No visible map in Linghtroom

Similar Questions

• HP Pavilion 1313ax g6: Wireless works do not, impossible to install ralink driver.

  I have recently reinstalled Windows on my laptop, HP pavilion 1313ax g6. Once I did, I noticed that the wifi was not working. I opened the device management and he had yellow exclamation points on Ethernet controller, network controller, PCI Device and SM Bus controller. I thought it was a driver problem, so I downloaded the driver from the HP Web site but nothing helped. The pilot was not installing. She opens the configuration wizard and close abruptly. Then, nothing happened. I downloaded the driver from the website of Mediatek too and the installation process has completed, but there is that still no change in Device Manager isn't the visible map in the settings of the adapter in the control panel network and sharing Center.

  Any help would be greatly appreciated.  I have this very urgent need.

  Hello:

  According to the list of parts for your laptop, it comes with a combination of Atheros 802.11b/g/n 1 x 1 9485GN adapter WiFi and Bluetooth 4.0 3012.

  http://PartSurfer.HP.com/search.aspx?SearchText=A9R40PA

  This would explain why the Ralink WiFi adapter driver does not work.

  You need these drivers for the Atheros card bluetooth and wireless...

  This package contains drivers for the supported Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp54972.exe

  This package contains the driver for the Atheros Bluetooth installation package in the notebook models and operating systems.

  File name: sp55714.exe

  Ethenet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55083.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55085.exe

  SMBus Controller:

  I zipped and tied the smbus controller driver you need below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• Very slow access to network between Windows 7 64 and XP 32 readers

  Nice day

  Recently, we have replaced a dying man computer of Windows XP with a new Windows 7, i3, 4 GB RAM with full 100Mbit network card, which is operating quite smoothly. This computer has a very necessary shared folder, the folder F1000.dta for Acomba, what is needed by other users. One of these users work with a 32-bit of Windows XP Professional SP3 with 2 GB of RAM and 100Mbit ethernet card. Given that its a 7 / XP share, all sharing on the Windows 7 computer options have been configured (only show network, sharing of citrine, no password, etc...)

  The problem now is that while the shared folder is visible, mapped as a network drive, it takes about 5-7 minutes to open the mapped "drive/folder" and a 1-2 minute goo whenever one of its subfolders is accessed. I tested the cable connecting the computer to the network with 3 laptops (running Windows 7 Starter Edition, Vista Home and Vista Ultimate) and all were able to access the drive a few seconds (for 7 Starter) for a decent 10-15 seconds for Vista machines.

  Acomba, it should be noted, does not work from this mapped folder, but is installed locally on each computer. Only the file data that contains the documents of the company for Acomba, is shared and accessed remotely.

  Is this a normal problem between XP SP3 32 bit and 64 bit of Windows 7 Professional, or am I wrong configured something?

  Thanking you in advance,
  Greg Jean-Louis

  Hello

  Journal of computers support sites download the latest NIC drivers and force the installation.

  Download the drivers and extract them to a folder of your choice.

  Since an Admin account.

  In Device Manager, right click on the adapter, http://www.ezlan.net/Win7/net_dm.jpg

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  -----------------------

• FRM:40106: No navigable element block of destination

  I am in the form of oracle 11 g 2 get this error when the page is about to load FRM:40106: no navigable element block of destination

  I ensure at least one element whose property "Insert-Allowed" / "Update-Allowed ' on 'Yes' and one in the block with the"Keyboard navigable"property Yes (and this element must also be displayedon a canvas and Enabled)

  Hello

  PLS, make sure that you first point navigable block is enabled, visible & mapped to the canvas of main content.

  You have a go_block?

  Amatu Allah.

• Just of MC can be hidden with manages on their behalf?

  Hello

  Flash CS5

  is there a suffix command to meet the following needs?

  I need to hide the beginning all MovieClips has _Level2 and _Level3 at the end of their name.

  I don't see anything on google or Flash for this, which would be the coding for lock on MC with certain characters in their names?

  _Level * generic method would work or is it enough to have just _Level or mention of the suffix _Level2 and suffix _Level3?

  makeAllVisibleF (false);  is not the way to do it!

  Its a map where these settlements of MC with _Level2 and _Level3 will only appear selected in a DataGrid, but the rest of the visible map from the outset.

  I also need code to add a suffix to a name of a datagrid. When the user has progressed in the view of the map, they are then at level 2 and as they glide on the name of the grid for example Reach of neck, code provides ColletsReach for MC showing purposes and must be suffixed him _Level2. When they move to another part of the map, then he needs to add to the name _Level3 instead.

