from the source monitor bin, I can see previous/exit points. The strange thing is that I can see the reading on my external screen, but not in the software. I tried to reset preferences with no luck.
Apple OSX 10.9.5, 32 GB of RAM
AJA Kona convince
Adobe Premiere Pro 20141 (8.0.1 build)
How can I fix?
Customer Care Chat helped solve the problem.
Had the Mercury playback engine to software only. I had to also off connection/re-edit some audio files that were not reading in the timeline panel.
There was also a lot of permissions that had to be repaired.
Tags: Premiere
Similar Questions
-
In one sequence, no reading of the video in the monitor, but audio is heard. What I did?
Clips from mov H.264 same when it is resolved in the new movie plays ok?
Thanks Ann & Glenn,
I hit accidentally the toggle track output 'EYE' key, and turned off the monitor, to the left of the handle of the opacity, in 6 years on other Premiere Pro I've never done that dark screen has not helped, even automate to sequence seemed to disappear into CS5.5.1. But all is now well, thanks to you two, he gave me the idea.
Kind regards
Bob
-
Photo of reminder on the monitor with the vertical strips/stripes blue and Red
Play a clip in the timeline, the monitor and the xetrnal monitor shows the clip with thin red vertical lines/bands at constant distances.
The AVI in body 5.5 clip plays, I imported it to the 5.5 even as asset, but playing the AVI in still image is distorted, as mentioned.
I work in PAL.
Anyone suggestions what's happened and how to eliminate the distortion? Thanks for the reply.
Chris
If you have an nVidia graphics card, and then set the 3D settings 'let the application decide '. Vertical scratches should disappear.
-Jeff
-
How to open the labview with function of Labview program to stop smoking inside?
Hi any idea how to open the labview with the Labview function program to stop smoking inside?
I forgot to add and define the condition of the type for this program.
If the program is an application, she closed immediately.
If it is still the work of labview, it will go directly to editing without closing the program.
I so need to retrieve, open it and make some changes.
Clement
Place the VI in a project and open it from there, then it should not autorun. App.kind application property allows you to decide whether to close or not.
/Y
-
Whenever I try to install I get message that he had failed. The error code is U44M1P7. What is the problem with this update?
U44... Update error http://forums.adobe.com/thread/1289956 can help
At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager
I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
Toshiba Gigashot A100 FE can't see videos on the monitor of the cam
Hello
I have a big problem with this camcorder.All of the programs that I cannot read the Hd support and if I connect MY camcorder to the TV, it seems very broad and I don't see any screen that appear on the LCD of the cam.
The program comes with the bug of cam with 2 PC with Vista and XP.
I can t see my work except in the cam monitorHelp me, if there is a solution
Excuse my English bed I m from France
Thank youHello
Have you checked the cam settings? There you can set TV out and choose between 16:9 and 4:3 output. You have a 16:9 TV?
> The program bundled with the bug of cam with 2 PC with Vista and XP.
Sorry, but this is not understandable to me. What so you mean exactly? You have access to the data and if you connect your can on the PC? -
No video in the monitor of the program - WARNING "Media pending".
I use first Pro CC v8.0 on Mac OS X Yosemite 10.10.1. The last time that I had worked on this project, while I was still on Mac OS X Lion 10.7.5, I had no such problem. Not sure if it's related to that or not. In the right top box video, the display shows just "media pending." I can click on the video bar itself and it is displayed in the upper medium video and plays. I know that the files are linked. Render as green in this sequence shows, but are red and yellow in another while having the same problems.
Any ideas?
Thank you
Ron
Post edited by: Kevin Monahan
Reason: need a better title
I finally found another discussion with a related issue. They said that I have to cut my preferences, or something like that, but the simple solution was to copy the files on the timeline and paste them into a new sequence. I did and it works in the new sequence.
-
No video in the playback with mercury HW mode window
Hello
All of a sudden there is no video shown in the window reading, the source monitor, and when you play the thumbnails in the media browser or viewer of the project. This only happens when you use the hw of mercury playback mode. I use a computer portable 64-bit windows 7 with Nvidia GTX 660 M video card and Adobe Premiere CS6. Even the installation of the last beta driver from Nvidia (340.xx) has not solved the problem.
Please advice!
Kind regards
Den Dulk of Bart
Hi Bart,.
Another user suggests this: 'You can try to adjust video Image settings in the NVIDIA Control Panel to use the NVIDIA settings rather than the video player settings'.
If this does not work, can we get a little more information? You can answer these questions: FAQ: what information should I provide when you ask a question on this forum?
Thank you
Kevin
-
Equium A100-147: can not play videos from the site with WMP
When I try to play videos from a Web site, I get an error message. "Windows Media Player received. Error message Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »
ERROR CODE DOOD11D2My computer settings are set out at the time of purchase. Is this normal?
