No Wifi status

Similar Questions

• delete the wifi connections?

  My wifi status shows in the menu bar. It shows every WiFi only close to home. Too much. How to show only my preferred connections which is my routers 2.5 ghz and 5 GHz? See the image

  Go to all your neighbors and tell them to turn off their WiFi base stations.

  Move to a less densely populated area.  Something where your neighbors are 300 + feet should reduce your list very much.

• HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

  Mobile: HP Elitebook 8560p
  Bios: 68SCF worm. F.6.1
  Modem: AGERA Systems HDA Modem
  HP hs2340 HSPA + Mobile
  Network: Intel (R) (R) Centrino Advanced - N 6205
  Intel (R) 82579LM Gigabit Network Connection

  OS: Windows 10.0 (build 10240)

  I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

  The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

  I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

  Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

  If anyone can help?

  A big thank you!

  Sip2sip

  Uninstall the access key and button wireless driver

  Reset

  Open Device Manager, run the dirver update

  shouldn't this go

  Download Connection Manager

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

  Install the program in Compatibility Mode in Windows 7

• process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

  I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

  Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

  

  We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

  Turning off the Time Capsule

  Wait a few seconds

  Put in the Time Capsule market and let it run a full minute

  Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

  On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

  Just below this list, click on AirPort Express

  

  Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

  

  In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

  Click Next

  Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

  

  When you see the message Setup is complete, click done. Close the installation window, and you're done.

• I don't see the apps or the lock screen

  When I turned on my iPad air all I could see was the time wifi status and battery %. The screen is in this context, and I could not zoom or use anything except the notification on the top settings and fast on the bottom bar. My son is a huge computer guru and he said that he has never seen anything like it! Someone please help.

  Try a reset by pressing the power button / stop and the "home" button until you see the Apple, then let go.

• Beats Audio Software missing?

  Well, I did the manual update that was sent via the HP Support and when he finished, and I went to change my Settinga Audio Beats, it was not a toggle (for her) where I had placed it (near the wifi status indicator). There is now an icon that looks a little like Greek sigma and said a letter (when I scroll on it) ' * IDS_SYSTRAY_TOOLTIP '. Help?

  Hello

  Try installing the Audio driver by using Recovery Manager option.

  Click Start in the search type Recovery Manager, and then click it once select Yes on user access control, and then select I need immediate help and then select driver & select recovery requires the Audio driver and install it and then restart the device.

  Or you can also try to do a system restore to the date where unit was working fine.

• Camera Foscam wireless to the Valet M20 router connection.

  Try to install two cameras Foscam on my PC (windows 7). The "OUTSIDE" camera is model F19805W and 'The INSIDE' a F19831P model. The works of a single 'INSIDE' ok as a device connected wireless; However, cannot get 'OUTSIDE' unit to connect the Cisco Valet Plus M20 router wireless. 'OUTSIDE' it connects ok directly connected to the router. Have had two phone conversations with Foscam support and they never stop checking out me with the help of Cisco. This is editing information for both cameras.

   

  Device status:

                 Status = success for both cameras NTP

  DDNS = disabled for both cameras status

  UPnPStatus - disabled for both cameras

  WiFi status = connected to WhiteBear (INSIDE) (OUTSIDE) not connected

  The session state:

  Username / IP = joec01 for both cameras / 192.168.1.149, 192.168.1.149 and 192.168.1.101 for both cameras

  address joec01 IP/username extra / 192.168.1.101 for (OUTDOOR)

  IP configuration:

  Get the IP of the server DHCP = check for both cameras

  Wireless settings:

  List of networks: SSID = WhiteBear of both cameras

  Encryption = WPA/WPA2 for both cameras

  Password = same for both cameras

  PPPoE use PPPoE = disabled for both cameras

  DDNS = enable DDNS disabled for both cameras

  = UPnP activate UPnP 'no' for both cameras

  Port: HTTP Port = 88 of both cameras

  Port HTTPS = 443 for both cameras

  ONVIF Port = 888 for both cameras

  P2P (the OUTDOOR unit is not that a P2P device... below relates to the INTERIOR only.

  UID = FFW99WJPXVYV2G6MURD1

  Select the checkmark = P2P

  P2P port = 59898

  Foscam support tells me that the router does not accept the WhiteBear password for the OUTSIDE camera (it is the same as that used for INSIDE camera and smart phones).

  Any ideas? Similar problems were reported with the Foscam cameras?