  A Flash AS3 a suffix in order to deal with all this?

  Envirographics

  I can't tell where you might find the information you are looking for.  For my part, it's a question of learning for a long time (the learning never ends).  You could try to take some formal programming classes if you have never before.

  The vertical bar that you request is not a letter.  It is a vertical bar characters and must be the right key on your keyboard, above your key on a standard keyboard.  When you put two of them together like that, add a condition where to logic, which means... if(this || that)... said... If (ANY)

  I noticed that you rarely mark responses as answered, nor useful.  You need to do that because it benefits others who use the forums and search for postings said.

• My own Google Map icons are not visible in Firefox 8

  I have lots of Google Maps on my site, and they contain icons by default Google and my own icons, each with its own URL. They work fine in all other browsers and Firefox 7. However, yesterday, I loaded Firefox 8. 8 Firefox Google the default icons are still visible, but my own icons are now invisible, but their placeholders are still there. They are still visible in other browsers. In addition, if, now, I try and add one of my icons on a map, the process seems to work fine, including a landmark name appears, but the icon is invisible. The invisible icon is certainly there because you can click on the marker and be caught in the right position on the map for editing, but the icon is not visible.

  Thank you.

  I put the question on the forum MozillaZine Web Standards Development/evangelism to the http://forums.mozillazine.org/viewtopic.php?f=25 & t = 2359775.

• WRT1900AC - devices shown on the network map is not all visible in Windows 7 Explorer

  I just bought the router 1900AC as substitute of plugin for my previous WRT54GL router using DD - WRT.

  Each of the Linksys routers is configured for an IP 192.168.2.1 and each is configured to assign the device of intellectual property within this subnet.

  Each router works (not at the same time of course) when it is attached as a secondary router behind my Telus ActionTec V1000H DSL Modem/Router.  All my LAN devices with Gb ports are now much faster.  Internet speeds are tremendous.

  However, with the new 1900AC, my PC under Windows 7 router only see each other in the network of Windows Explorer pane.  In the content pane, I see my two Western Digital MyBookLive and my printer HP Laserjet devices, as well as media devices on my network.  But if I try to access a file (such as Notepad) and I select the network node, only the other PC appears in the list.

  The network of the 1900AC map shows all devices without any problem.

  The old WRT54GL router has also had no problem display all network devices.

  Can anyone suggest how I can do all the devices visible to my Windows 7 Explorer?

  WD (MyBookLive and MyBookLiveDuo) devices are connected to the ethernet ports.  Tablets connected via radio (a 2.4 Mhz and the other double 2.4 / 5.0 Mhz).

  After rally for second level support technology of LinkSys and waiting for their call, I saw what I knew, and since all devices appeared in the plan of network from the router, but not in Windows 7 is the router, or my windows firewall should block devices.

  My McAfee control center using I dropped the firewall and refreshed the Win7 network view - and all of a sudden all of the appliances were visible.  Problem solved.

  Then, I entered a new rule of connectivity that disable the firewall for all devices in the range * 198.162.2, introduced the firewall to the top and then restarted my PC.  All devices have remained visible after restart.

  Since each Windows PC has its own firewall, I repeated the process for my second PC.

  I have concluded that when Windows 7 sees a new router assigns a new network name and the network name does NOT inherit from the previous router settings - even if the routers have identical IP addresses and assign IPs client on the same subnet.

  For the benefit of third parties, if the router sees your devices but your windows PC does not work, drop your firewall and refresh your network view.  If the devices will be displayed, you must configure your firewall to let all devices in your same subnet.  This should apply to any firewall on any version of windows, I suspect.

• Can not find MAPS for location of people

  I have set up an address book and added names and information about this person, but I can't find a map for everyone that I select?

  First of all, you must have visible Contact pane: on the view/presentation/Contact address book pane. Then, to show the "Get Map" button in the Contacts pane, the contact must have work tab of the properties of the contact or data in the field address on the private sector.

• Non-visible text of contacts in Outlook

  Hello
  I suffer from the same issue that I found posted anywhere on the internet this morning - my Contacts list is illegible because the text is barely visible, as if the map is too small for the space allowed.

  I have:
  My cache of dumping
  Played with the zoom and CTRL - sets all the text to view, but at this time, it is too small to read.
  Checked the section tools/options/content - minimum size fonts the value 'none', web sites set their own sizes.
  All my browsers / add ons etc are up to date
  It looks fine in IE, but I don't use IE

  What else is there?