Hello
I think the error messages says that everything you need to know:
You can not read the file because:-Is the file may be in use
-you won't have access to the computer where the file is stored
-your proxy settings are may not be not correctThe proxy settings must be defined on use web browser proxy settings, you can find the setting when you open the WMP and tab marks the Protocol HTTP and meadows configure network.
-
Running windows 7. Any new system. Videos will be executed for the screen saver, but there is no sound. What's wrong?
How does this relate to the features of Windows Update?... .for windows Live Photo Gallery?
You will find support for Windows Live Photo Gallery in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3
-
Availability of the monitor with Netmonitor
Hello
I'll put up Netmonitor for monitoring some devices. Until now I just he followed a single device to test. For some reason it isn't send me an alert if I cut the communication to the device. All the settings are default, and made sure the rule is enabled. I don't know I'll be facepalming here in a minute when I have someone pointed out something quite obvious, but I am at a loss at the moment. I disabled the network card on the device, I'm following up on 15 minutes ago but still not alert. So far, I have installed the cart of the OS, created the Netmonitor agent and activated, edited the list of devices to include the device I want to monitor and make sure the rule is enabled. Is there another step I'm missing?
Thank you
Ryan
In this case the error looks a bit different, looks like there is no list of devices, you can start the agent and then edited the list of devices (which requires a restart of the agent).
Can you please disable the agent and reactivate it?
You can also publish a snapshot of the screen that displays a list of devices?
If you are not comfortable posting on the community, you can send it to me [email protected]
Golan
-
close the monitor with the fn key (I think)
Pavilion dv6. Play a game with the intention of hitting f4 *, I enabled to place a special order, I've never used with a laptop: a symbol that looks a bit like a monitor - a square flanked by two vertical lines. Screen went black.
I tried esc and tried to hit the same control button. Without optimism, I tried Ctrl-alt-delete. I looked for a simple keyboard map, but I can't find one.
All help find my screen is appreciated. TIA.
* VERY annoying as the default is not the fn, but the special order.
Hello
You may need to, but first, try closing it as follows.
Press the Windows key once, press the right arrow once and then hit enter: wait a minute to see if this will allow windows to shutdown properly.
Kind regards
DP - K
-
I have Windows 7 Home edition. I have download IE 10 and can't watch the videos on IE or Chrome. I went to the Internet and reset all default Options. Still no image for the video. Any ideas?
Hello
1. this happens with all sites or with any specific Web site?
2 have had any changes made to the computer before the show?
Please follow the steps in the link.
Videos won't play or Web pages do not display correctly
http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-10-win-7
-
Cannot add the signature with preview after updating pages 5.6.2
I've just updated Pages 5.6.2 on my Macbook Air from mid-2012, and now, open the doc in the preview, I can't drag my signature on my document. I used this feature all the time before update and it worked perfectly. Why they keep fixing things that don't need fixing?
Open documents in the overview pages are read-only. Preview will give you the illusion that you can apply the Tools menu: annotate: Signature, but you can not.
Export this document Pages in PDF format. Open this PDF in preview, and now you can apply and position your signature annotation as a layer on the PDF preview
-
Replacement of the other with Microsoft Essentials security programs
I need to be convinced that the removal of my Norton internet security and its replacement by Microsoft Essentials are a good idea. How do they compare? Make ME all that makes Norton? Help, please.
Why do you "need to be convinced? I don't consider my work to convince them that nothing, but I don't mind give you my opinion. Most of the technicians that I know and I did not recommend Norton for many years. The last good version was 2003 Norton Antvirus and it was 7 years ago. IMO the only security solution worse than Norton's McAfee. Bloated, invasive and ineffective. I recommend NOD32 (commercial) or Avast, Avira or MS Security Essentials if you want something for free instead. MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Whenever I open Firefox, I get the following error:Error: TypeError: netscape.security.PrivilegeManager is not defined I never had this before. Where did it come from? What it means? How can I get rid of him?I use Firefox 24.0 on a desktop Lenovo Vis
-
End of 2008 MBP 15 inch 2.4 Ghz SSD disorders!
I've really hit a wall with this and was wondering if its worth even more of my money and time or if I should return the SSD I bought & just save for a Mac Mini. I used a Sandisk 960 GB SSD (which since I traded for a 960 GB PNY because Sandisk appea
-
Lenovo IdeaPad A1000 stuck on recovery mod
HI, I have Lenovo ZTE A1000, he blocked on the Lenovo logo at the start, I tried the reset (button / stop + go-to top flight) and tried all the options that appears on the recovery screen, but do not work, please help me, I don't have enough knowledg
-
Strange error of blackBerry Smartphones
I can't send emails, sms or messages of any kind. whenever I try to compose an error message comes up saying: Eception exception: net.rim.device.api.i18n.MissingResourceException. Anyone know what this means?
-
What format to use when you try to download videos on instagram or even try to send an e-mail
What format to use when you try to download videos on instagram or even try to email them