  Joe

  Try to set M20 «WPA2 only» wireless security

• How can I retrieve the Beats Audio and remove * IDS_SYSTRAY_TOOLTIP?

  My new laptop of Beats Audio HP Pavilion m7 is not a manager of Beats Audio, but it doesn't have a weird white icon with a V on the side black that says "* IDS_SYSTRAY_TOOLTIP". When I click on, I get nothing useful, and giant text appears on my screen, that I can't remove, unless I restart ("Please click on a site to start or enter the first letters to search.")

  This woman has a similar problem (found in a forum announcement):

  Well, I did the manual update that was sent via the HP Support and when he finished, and I went to change my Settinga Audio Beats, it was not a toggle (for her) where I had placed it (near the wifi status indicator). There is now an icon that looks a little like Greek sigma and said a letter (when I scroll on it) ' * IDS_SYSTRAY_TOOLTIP '. Help?

  Hello

  It seems that the sound driver is not correctly configured, then try the following.  (Note: even if the message refers to the ID, the offending Installer is the codec IDT audio just be confusing )

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57966.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• If my ipv6 connection says "no internet access" what it dose average?

  I check my WiFi status and find dialog box iPv6 connectivity: no internet access

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• How I got notification of Wifi on / Off status?

  Hello

  My rquirement as below

  -J' I need notification when the user enable or disable wifi.

  I got the signal on bluetooth technology, but for wifi, I don't get any signal.

  I am waiting for your positive response please reply me as soon as possible.

  Take a look at this - it works for me. Everything I do is to delay the wifi control up/down status for a few seconds whenever I get a network change event to allow the interface change complete.

  #include "NetworkMonitor.hpp"
  
  NetworkMonitor* NetworkMonitor::_instance;
  
  NetworkMonitor::NetworkMonitor(QObject *parent)
      : QObject(parent)
      , _initialised(false)
      , _networkWasAvailable(true)
      , _wifiWasAvailable(true)
      , _timer(new QTimer(this))
  {
      QObject::connect(_timer, SIGNAL(timeout()),
                         this, SLOT(onTimeout()));
  }
  
  NetworkMonitor::~NetworkMonitor() {
      if (_timer->isActive())
          _timer->stop();
      QObject::disconnect(_timer, SIGNAL(timeout()),
                            this, SLOT(onTimeout()));
  }
  
  NetworkMonitor *NetworkMonitor::getInstance(QObject *parent)
  {
      if (_instance == 0) {
          _instance = new NetworkMonitor(parent);
      }
      return _instance;
  }
  
  void NetworkMonitor::start() {
      initialise();
      setNetworkInitialStatus();
      setWifiInitialStatus();
  }
  
  void NetworkMonitor::stop() {
      _timer->stop();
      terminate();
  }
  
  void NetworkMonitor::initialise() {
  
      qDebug() << "XXXX NetworkMonitor::initialise() starting..." << endl;
  
      bool initialised = true;
  
      if (bps_initialize() == BPS_FAILURE) {
          initialised = false;
          qDebug() << "XXXX Error: BPS failed to initialise" << strerror(errno) << endl;
      }
  
      if (netstatus_request_events(0) == BPS_FAILURE) {
          initialised = false;
          qDebug() << "XXXX Error: Failed to request Netstatus BPS events" << strerror(errno) << endl;
          bps_shutdown();
      } else {
          qDebug() << "XXXX Registered for Netstatus BPS events OK" << endl;
          subscribe(netstatus_get_domain());
      }
      _initialised = initialised;
  }
  
  void NetworkMonitor::terminate() {
      qDebug() << "XXXX NetworkMonitor::terminate entered ..." << endl;
      netstatus_stop_events(0);
      unsubscribe(netstatus_get_domain());
      bps_shutdown();
  }
  
  void NetworkMonitor::event(bps_event_t *event) {
      qDebug() << "XXXX NetworkMonitor::event() entered ..." << endl;
  
      int domain = bps_event_get_domain(event);
      if ((netstatus_get_domain() == domain) &&
          (bps_event_get_code(event) == NETSTATUS_INFO)) {
              handleNetStatusEvent(event);
      }
  }
  
  void NetworkMonitor::handleNetStatusEvent(bps_event_t *event)
  {
      Q_UNUSED(event)
  
      qDebug() << "XXXX NetworkMonitor::handleNetStatusEvent() entered ..." << endl;
  
      setNetworkStatus();
      if (!_timer->isActive()) {
          _timer->start(5000);
      }
  }
  