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• HP 15-p036tx non-visible wireless adapter

  I bought a new HP 15-p036tx and installed a windows 8. The wireless card was not visible in network adapters. I tried to install all the drivers of network, but the Broadcom drivers are give and error and exit.

  Please provide me with the details of the map used in this laptop wireless.

  I've updated to windows 8.1, his work.

• USB-6211: analog input signal affecting another of the same map AI

  Hello

  I use the DAQ-nor-6211 map and DAQmx features to read a hammer and a signal of the accelerometer and then use other LabView functions to make the FFT of these analog input signals. However, it seems that the analog inputs where the hammer and the accelerometer are connected generate a kind of noise or influence in other entries of this data that is not connected to any other sensor acquisition board.

  I've had different experiences in order to check if the problem is with reading the card: put the accelerometer and hit the dog in another table where the DAQ card table was located (to avoid the vibrations on the map and a possible noise), ai1 entry was logged on the differential mode on the dog and the ai4 of entry is connected to the output (z axis) of the accelerometer. The other 2 ai2 and ai3, entries that can also be read by my LabView program, are open (i. e., any other sensor is connected to the card). When the structure where the accelerometer is located is struck by the hammer, the signal of ai2 ("x axis" seen in the first attached document) has a curve (on the time domain) which initialize almost at the same time that the hammer and the a3 of entry has a weak signal, but with the swing as well as the signal of ai4. The document "hammer ai1 + z_axis connected_ _x_axis disconnected ai2 + y_axis ai3 ai4" images that I captured the chart created in LabView. On these graphs, it is possible to check on the FFT the ai3 signal and ai4 has the same behavior (with different intensities), and enlarged figure of time domain image, we can see that the signal of ai2 increase almost at the same time of the signal of the hammer (ai1). The signal picked up by the sensors are probably creating a sort of noise on open entries ai2 and ai3.

  Another experiment was conducted to check if the signal from a single entry that may affect the signal read from each other near the entrances: the DAQmx task Create channel had a physical channel has changed: ai3 entry has been modified by ai7 (maintain the same connection mode: differential), and the results are visible on the second attached document. In the graphs obtained in this experiment, it seems that the entrance of the hammer (ai1) affects the signal of input ai2 and ai7, which are not connected. And the ai4 signal does not seem to influence the other inputs, because he has a different curve on the graph of the FFT.

  The same experiment was conducted using the CSR connection (change threads and create the DAQmx Channel Configuration), but the results were the same as those found using differential connection.

  Finally, if the output of the accelerometer is connected on the ai2, the signal of the other open entries ai4 and ai7 seem to be affected by the signal of the accelerometer on ai2 (last document attached).

  Could you tell me if the problem I encounter is caused by the DAQ card with this information that I gave to you? And if the answer is Yes, do you know if there is a way to avoid this noise create in one entry on the other hand, it please?

  Thank you

  Maybe Ghosting or crosstalk? Just an idea.

• LabVIEW Crash after graphical mapping and line_style field have been changed

  Hello everyone,

  I had a very specific problem that occurred to me mainly by 'chance '. But the error is reproducible every time I tried it.

  I'm under LabVIEW 2012 (German) on a Lenovo PC with Windows 7.

  The VI that generates the error adapts the appearance of a chart according to the type of data that must be drawn.

  I have attached the blockdiagram of VI as an image.

  The chart is part of a VI that is inserted into another VI as a secondary.

  Issue VI performed as follows:

  (1) take the data in a table of waveforms.

  (2) check to see what type of data it is, and take the form of style information a type definition.

  (3) set the graphical style for X and Y axis: Autoscale?, reversed?, Grid_Colors, (linear/logarithmic) mapping, limits, Axis_Style, Offset and factor

  (4) put the waveforms in the chart in order to ensure the right number of plots for step 5 (data must also take anyway.)

  (5) iterates on the plots and value: line width, color, style, Style of Dot, visibility

  (6) to force a refresh.

  If I perform all of the above steps the VI blocks between step 4 and 5. This leads to a failure of LabVIEW to 100% time, need to LabVIEW and ended with the Task Manager. In about 5% of cases my entire operating system goes down, too.

  The error will NOT occur if I do only one of them:

  (1) use waveforms 'empty '. This means that the table does no data points.

  (2) do not change the mapping of an axis any. (linear logarithmic or vice versa)

  (3) does not change the line of off-road style.

  In the case of mapping it makes no difference if the change is not made or if new mapping is the old mapping. In both cases the error will not occur.

  For me, the solution was to remove the line Style change. I can live with that.

  My Question is now: is that what someone knows why this happens?

  Kind regards

  Sebastian

  Hi Sebastian,.

  This does not seem like a common problem. The behavior that you see in your application is probably due to a lot of load on an item in a very short time. Have you tried to do a little slower, perhaps with a wait between the two?

  A refresh of a graphic element, espescially if there is a lot of data points already inside, takes a lot of load on the system, it's probably why the system doesn't crash if there is no data in it points.

  Do not modify all properties of a live Widget in a single cycle.

  Kind regards

• The directory of the user on the mapped network drive

  I want to move my user directory C:\Users\Edwin to a mapped network drive E: (i.e. mapped from a network share \\\\192.168.22.9\share ).

  The difficult part is to move the directory of the user himself. I found 2 possible solutions, which are not applicable for me due to my use of a network drive.

  1. Move C:\Users\Edwin" to "E:\Users\Edwin , and then use a symbolic link of junction ( mklink -J ) to post a link to C:\Users\Edwin .

     This does not work for me because I can't create a symbolic link to a directory on a non-local drive junction.

  2. Changing the value of registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ProfilesDirectory of %SystemDrive%\Users to E:\Users before you create the user "Edwin".

     Later, when the "Edwin" user first connects, the profile will be in E:\Users\Edwin .

  The problem is that I met a problem of the egg and the hen.

  When you first login as a user 'Edwin' profile will be created in E: . However, at the moment I first login, the mapped network drive E: is not there.

  I tried without success to the following:

  1. Create a drive mapped persistent administrator. Did not work. The mapped drive is only visible to the administrator user.

  2. Create a mapped drive persistent using the rights system (using PsExec -s ). Did not work. The mapped drive is not 'owned' by anyone, not even the current administrator user.

  3. Create a drive mapped persistent by using the user newly created by Edwin, without opening a session as Edwin again (using the PsExec once again). Did not work. It is possible to create a mapped drive under a different name, once I tried to do it with persistence ( /persistent:yes ), I get a Access is Denied error.

  No idea how this can be done? Or is it it even can be done at all?

  Hello

  What version of Windows are you using?

  Related topics:

  http://social.technet.microsoft.com/Forums/windows/en-US/9389cbc5-4e4f-4f4c-83fd-4ab8fdec51ec/not-all-network-drives-reconnect-when-windows-is-switching-automatically-from-offline-to-online?forum=w7itpronetworking

  http://social.technet.Microsoft.com/forums/Windows/en-us/60a5e7b0-c972-416F-B24C-b7d4018156cc/Windows-7-missing-mapped-drive?Forum=w7itpronetworking

  Try to repost the question to the TechNet Networking Forum

• All user accounts Windows XPrestricted open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder

  Hello

  you have a problem with my Windows laptop that left me speechless.

  I would really appreciate if someone could provide a solution or any ideas where to start fixing this, as I get close to return to the previous backup full system, but reluctant to do so as I have never done it before so I'm worried if it really works as supposed (Macrium and Ping).

  1. description of the problem

  All users of Windows XP (SP3) restricted accounts open all of a sudden 'Map network drive' by clicking on the desktop and the "research" by clicking on any folder, including My Documents.

  However, all accounts administrator work as before and also user accounts work like so usual, they are included in the Administrators group, with respect to the clicks of the workstation and records.

  In addition, the correct icons for 'Drive' and 'Record' are visible when connected as long as administrator but lacking when logged as long as user restricted when you check the file associations by "open the folder and then click on Folder Options in the Tools menu.» Click the registry file types list. »

  2 solution unsuccessful attempts

  2. google and tried the solution to manually change the registry entries from Microsoft: http://support.microsoft.com/kb/321186

  "
  Start the editor of the register (Regedt32.exe).
  Look for, and then click the default value under the following registry keys if this problem occurs with folders:
  HKEY_CLASSES_ROOT\Directory\shell
  If this problem occurs with drives:
  HKEY_CLASSES_ROOT\Drive\shell
  Click on edit in the Edit menu.
  Type 0 in the value data box, and then click OK.
  Exit the registry editor.
  "

  (Fixit associated meanings has also not working for some reason, says that the Windows Installer does not run, don't know if the same problem...)

  2B. and then also tried the fix "regsvr32 /i shell32.dll" at http://blog.chron.com/helpline/2005/10/double-click-opens-search-instead-of-folder/.