  void NetworkMonitor::onTimeout()
  {
      if (_timer->isActive())
          _timer->stop();
      setWifiStatus();
  }
  
  void NetworkMonitor::setNetworkInitialStatus()
  {
      if (networkAvailabile()) {
          qDebug() << "XXXX Network Initially Available" << endl;
          _networkWasAvailable = true;
          emit networkAvailable();
      } else {
          qDebug() << "XXXX Network Initially Not Available" << endl;
          _networkWasAvailable = false;
          emit networkNotAvailable();
      }
  }
  
  void NetworkMonitor::setWifiInitialStatus()
  {
      if (wifiAvailabile()) {
          qDebug() << "XXXX Wifi Initially Available" << endl;
          _wifiWasAvailable = true;
          emit wifiAvailable();
      } else {
          qDebug() << "XXXX Wifi Initially Not Available" << endl;
          _wifiWasAvailable = false;
          emit wifiNotAvailable();
      }
  }
  
  void NetworkMonitor::setNetworkStatus()
  {
      if (networkAvailabile()) {
          qDebug() << "XXXX Network Available" << endl;
          if (!_networkWasAvailable) {
              qDebug() << "XXXX Network changed to Available" << endl;
              _networkWasAvailable = true;
              emit networkAvailable();
          }
      } else {
          qDebug() << "XXXX Network Not Available" << endl;
          if (_networkWasAvailable) {
              qDebug() << "XXXX Network changed to Not Available" << endl;
              _networkWasAvailable = false;
              emit networkNotAvailable();
          }
      }
  }
  
  void NetworkMonitor::setWifiStatus()
  {
      if (wifiAvailabile()) {
          qDebug() << "XXXX Wifi Available" << endl;
          if (!_wifiWasAvailable) {
              qDebug() << "XXXX Wifi changed to Available" << endl;
              _wifiWasAvailable = true;
              emit wifiAvailable();
          }
      } else {
          qDebug() << "XXXX Wifi Not Available" << endl;
          if (_wifiWasAvailable) {
              qDebug() << "XXXX Wifi changed to Not Available" << endl;
              _wifiWasAvailable = false;
              emit wifiNotAvailable();
          }
      }
  }
  
  bool NetworkMonitor::networkAvailabile()
  {
      netstatus_info_t *info;
      bool available = false;
  
      if (netstatus_get_info(&info) == BPS_SUCCESS) {
          if (netstatus_info_get_availability(info)) {
              available = true;
          }
          netstatus_free_info(&info);
      }
      return available;
  }
  
  bool NetworkMonitor::wifiAvailabile()
  {
      qDebug() << "XXXX NetworkMonitor::wifiAvailabile()" << endl;
  
      bool available = false;
  
      netstatus_interface_list_t iflist;
      netstatus_get_interfaces(&iflist);
  
      qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - num_interfaces=" << iflist.num_interfaces << endl;
  
      for(int i = 0; i < iflist.num_interfaces; i++) {
  
          netstatus_interface_details_t *details = 0;
          netstatus_get_interface_details(iflist.interfaces[i], &details);
  
          if(details) {
              qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - i/f details Available" << endl;
              const char *name = netstatus_interface_get_name(details);
              netstatus_interface_type_t type = netstatus_interface_get_type(details);
  
              qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - i/f name=" << name << endl;
              qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - i/f type=" << type << endl;
              qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - is_up=" << netstatus_interface_is_up(details) << endl;
  
              if (type == NETSTATUS_INTERFACE_TYPE_WIFI) {
                  if (netstatus_interface_is_up(details)) {
                      qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - Found a WiFi i/f in UP State" << endl;
                      available = true;
                  } else {
                      qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - Found a Wifi i/f in DOWN State" << endl;
                  }
              }
          } else {
              qDebug() << "XXXX NetworkMonitor::wifiAvailabile() - i/f details N/A" << endl;
          }
          netstatus_free_interface_details(&details);
      }
      netstatus_free_interfaces(&iflist);
      return available;
  }
  

• BlackBerry Smartphones have wifi but no IP address (Status: IP address is no longer valid)

  Dear experts,

  I can connect my Pearl 9100 to my home Wi - Fi network, but I can't connect to the internet.  For example, when I run the browser, I get the message «Unable to connet to the Internet...» ».

  I can see on my router that Pearl has been assigned an IP address DHCP vi (just as one would expect).

  Of "manage connections / Options Wi - Fi profiles registered Wi - Fi to select my profile / tools WiFi / Wi - Fi Diagnostics ' I see that" Local IP address: "is empty and that"status: IP address is no longer valid"

  I assume something is wrong on the bead, because it does not accept the TCP/IP configuration served to him by my server DHCP (my wireless router).

  Someone at - it recommendations for helping me solve this problem?

  Here are a few other details to consider:

  All other wireless devices work on my home Wi - Fi network, including a Blackberry Bold 9780 running OS 6.

  My Pearl 9100 has OS v.5.0.0.748.  This is an operating system updated Blackberry specific to my carrier (Bell), of the 5.0.0.604 OS, which came on the device.

  I don't have a data plan on my Blackberry (you may think it strange, but well, it's the way I want it).  The Bold 9780 which has connected to my home Wi - Fi network has either a data plan.  The absence of a data plan should not be a problem because all I need an Internet connection for is the occasional use of the browser when a Wi - Fi connection is available for free.

  Thank you in advance for any advice, tips or pointers.

  Hey - I found the solution:

  Options / Mobile Network / Data Services - change from 'OFF' to 'ON '.

  I guess I was mistaken in thinking that "Data Services" should only be enabled if you have a data plan.

  Maybe this will help you more...

• I accidentally turn off my WIFI! When I go to it says disable 'status' HP wireless assistant but no, where do see how to activate it again, can someone help please!

  hen I go to it says disable 'status' HP wireless assistant but no, where do not see how to activate it again, can someone help please!

  I went to something help I have and it says to reboot my laptop, press F10, then go to system configuration > integrated device options > LAN/WLAN switching > activate. I restarted my laptop and pressed F10 but it come with the system configuration...

  Hi you can access device manager and enable you WLAN, or simply more portable computers HP come with a button to toggle WLAN, please check the color of the light wireless button and press again to see if it changes color, if not you have successfully activated the WLAN again.

  You can also try

  1. Reboot the laptop.
  2. Press F10 .
  3. Enter the BIOS .
  4. Select Advanced options .
  5. Select the Device option , WLAN/LAN switching.
  6. Switch to Activate .
  7. Select save changes and exit .

  If you could tell the laptop model and the version of the operating system you use that I'll be able to give you more accurate and simpler measures

• can not access the internet even if my wifi connection status is "enabled", I go to another user and am connected, get updates and others and have the ability to nav.

  Windows 32-bit Vista on a HP laptop, wifi is on State is enabled and still on the past of the main user unrelated real, even when the State is supposed to be activated, I went my way, any other user and get the updates to download and other connect ability.  Can someone help me change it's for a 76 year old mother, who gets very nervous sometimes with the laptop that I gave him, help me please... Stevielee

  Hi Stevielee,
   
  1 you get an error message when trying to go online?
  2. what web browser do you use to go online?

  You are able to go online to a different user account. There must be a problem with the settings of the web browser. Try these steps and check the result.

  Step 1: Reset the Internet Explorer settings.
  1. Click Start, type inetcpl.cpl and press to enter.
  2. click on the tab advanced and then click Reset.
  3. click on reset.
  4. When you are finished, click Close, and then click OK.
  5. close Internet Explorer and reopen it before the changes take effect.
  6. check internet connectivity.
   
  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  For more information on "Tips for solving problems with Internet Explorer", visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Step 2: If the problem persists after you follow step 1, try to correct the user account.
  Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to get the status of wifi?

  Hello

  I need to know when the phone is connected to a wifi network.

  Thank you

  I was all over the Internet and back looking for a way to determine not only if the WiFi is enabled, but it also if it is connected. Every 'solution' I found online actually reported only if WiFi is upward or down, not its connection state. However, I was able to adapt to a suggestion of code maarko to do exactly what I needed. Here's the function I created:

  #include 
  
  bool onWiFi() {
      bool retVal = false;
      char* interface;
  
      if ( BPS_SUCCESS == netstatus_get_default_interface( &interface ) ) {
          netstatus_interface_details_t* details = NULL;
          if ( BPS_SUCCESS == netstatus_get_interface_details( interface, &details ) ) {
              retVal = ( netstatus_interface_get_type( details ) == NETSTATUS_INTERFACE_TYPE_WIFI );
              netstatus_free_interface_details( &details );
          }
          bps_free( interface );
      }
  
      return retVal;
  }
  

  This function returns true ONLY if the WiFi is turned on AND connected as the default interface.