  After these steps, the registry under "Drive" and "Directory" information are as attaché at the end read somewhere there should be a "find" under lock and key, as I have, but don't know if the subkeys under 'Search' are what causes weird behavior.

  If anyone knows and could provide what the values for the registry values must be in a system that works, would be nice to compare to possible problems.

  Unsuccessfully, with what precedes, to solve the problem, but noticed through that:

  2 c. When you are logged in as administrator, I am able to see and modify the registry keys concerned with regedit, considering that when logged in as a regular user, I get an error that translates roughly as "the key could not be opened [consultation]?.» Error in opening the key. "for"Default icon"and subkeys 'shell' to 'Drive' and some subkeys under"shellex ".

  Oddly enough, this is also the case even if I "Run with" regedit as a user belonging to the Administrators group when logged in as a limited user.  Could be the mechanism of Windows registry access.

  Noticed that the small group 'Users' did not have access to "Drive". Grant read access, even as the "directory" and other registry keys next to them, for "users".

  Now see the values of registry as a limited user, but the problem persists. Do you really know what to try next, after spending hours Googling for answers.

  3 computer laptop environment and other factors

  3. don't know if it's related, but perhaps that coincides the time and the possible reason of sage:

  I had the problem two days ago described in "account Administor doesn't have access to some files and registry entries" to http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_27415496.html.

  Zone alarm free firewall prevented changing the key of HKLM\SOFTWARE\Microdsoft\Windows\CurrentVersion\Run.

  Which was fixed as in the article above tweaking of Zonealarm settings so that changes are allowed.

  3. the environment of the laptop:

  Acer Travelmate 8204 laptop

  Windows XP SP3 with virtually all updates of installed Microsoft.

  Recent issues (related?) with the .NET Framework 4 updates and the repair facility. FixIt against MS to install MS Update and the Application works and reveals no problems, but the settings from-> Panel-> Add or Remove Applications said that it cannot change or delete NET Framework 4.

  ZoneAlarm Free Firewall version: 11.0.000.057, prevented possible culprit get earlier access to the registry, uninstall?

  Norton Antivirus version recently installed 20.3.1.22, possibly in conflict with ZA or bug?

  content 'Repertoire' 3 c registry key.

  HKEY_CLASSES_ROOT\Directory]
  "AlwaysShowExt"=""
  "EditFlags" = hex: d2, 01, 00, 00
  "ToolTip"="prop: DocComments.
  @=""

  [HKEY_CLASSES_ROOT\Directory\Background]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex]

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\ACE]
  @= "{5E2121EE-0300-11D4-8D3B-444553540000}"

  [HKEY_CLASSES_ROOT\Directory\Background\shellex\ContextMenuHandlers\New]
  @= "{D969A300-E7FF-11d0-A93B-00A0C90F2719}".

  [HKEY_CLASSES_ROOT\Directory\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 33, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Directory\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Directory\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Directory\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EDSshellExt]
  @= "{29FF7AB0-BE34-4992-A30B-53A9D86EE239}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\EncryptionMenu]
  @= "{A470F8CF-A1E8-4f65-8335-227475AA5C46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\IObit Malware Fighter]

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\Washer]
  @= "{6EE51AA0-77A0-11D7-B4E1-000347126E46}".

  [HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\CDF]
  @= "{67EA19A0-CCEF-11d0-8024-00C04FD75D13}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\FileSystem]
  @= "{217FC9C0-3AEA-1069-A2DB-08002B30309D}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Monitor]
  @= "{7842554E-6BED-11D2-8CDB-B05550C10000}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\MyDocuments]
  @= "{ECF03A33-103D-11d2-854D-006008059367}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Nokia]
  @= "{416651E4-9C3C-11D9-8BDE-F66BAD1E3F3A}".

  [HKEY_CLASSES_ROOT\Directory\shellex\CopyHookHandlers\Sharing]
  @= "{40dd6e20-7c17-11ce-a804-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\UltimateZip DragDropHandler]
  @= "{2F860D82-AF3C-11D4-BDB3-00E0987D8540}".

  [HKEY_CLASSES_ROOT\Directory\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Directory\shellex\PropertySheetHandlers\ {ef43ecfe-2ab9-4632-bf21-58909dd177f0}]
  @=""

  3D 'Drive' content registry key.

  [HKEY_CLASSES_ROOT\Drive]
  @= "Asema.
  "BrowserFlags" = dword:00000008
  "EditFlags" = d dword:000001 2

  [HKEY_CLASSES_ROOT\Drive\DefaultIcon]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73, 00, 68, 00,------.
  65.00, 6 c, 6 c, 33, 00, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 2 c, 00, 38, 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\Drive\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Drive\shell\find]
  "SuppressionPolicy" = dword:00000080

  [HKEY_CLASSES_ROOT\Drive\shell\find\command]
  @= hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00, 74, 00, 25,.
  00, 5 c, 45, 00, 00, 78, 00, 70, 00, 6 c, 00 6f 00, 72, 00, 65, 00, 72, 00, 2nd, 00, 65, 00, 78, 00,
  65,00,00,00

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec]
  @= "[FindFolder (\"%l\ ', % I ')] ""
  "NoActivateHandler"=""

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\application]
  @= "Folders."

  [HKEY_CLASSES_ROOT\Drive\shell\find\ddeexec\topic]
  @= "AppProperties".

  [HKEY_CLASSES_ROOT\Drive\shellex]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Advanced SystemCare]
  @= "{7C8D3E6A-13A6-4D8F-BF77-D267D0F9AC21}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\COMODOBackupUtility]
  @= "{FA66022E-2FE4-4A29-916C-84A0D8173FBB}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\CWDDriveMenuHandler]
  @= "{CCEFA845-DCDB-4A2F-8BED-DBE87CD198EC}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\GizmoShellMenuExt]
  @= "{AF859436-B9BD-4154-B594-2B8D1F4295A6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Glary utility]
  @= "{72923739-5A47-40A3-9895-25AF0DFBB9E4}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\LavasoftShellExt]
  @= "{DCE027F7-16A4-4BEE-9BE7-74F80EE3738F}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Offline files]
  @= "{750fdf0e-2a26-11d1-a3ea-080036587f03}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ReflectShellExt]
  @= "{DEBB9B79-B3DD-47F4-9E5C-EA6975BAB611}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\SDContextExt]
  @= "{70F8E90E-353A-47AB-B297-C576345EE693}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\Symantec.Norton.Antivirus.IEContextMenu]
  @= "{FAD61B3D-699D-49B2-BE16-7F82CB4C59CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {59099400-57-11CE - BD94-]

  0020AF85B590}]

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {D6791A63-E7E2-4fee-BF52-5DED8E86E9B8}]
  @= "Menu of portable devices.

  [HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\Eraser]
  @= "{BC9B776A-90D7-4476-A791-79D835F30650}".

  [HKEY_CLASSES_ROOT\Drive\shellex\DragDropHandlers\WinRAR]
  @= "{B41DB860-8EE4-11D2-9906-E49FADC173CA}".

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions]

  [HKEY_CLASSES_ROOT\Drive\shellex\FolderExtensions\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""
  "DriveMask" = dword:00000020

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\Sharing]
  @= "{f81e9010-6ea4-11ce-a7ff-00aa003ca9f6}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ShellExt]
  @= "{0B0D0025-9D78-43BF-84EF-6F308AC4D0CE}".

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {1F2E5C40-9550-11CE - 99 d - 2]

  00AA006E086C}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {596AB062-B4D2-4215 - 9F74-]

  E9109B0A8153}]
  @=""

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {B 7988, 573 - EC89 - 11cf - 9 c 00-

  00AA00A14F56}]
  @=""

  [{ECCDF543-45CC-11CE - B9BF - HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\

  0080C87CDBA6}]

  [HKEY_CLASSES_ROOT\Drive\shellex\PropertySheetHandlers\ {fbeb8a05-beee-4442-804e-409d6c4515e9}]
  @=""

  It seems that I managed to solve the problem on my own. Did two things:

  1 set the registry keys determine programs associated objects 'Répertoire', 'Drive' and 'File' to the default values by using the settings found here: http://www.dougknox.com/xp/file_assoc.htm

  HKEY_CLASSES_ROOT\Directory\
  HKEY_CLASSES_ROOT\Drive\
  HKEY_CLASSES_ROOT\Folder\

  2. If you want to have permissions for group 'Users' to read all these keys in the registry. For some reason any access worked only partly for standard users.

  Not sure who finally solved this problem, but after I had finished 1. and 2. for the purpose of 'Record', by clicking on 'My computer' and any folder works normally for all users of the computer.

  I suspect that some recent installation of program which adds actions associated with these objects messed up the registry. Suspects are Norton Antivirus and dbPowerAmp.

  Thanks for the suggestions for this problem!

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx